If the specified units are started at the same time as this unit, delay this unit until they have started.

A file containing the auth key

Local address to bind to

When to run the update

Definition of systemd service units; see systemd.service(5).

Whether to enable systemd in initrd

Reload nginx when configuration file changes (instead of restart)

If the specified units are started at the same time as this unit, delay this unit until they have started.

If the specified units are started at the same time as this unit, delay this unit until they have started.

If the specified units are started at the same time as this unit, delay this unit until they have started.

If the specified units are started at the same time as this unit, delay this unit until they have started.

If the specified units are started at the same time as this unit, delay this unit until they have started.

Issue the reloadxml command to FreeSWITCH when configuration directory changes (instead of restart)

If the specified units are started at the same time as this unit, delay this unit until they have started.

If the specified units are started at the same time as this unit, delay this unit until they have started.

If the specified units are started at the same time as this unit, delay this unit until they have started.

If the specified units are started at the same time as this unit, delay this unit until they have started.

If the specified units are started at the same time as this unit, delay this unit until they have started.

If the specified units are started at the same time as this unit, delay this unit until they have started.

See torrc manual.

The name of this systemd unit, including its extension

The name of this systemd unit, including its extension

The name of this systemd unit, including its extension

Name of the UKI

The name of this systemd unit, including its extension

The name of this systemd unit, including its extension

The name of this systemd unit, including its extension

The name of this systemd unit, including its extension

The name of this systemd unit, including its extension

The family name of the font within the package.

The name of the user account

The name of the user account

The name of this systemd unit, including its extension

The name of this systemd unit, including its extension

The name of this systemd unit, including its extension

The name of this systemd unit, including its extension

The name of the group

The group's name

The name of the theme within the package.

The name of this systemd unit, including its extension

The name of this systemd unit, including its extension

The name of this nylon instance.

The name of the user account

The name of this systemd unit, including its extension

The name of the system used in the system.build.toplevel derivation

The family name of the font within the package.

The family name of the font within the package.

The family name of the font within the package.

Name of the zone.

The name of the group

Name of the PPP peer.

The name of the theme within the package.

The name of the theme within the package.

The name of the theme within the package.

The name of the icon theme within the package.

The name of the network interface to match against.

Etcd unique node name.

The endpoint name.

The endpoint name.

The name of the icon theme within the package.

The name of the icon theme within the package.

The name of the icon theme within the package.

Name of the PAM service.

Specific name of the application.

Username for JSON-RPC connections.

Shell commands executed to stop the service.

If the specified units are stopped or restarted, then this unit is stopped or restarted as well.

Text of this systemd unit.

The name of the cursor theme within the package.

Name of the worker

Primary name for use (as a suffix) in:

• systemd service name,
• hardened user name and group,
• systemd *Directory= names,
• desktop application identification,

Primary name for use (as a suffix) in:

• systemd service name,
• hardened user name and group,
• systemd *Directory= names,
• desktop application identification,

Start the specified units when this unit is started.

Packages added to the service's PATH environment variable

Name of the action.

Name i2pd appears in UPnP forwardings list.

Shell commands executed after the service's main process has exited.

Units that want (i.e. depend on) this unit

Shell commands executed to stop the service.

If the specified units are stopped or restarted, then this unit is stopped or restarted as well.

Shell commands executed before the service's main process is started.

Name of modem device, will be searched for in /dev.

Name of the image

Like ‘requires’, but in addition, if the specified units unexpectedly disappear, this unit will be stopped as well.

Start the specified units when this unit is started.

Specifies the Name of the Storage daemon.

Packages added to the service's PATH environment variable

Units that want (i.e. depend on) this unit

The name of the node which is used as an identifier when communicating with the remote nodes in the mesh

Shell commands executed as the service's main process.

Shell commands executed after the service's main process is started.

Shell commands executed when the service's main process is reloaded.

If the specified units are stopped or restarted, then this unit is stopped or restarted as well.

Profile name

The profile's name.

The endpoint name.

The endpoint name.

Shell commands executed after the service's main process has exited.

If the specified units are started at the same time as this unit, delay them until this unit has started.

Name for the device

Start the specified units when this unit is started.

Text of this systemd unit.

Name of the runner to configure

Name of the runner to configure

Shell commands executed before the service's main process is started.

Like ‘requires’, but in addition, if the specified units unexpectedly disappear, this unit will be stopped as well.

Name of the redis server

The name of the cursor theme within the package.

The name of the cursor theme within the package.

The name of the cursor theme within the package.

Keep this unit running as long as the listed units are running

The endpoint name.

The endpoint name.

Automatically start this unit at the given date/time, which must be in the format described in systemd.time(7)

Aliases of that unit.

Shell commands executed as the service's main process.

Database name.

The client name that must be used by the Director when connecting

The director name used by the system administrator

Shell commands executed after the service's main process is started.

Shell commands executed when the service's main process is reloaded.

If the specified units are started at the same time as this unit, delay them until this unit has started.

The name of the Helm chart

Mail "from" name.

The name of this systemd unit, including its extension

Name of the control, as it appears in alsamixer

A system user name for this client instance.

A system user name for this client instance.

The name of the host

The theme name.

Keeps the specified running while this unit is running

The unique agent name.

Keep this unit running as long as the listed units are running

Automatically start this unit at the given date/time, which must be in the format described in systemd.time(7)

Keyboard name.

If the specified units are stopped or restarted, then this unit is stopped or restarted as well.

If the specified units are stopped or restarted, then this unit is stopped or restarted as well.

Each attribute in this set specifies an option in the [Unit] section of the unit

Aliases of that unit.

If the specified units are stopped or restarted, then this unit is stopped or restarted as well.

Database name.

The name of the Helm chart

A list of one or more units that are activated when this unit enters the "inactive" state.

A list of one or more units that are activated when this unit enters the "failed" state.

Agent name, usually same as the hostname

Agent name, usually the same as the hostname.

Akkoma frontend name.

Like ‘requires’, but in addition, if the specified units unexpectedly disappear, this unit will be stopped as well.

Start the specified units when this unit is started.

Start the specified units when this unit is started.

Start the specified units when this unit is started.

The name of the theme within the package.

Arguments passed to the main process script

The name of the service to run

The name of the cask to install.

The name of the formula to install.

The name of the agent as seen in the buildkite dashboard.

The name of the agent as seen in the buildkite dashboard.

Unique identifier of the account

If set to false, this unit will be a symlink to /dev/null

Font name, as used by fontconfig.

Keeps the specified running while this unit is running

Units that want (i.e. depend on) this unit

Units that want (i.e. depend on) this unit

If the specified units are started at the same time as this unit, delay them until this unit has started.

Each attribute in this set specifies an option in the [Unit] section of the unit

The name of the instance.

A list of one or more units that are activated when this unit enters the "failed" state.

A list of one or more units that are activated when this unit enters the "inactive" state.

Mail "reply-to" name.

Name of the redis server

Arguments passed to the main process script

Name is referenced in logs

The cursor name within the package.

The name to return in service discovery responses for the MUC service itself

The endpoint name.

If set to false, this unit will be a symlink to /dev/null

Aliases of that unit.

Aliases of that unit.

If the specified units are stopped or restarted, then this unit is stopped or restarted as well.

If the specified units are stopped or restarted, then this unit is stopped or restarted as well.

Like ‘requires’, but in addition, if the specified units unexpectedly disappear, this unit will be stopped as well.

Units that want (i.e. depend on) this unit

Units that want (i.e. depend on) this unit

Like ‘requires’, but in addition, if the specified units unexpectedly disappear, this unit will be stopped as well.

Like ‘requires’, but in addition, if the specified units unexpectedly disappear, this unit will be stopped as well.

Keep this unit running as long as the listed units are running

Keep this unit running as long as the listed units are running

Start the specified units when this unit is started.

Start the specified units when this unit is started.

Start the specified units when this unit is started, and stop this unit when the specified units are stopped or fail.

Name of the rule.

The unique name for THIS channel in THIS group

Configure unit start rate limiting

Name of the machine when registering it at the central or local api.

Units that want (i.e. depend on) this unit

Units that want (i.e. depend on) this unit

If the specified units are stopped or restarted, then this unit is stopped or restarted as well.

If the specified units are stopped or restarted, then this unit is stopped or restarted as well.

Name is used as a suffix for the service name, user, and group

Start the specified units when this unit is started.

Start the specified units when this unit is started.

ID of the user in initrd.

The endpoint name.

If the specified units are started at the same time as this unit, delay them until this unit has started.

Name of the existing database.

If the specified units are started at the same time as this unit, delay them until this unit has started.

If the specified units are started at the same time as this unit, delay them until this unit has started.

Profile name.

Start the specified units when this unit is started, and stop this unit when the specified units are stopped or fail.

Units that require (i.e. depend on and need to go down with) this unit

A systemd service name to use (without .service suffix).

A systemd service name to use (without .service suffix).

The name of the mailbox.

Configure unit start rate limiting

Name of the user to ensure.

Unique identifier of the account

Keeps the specified running while this unit is running

The name of the service to run

The logical name of the Galera cluster

Units that want (i.e. depend on) this unit

Units that want (i.e. depend on) this unit

The family name of the font within the package.

Command that is executed when this service is started.

The friendly name you give to the network device

The friendly name you give to the network device

Aliases of that unit.

Aliases of that unit.

Aliases of that unit.

Aliases of that unit.

The name of the server

Each attribute in this set specifies an option in the [Unit] section of the unit

Each attribute in this set specifies an option in the [Path] section of the unit

A list of one or more units that are activated when this unit enters the "failed" state.

A list of one or more units that are activated when this unit enters the "inactive" state.

If the specified units are started, then this unit is stopped and vice versa.

Each attribute in this set specifies an option in the [Service] section of the unit

This library's name.

Name of the beat

Name of the wiki.

Name of the server.

Keep this unit running as long as the listed units are running

Keep this unit running as long as the listed units are running

Like ‘requires’, but in addition, if the specified units unexpectedly disappear, this unit will be stopped as well.

Like ‘requires’, but in addition, if the specified units unexpectedly disappear, this unit will be stopped as well.

Units that require (i.e. depend on and need to go down with) this unit

Keep this unit running as long as the listed units are running

Keep this unit running as long as the listed units are running

The preferred method to use when switching from an old to a new version of this service.

Units that want (i.e. depend on) this unit

Units that want (i.e. depend on) this unit

Database name.

Database name.

If the specified units are stopped or restarted, then this unit is stopped or restarted as well.

If the specified units are stopped or restarted, then this unit is stopped or restarted as well.

Name of this iscsi initiator

The endpoint name.

Similar to requires

Start the specified units when this unit is started.

Start the specified units when this unit is started.

If set, a changed unit is restarted by calling systemctl stop in the old configuration, then systemctl start in the new one

The name of this group for this account

Database name.

ID of the group in initrd.

Like ‘requires’, but in addition, if the specified units unexpectedly disappear, this unit will be stopped as well.

Like ‘requires’, but in addition, if the specified units unexpectedly disappear, this unit will be stopped as well.

When clone_target is unspecified, this is the name of a formula repository to tap from GitHub using HTTPS

The database name

Server name to be used for this virtual host

Profile name.

If the specified units are started at the same time as this unit, delay them until this unit has started.

If the specified units are started at the same time as this unit, delay them until this unit has started.

The name of this gateway as shown in firezone

The name of the cookie that the oauth_proxy creates.

If the specified units are started, then this unit is stopped and vice versa.

Name of ICMP pinging job.

Each attribute in this set specifies an option in the [Service] section of the unit

Database name.

The language to use for personal names.

Name of the service.

Units that want (i.e. depend on) this unit

Units that want (i.e. depend on) this unit

Keeps the specified running while this unit is running

The path to the user's shell in initrd.

Group the user belongs to in initrd.

Keeps the specified running while this unit is running

Keeps the specified running while this unit is running

If the specified units are started at the same time as this unit, delay them until this unit has started.

If the specified units are started at the same time as this unit, delay them until this unit has started.

Similar to requires

Whether the service should be restarted during a NixOS configuration switch if its definition has changed.

Database name, only used when the databse is created locally.

If set, a changed unit is restarted by calling systemctl stop in the old configuration, then systemctl start in the new one

Whether to append a minimal default PATH environment variable to the service, containing common system utilities.

If set to false, this unit will be a symlink to /dev/null

If set to false, this unit will be a symlink to /dev/null

This primary server will notify all given secondary servers about zone changes

The user's UID.

Name associated with the build

The name of the watcher

Aliases of that unit.

Aliases of that unit.

Name of the redis server

Each attribute in this set specifies an option in the [Path] section of the unit

Each attribute in this set specifies an option in the [Unit] section of the unit

A list of one or more units that are activated when this unit enters the "failed" state.

A list of one or more units that are activated when this unit enters the "inactive" state.

The name of this authentication provider

The name of an existing user account under which the rsync process should run.

The endpoint name.

Database name.

Database name.

Database name.

Each attribute in this set specifies an option in the [Exec] section of this unit

Each attribute in this set specifies an option in the [Unit] section of the unit

Each attribute in this set specifies an option in the [Unit] section of the unit

A list of one or more units that are activated when this unit enters the "inactive" state.

A list of one or more units that are activated when this unit enters the "failed" state.

A list of one or more units that are activated when this unit enters the "failed" state.

A list of one or more units that are activated when this unit enters the "inactive" state.

Keep this unit running as long as the listed units are running

Keep this unit running as long as the listed units are running

Whether the service should be reloaded during a NixOS configuration switch if its definition has changed

The name of the immich database.

The name of the host in the network as well as the configuration for that host

The advertised name for zeroconf discovery.

Aliases of that unit.

Aliases of that unit.

Whether the service should be restarted during a NixOS configuration switch if its definition has changed.

The name of the plugin.

Database name

Whether to append a minimal default PATH environment variable to the service, containing common system utilities.

The user's primary group.

The name of the database to use for Wakapi.

Like ‘requires’, but in addition, if the specified units unexpectedly disappear, this unit will be stopped as well.

Like ‘requires’, but in addition, if the specified units unexpectedly disappear, this unit will be stopped as well.

Name of the site.

Keep this unit running as long as the listed units are running

Keep this unit running as long as the listed units are running

Database name.

name of the virtualhost

Unique identifier of the contact account

Whether the service should be reloaded during a NixOS configuration switch if its definition has changed

Name of the tmux window;

The name of this actor

The name of this group

Start the specified units when this unit is started, and stop this unit when the specified units are stopped or fail.

Keeps the specified running while this unit is running

If the specified units are started at the same time as this unit, delay them until this unit has started.

If the specified units are started at the same time as this unit, delay them until this unit has started.

Keeps the specified running while this unit is running

An arbitrary list of items such as derivations

The name of this client as shown in firezone

If set to false, this unit will be a symlink to /dev/null

If set to false, this unit will be a symlink to /dev/null

The name of the plugin.

Each attribute in this set specifies an option in the [Slice] section of the unit

Each attribute in this set specifies an option in the [Files] section of this unit

The name of the device.

The name of the device.

The name of an existing user group under which the rsync process should run.

Text of the file

An arbitrary list of items such as derivations

The name identifying the runner instance towards the Gitea/Forgejo instance.

Configure unit start rate limiting

If set to false, this unit will be a symlink to /dev/null

If set to false, this unit will be a symlink to /dev/null

If set to false, this unit will be a symlink to /dev/null

The value full-apivfs (the default) sets up private /dev, /proc, /sys, /tmp and /var/tmp file systems in a separate user name space

Each attribute in this set specifies an option in the [Unit] section of the unit

Each attribute in this set specifies an option in the [Unit] section of the unit

A list of one or more units that are activated when this unit enters the "failed" state.

A list of one or more units that are activated when this unit enters the "inactive" state.

A list of one or more units that are activated when this unit enters the "failed" state.

A list of one or more units that are activated when this unit enters the "inactive" state.

Name of the font to use for regreet.

Keeps the specified running while this unit is running

Keeps the specified running while this unit is running

Database name.

Database name.

Container name, e.g., shopping.

An arbitrary list of items such as derivations

Configure unit start rate limiting

Aliases of that unit.

Aliases of that unit.

Each attribute in this set specifies an option in the [Timer] section of the unit

List of free form strings that can be used to trigger a service reload during Home Manager activation.

Table name.

PostgreSQL database name

The user's home directory.

An arbitrary list of items such as derivations

Name of the GNOME Shell theme.

A list of one or more units that are activated when this unit enters the "failed" state.

A list of one or more units that are activated when this unit enters the "inactive" state.

A list of one or more units that are activated when this unit enters the "failed" state.

A list of one or more units that are activated when this unit enters the "inactive" state.

Each attribute in this set specifies an option in the [Unit] section of the unit

Each attribute in this set specifies an option in the [Unit] section of the unit

Keep this unit running as long as the listed units are running

Keep this unit running as long as the listed units are running

Adapter name that is used in the radicle-ci-broker configuration

The name of this gateway as shown in firezone

Unique identifier of the calendar

The name of this relay group

Database name.

The name of this server.

Name of the Docker context

Units that require (i.e. depend on and need to go down with) this unit

Units that require (i.e. depend on and need to go down with) this unit

Configure unit start rate limiting

Server name.

Start the specified units when this unit is started, and stop this unit when the specified units are stopped or fail.

This is the target address is to match against

Name of the plugin.

Name of the plugin.

Each attribute of this option defines a systemd service that runs hans

User to run the cgit service as.

Name of the local AutoSSH session

Name of the local AutoSSH session

Start the specified units when this unit is started, and stop this unit when the specified units are stopped or fail.

Start the specified units when this unit is started, and stop this unit when the specified units are stopped or fail.

Name of the existing database (has no effect if type is "sqlite").

Each attribute in this set specifies an option in the [Slice] section of the unit

Profile name.

When set to something distinct to null NSD is able to collect statistics per zone

Container name, e.g., shopping.

Environment variables passed to the service's processes.

Configure unit start rate limiting

If set to false, this unit will be a symlink to /dev/null

If set to false, this unit will be a symlink to /dev/null

Whether to enable this .link unit

Name of the theme to use for regreet.

Name of the iSCSI initiator to boot from

Name of the interface.

The group's GID.

Text of the file

If the specified units are started, then this unit is stopped and vice versa.

Configure unit start rate limiting

Configure unit start rate limiting

Keeps the specified running while this unit is running

Keeps the specified running while this unit is running

Description of this unit used in systemd messages and progress indicators.

List of free form strings that can be used to trigger a service restart during Home Manager activation.

Each attribute in this set specifies an option in the [Timer] section of the unit

The user's home directory mode in numeric format

The name of an explicit dtb to be loaded, relative to the dtb base

Bind port for ‹name› endpoint.

Environment variables passed to the service's processes.

A list of one or more units that are activated when this unit enters the "failed" state.

A list of one or more units that are activated when this unit enters the "inactive" state.

A list of one or more units that are activated when this unit enters the "failed" state.

A list of one or more units that are activated when this unit enters the "inactive" state.

Each attribute in this set specifies an option in the [Unit] section of the unit

Each attribute in this set specifies an option in the [Unit] section of the unit

The account UID

If set to false, this unit will be a symlink to /dev/null

If set to false, this unit will be a symlink to /dev/null

The name of services's user

Database name.

Database name.

Database name.

Database name.

Database name.

Database name.

Database name.

Database name.

Description of this unit used in systemd messages and progress indicators.

Name of the interface

If set, a changed unit is never assumed to be socket-activated on configuration switch, even if it might have associated socket units

The name of the plugin.

Text of the file.

Name of the game as it will appear in the game listing.

Bind port for ‹name› endpoint.

Units that require (i.e. depend on and need to go down with) this unit

Units that require (i.e. depend on and need to go down with) this unit

The name of this gateway group

Similar to requires

The name of the dawarich database.

MySQL database name.

Database name for FreshRSS.

Name of directory from which to import ZFS device, this is passed to zpool import as the value of the -d option

Name of the satellite.

The name of this resource

Start the specified units when this unit is started, and stop this unit when the specified units are stopped or fail.

Start the specified units when this unit is started, and stop this unit when the specified units are stopped or fail.

Units that require (i.e. depend on and need to go down with) this unit

Units that require (i.e. depend on and need to go down with) this unit

Port number Go Ethereum will be listening on, both TCP and UDP.

Node name

Extra configuration append to unit

A short human-readable label of the unit.

If set, a changed unit is never assumed to be socket-activated on configuration switch, even if it might have associated socket units

TLS options for virtual host

Name of the beat

Group to run the cgit service as.

Configure unit start rate limiting

Configure unit start rate limiting

If the specified units are started, then this unit is stopped and vice versa.

The user's primary group.

Name of the modifier.

APIs to enable over WebSocket

The title of the boot menu entry.

Each attribute in this set specifies an option in the [Link] section of the unit

If the specified units are started, then this unit is stopped and vice versa.

If the specified units are started, then this unit is stopped and vice versa.

Start the specified units when this unit is started, and stop this unit when the specified units are stopped or fail.

Start the specified units when this unit is started, and stop this unit when the specified units are stopped or fail.

Path to target file relative to HOME.

Whether to enable DHCP on the interfaces matched.

The specified name-string gives the system file name of the storage device managed by this storage daemon

Each attribute in this set specifies an option in the [Network] section of this unit

Each attribute in this set specifies an option in the [Socket] section of the unit

Rename nodes to different name.

If set to false, this unit will be a symlink to /dev/null

If set to false, this unit will be a symlink to /dev/null

Name of the icon theme to use for regreet.

A path which will be scanned for repositories.

Name of the profile.

The account name

Configure unit start rate limiting

Configure unit start rate limiting

What port to listen for client requests, default is 1080.

Enable running shellcheck on the generated scripts for this unit

Each attribute of this option defines a systemd service that runs iodine

Similar to requires

Database name.

Database name.

The program to make available as /bin/sh inside the chroot

Units that require (i.e. depend on and need to go down with) this unit

Units that require (i.e. depend on and need to go down with) this unit

A list of dns servers to be added to the network section of the unit

A list of vrf interfaces to be added to the network section of the unit

A list of ntp servers to be added to the network section of the unit

Format: [AXFR|UDP] <ip-address> <key-name | NOKEY>

The serial port to which your UPS is connected. /dev/ttyS0 is usually the first port on Linux boxes, for example.

ACME options for virtual host.

HTTP options for virtual host

Similar to requires

Similar to requires

Text of the file

Text of the file

Container name, e.g., shopping.

cgit repository settings, see cgitrc(5)

Port number of Go Ethereum HTTP API.

Enable running shellcheck on the generated scripts for this unit

Path to the directory storing the hooks

Path to the directory storing the hooks

Name of this virtual host

Profile name

Whether this file should be generated

If the specified units are started, then this unit is stopped and vice versa.

If the specified units are started, then this unit is stopped and vice versa.

Defines how unit configuration is provided for systemd:

asDropinIfExists creates a unit file when no unit file is provided by the package otherwise it creates a drop-in file named overrides.conf.

asDropin creates a drop-in file named overrides.conf

Start the specified units when this unit is started, and stop this unit when the specified units are stopped or fail.

Start the specified units when this unit is started, and stop this unit when the specified units are stopped or fail.

Database name.

Database name.

The nickname of this Tahoe node.

Whether to enable ‹name›.

Whether to enable ‹name›.

For each item in this list, a ListenStream option in the [Socket] section will be created.

Per-user rules for creation, deletion and cleaning of volatile and temporary files automatically

Units that require (i.e. depend on and need to go down with) this unit

Units that require (i.e. depend on and need to go down with) this unit

A list of bond interfaces to be added to the network section of the unit

A list of vlan interfaces to be added to the network section of the unit

A list of xfrm interfaces to be added to the network section of the unit

Each attribute in this set specifies an option in the [Socket] section of the unit

If set, all the required runtime store paths for this service are bind-mounted into a tmpfs-based chroot(2).

Name of the symlink (relative to /var/lib/rancher/k3s/server/manifests)

The type of the device.

Discourse database name.

Replace any existing runner with the same name

Replace any existing runner with the same name

Whether to enable cgit.

Configure unit start rate limiting

Configure unit start rate limiting

Path of the symlink.

Defines how unit configuration is provided for systemd:

asDropinIfExists creates a unit file when no unit file is provided by the package otherwise it creates a drop-in file named overrides.conf.

asDropin creates a drop-in file named overrides.conf

Whether to enable ‹name›.

VirtualHost to serve cgit on, defaults to the attribute name.

Whether to manage network configuration using systemd-network

This feed account's name.

Path of the source file.

If the specified units are started, then this unit is stopped and vice versa.

If the specified units are started, then this unit is stopped and vice versa.

The group GID

Blockchain garbage collection mode.

Whether to enable hub instance.

Similar to requires

Similar to requires

DNS full-qualified domain name of a database server

DNS full-qualified domain name of a database server

Path to target file relative to xdg.dataHome.

Each attribute in this set specifies an option in the [Match] section of the unit

Name of Google storage bucket

Name of the remote read config, which if specified must be unique among remote read configs

Name of symlink

Whether to enable copying of this file and symlinking it.

Username

SSID to be used in IEEE 802.11 management frames.

Program to execute, possibly with arguments.

The name of the database to create.

Whether to enable Go Ethereum Node.

Additional arguments passed to Go Ethereum.

Name of the model to download and use for speech synthesis

The name of the first admin user.

Proxy account name, without the possibility to include domain name ('at' sign is interpreted literally).

Environment variables available to executed processes.

Drive name without the full path.

The user's home directory mode in numeric format

For each item in this list, a ListenStream option in the [Socket] section will be created.

systemd-boot orders the menu entries by their sort keys, so if you want something to appear after all the NixOS entries, it should start with o or onwards

Units that require (i.e. depend on and need to go down with) this unit

Units that require (i.e. depend on and need to go down with) this unit

A list of vxlan interfaces to be added to the network section of the unit

Each attribute in this set specifies an option in the [Tap] section of the unit

Each attribute in this set specifies an option in the [Tun] section of the unit

Database name.

Override the default TLS port for this virtual host.

Name of the symlink (relative to /var/lib/rancher/rke2/server/manifests)

An arbitrary list of items such as derivations

Unique identifier of the boxxy rule

An arbitrary list of items such as derivations

Similar to requires

Similar to requires

This profile's name.

Whether this file should be generated

Listed primary servers are allowed to notify this secondary server

The user's home directory.

Set the host address for this virtual host

Extra configuration append to unit

Icon to display in file manager, menus, etc.

The name of this client as shown in firezone

Name of the remote write config, which if specified must be unique among remote write configs

Name of the cursor theme to use for regreet.

Whether the target path should be unconditionally replaced by the managed file source

If the specified units are started, then this unit is stopped and vice versa.

If the specified units are started, then this unit is stopped and vice versa.

Whether to enable TLS support.

Name of modem configuration file, will be searched for in config in the spooling area directory.

Name of the user to ensure.

Name of the user to ensure.

Each attribute in this set specifies an option in the [WLAN] section of the unit

Each attribute in this set specifies an option in the [L2TP] section of the unit

Each attribute in this set specifies an option in the [Xfrm] section of the unit

Each attribute in this set specifies an option in the [VLAN] section of the unit

Each attribute in this set specifies an option in the [Bond] section of the unit

Each attribute in this set specifies an option in the [Peer] section of the unit

Whether to include the full closure of the systemd unit file into the chroot, instead of just the dependencies for the executables.

Members of this group can access the control socket for this interface.

The flake reference from is rewritten to.

The flake reference to which from> is to be rewritten.

Configure unit start rate limiting

Local secret key in hexadecimal form.

Name of this overlay

Bind address for ‹name› endpoint.

Interface to use when method is iface.

A list of route sections to be added to the unit

Whether the SSID is to be interpreted using UTF-8 encoding.

The name of the hook

Override the default HTTP port for this virtual host.

A list of URIs referencing documentation for this unit or its configuration.

Database name.

Database name.

Name of database.

An arbitrary list of items such as derivations

Name of symlink

The actual zone data

Path to target file relative to xdg.cacheHome.

Similar to requires

An arbitrary list of items such as derivations

Similar to requires

Text of the file

Set name to shared memory zone.

Name of the plugin linked to $XDG_CONFIG_HOME/ranger/plugins/

Bind address for ‹name› endpoint.

The name of the host in the network as well as the configuration for that host

Name of the PostgreSQL database.

The name of the Linkwarden database.

Whether to manage network configuration using systemd-network

A list of tunnel interfaces to be added to the network section of the unit

A list of bridge interfaces to be added to the network section of the unit

Database name to use when connecting to an external or manually provisioned database; has no effect when a local database is automatically provisioned

Database name.

Each attribute in this set specifies an option in the [VRF] section of the unit

A list of URIs referencing documentation for this unit or its configuration.

An arbitrary list of items such as derivations

An arbitrary list of items such as derivations

An arbitrary list of items such as derivations

An arbitrary list of items such as derivations

Whether to enable DNSSEC.

Backup type as described in: https://pgbackrest.org/command.html#command-backup/category-command/option-type

Local Mattermost database name.

The account UID

Zone file resource records contain columns of data, separated by whitespace, that define the record.

Text of the file.

The name of the Grafana database.

static: Immediately answer any Neighbor Solicitation Messages (if they match the IP rule). iface: Forward the Neighbor Solicitation Message through the specified interface and only respond if a matching Neighbor Advertisement Message is received. auto: Same as iface, but instead of manually specifying the outgoing interface, check for a matching route in /proc/net/ipv6_route.

A list of BridgeFDB sections to be added to the unit

A list of BridgeMDB sections to be added to the unit

Each attribute in this set specifies an option in the [VXLAN] section of the unit

The cgit package to use.

The geth package to use.

Uhub plugin configuration.

Enables nylon as a running service upon activation.

Specify the program to run to talk to this UPS. apcsmart, bestups, and sec are some examples.

Path to target file relative to xdg.stateHome.

A list of domains to pass to the network config.

Name of symlink

Name of the homebridge UI platform

Username used to connect to registry.

Configure unit start rate limiting

Root directory for requests.

Whether the target path should be unconditionally replaced by the managed file source

List of URIs referencing documentation for the unit.

Display name of the radio station.

Name of the MySQL database that holds EPGStation's data.

Name of the beat

Whether to enable Go Ethereum HTTP API.

A list of BridgeVLAN sections to be added to the unit

Whether to make the user account hidden.

Each attribute in this set specifies an option in the [FooOverUDP] section of the unit

Each attribute in this set specifies an option in the [CAN] section of the unit

Each attribute in this set specifies an option in the [PIE] section of the unit

Name used to derive peer unit name.

Verify peer certificate

Verify peer certificate

Description of this unit used in systemd messages and progress indicators.

Output DPI configuration.

A program name specifying a Postfix service/daemon process

Instance name.

Configure unit start rate limiting

Configure unit start rate limiting

Whether this file should be generated

Whether this file should be generated

Name of symlink

Extra configuration append to unit

The user's primary group.

The flake reference to be rewritten.

The flake reference to be rewritten.

Each attribute in this set specifies an option in the [IPoIB] section of the unit

Output resolution.

Output framerate.

The name of the wrapper program

This optional key can be used to request that the service be registered with the mDNSResponder(8)

An arbitrary list of items such as derivations

An arbitrary list of items such as derivations

The device to update.

An arbitrary list of items such as derivations

An arbitrary list of items such as derivations

Specifies the real host name to log into.

Adds index directive.

Alias directory for requests.

Each attribute in this set specifies an option in the [Match] section of the unit

Each attribute in this set specifies an option in the [Link] section of the unit

Each attribute in this set specifies an option in the [LLDP] section of the unit

Each attribute in this set specifies an option in the [CAKE] section of the unit

Name of symlink (relative to /etc)

Directory for the ACME challenge, which is public

Whether to enable this PPP peer.

Port to bind the TTS server to.

User account under which this pool runs.

Remote public key in hexadecimal form.

A list of addresses to be added to the network section of the unit

A list of gateways to be added to the network section of the unit

Output video display controller.

Path to the file which contains the actual base64 encoded key

A list of macvtap interfaces to be added to the network section of the unit

Each attribute in this set specifies an option in the [Tunnel] section of the unit

Each attribute in this set specifies an option in the [Bridge] section of the unit

Each attribute in this set specifies an option in the [Netdev] section of the unit

A list of macvlan interfaces to be added to the network section of the unit

Each attribute in this set specifies an option in the [IPVLAN] section of the unit

Each attribute in this set specifies an option in the [IPVTAP] section of the unit

Adds DirectoryIndex directive

Alias directory for requests

How to name the created archives

The network to connect to

Domain to fetch certificate for (defaults to the entry name).

Levels (minimum value for logged events): 0 = verbose debugging 1 = debugging 2 = informational messages 3 = notification 4 = warning

Description of this unit used in systemd messages and progress indicators.

The domain name to collect stats for.

Master=false means slave server

Addresses who may request zone transfers.

Limit retry time for secondary zones.

Whether to enable this RAUC slot.

Marks the server as a backup server

Adds try_files directive.

Configure unit start rate limiting

Configure unit start rate limiting

An arbitrary list of items such as derivations

An arbitrary list of items such as derivations

An arbitrary list of items such as derivations

An arbitrary list of items such as derivations

Isolate traffic between stations (clients) and prevent them from communicating with each other.

Name of the snippet.

Enables HTTP/3 over QUIC on the UDP port for TLS

A system group name for this client instance.

A system group name for this client instance.

For each item in this list, a ListenDatagram option in the [Socket] section will be created.

Path of the source file or directory

Each attribute in this set specifies an option in the [DHCPv4] section of the unit

Each attribute in this set specifies an option in the [DHCPv6] section of the unit

These lines go to the end of cgitrc verbatim.

Output gamma configuration.

Name of this virtual host

A systemd service name to use (without .service suffix).

A systemd service name to use (without .service suffix).

Environment variables used for this PHP-FPM pool.

Description of this unit used in systemd messages and progress indicators.

Description of this unit used in systemd messages and progress indicators.

Alias of home.pointerCursor.name.

Lines which would be added inside ups.conf for handling this UPS.

Enable logging, default is no logging.

Specifies the MAC addresses to deny if macAcl is set to "deny" or "radius"

Password HMAC-SHA-256 for JSON-RPC connections

The user's home directory

Tunnel type.

Each attribute in this set specifies an option in the [QDisc] section of the unit

Each attribute in this set specifies an option in the [PFIFO] section of the unit

Each attribute in this set specifies an option in the [BFIFO] section of the unit

Location of hardware kiss tnc for this interface.

Vertical scaling factor/pixels.

Horizontal scaling factor/pixels.

Definition of systemd shutdown executables

Path of the symlink.

Configure unit start rate limiting

Configure unit start rate limiting

Path to target file relative to xdg.configHome.

A short human-readable label of the unit.

Pair of roots to synchronise.

Specify the log file name

A system group name for this client instance.

A system group name for this client instance.

Whether the target path should be unconditionally replaced by the managed file source

Whether the target path should be unconditionally replaced by the managed file source

Create the home directory when creating the user.

Path of the source file.

Adds a return directive, for e.g. redirections.

The name of the database to store data in.

Tunnel type.

Text of the file.

Optional PKCS#11 module name.

A short description of the user account, typically the user's full name

An arbitrary list of items such as derivations

An arbitrary list of items such as derivations

An arbitrary list of items such as derivations

An arbitrary list of items such as derivations

Server name to verify the hostname on the returned gRPC certificates

Name of the homebridge

Additional packages or strings with context to add to the closure of the chroot

DNS full-qualified domain name of a database server

Sets up a simple reverse proxy as described by https://httpd.apache.org/docs/2.4/howto/reverse_proxy.html#simple.

Keyset used for tunnel identity.

Group account under which this pool runs.

The group GID

For each item in this list, a ListenDatagram option in the [Socket] section will be created.

Each item in this array specifies an option in the [L2TPSession] section of the unit

Each attribute in this set specifies an option in the [IPv6SendRA] section of the unit

Label for this destination

Specifies the MAC addresses to allow if macAcl is set to "allow" or "radius"

The serial port speed of this interface.

pppd configuration for this peer, see the pppd(8) man page.

Whether to enable copying of this file and symlinking it.

Port number of Go Ethereum metrics service.

Listen address of Go Ethereum HTTP API.

Description of this unit used in systemd messages and progress indicators.

Description of this unit used in systemd messages and progress indicators.

GVPE node name

The database name.

Whether to enable the output.

Output rotate configuration.

When or how often the backup should run

Source directories.

Name of the tun device

Each attribute in this set specifies an option in the [MACVLAN] section of the unit

Each attribute in this set specifies an option in the [Match] section of the unit

The user as which to run bitcoind.

Blockchain sync mode.

Maximum peers to connect to.

Path of the source file or directory

Port number of Go Ethereum Auth RPC API.

Whether to offload computation onto a CUDA compatible GPU.

FQIN of referenced Image when source is a file or directory archive.

Optional PKCS#11 module name.

Keyset used for tunnel identity.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Configure unit start rate limiting

Configure unit start rate limiting

The port on which the tub will listen

The port on which the Web server will listen

The flake input from is rewritten to.

The flake input from is rewritten to.

The flake input to which from> is to be rewritten.

Adds DirectoryIndex directive

Alias directory for requests

Whether this file should be generated

Each attribute in this set specifies an option in the [Bridge] section of the unit

Each attribute in this set specifies an option in the [PFIFOFast] section of the unit

The user's auxiliary groups.

The flake reference from is rewritten to

If set to false, the user account will not be created

Shell commands to run when file has changed between generations

Name shown in the website title and on the front page.

The name of the file or block device that should be used as header for the encrypted device.

This optional key specifies the node to connect(2) or bind(2) to.

The path to repo in local machine

Guaranteed minimum hops for ‹name› tunnels.

The ID of your hook

Configuration for MPD

Domain name

A program name specifying a Postfix service/daemon process

Description of this unit used in systemd messages and progress indicators.

Description of this unit used in systemd messages and progress indicators.

A short human-readable label of the unit.

A short human-readable label of the unit.

A short human-readable label of the unit.

The path to the user's shell

Database name to connect to

Set the log-level

The location of the Drupal files directory.

The packaged Helm chart

The database engine name

Configuration for this host

Override for package "short name", used for generating configuration

Name of the voice model to use

Whether to enable this mount.

Attribute set of NetBird client daemons, by default each one will:

1. be manageable using dedicated tooling:

• netbird-<name> script,
• NetBird - netbird-<name> graphical interface when appropriate (see ui.enable),

2. run as a netbird-<name>.service,
3. listen for incoming remote connections on the port 51820 (openFirewall by default),
4. manage the netbird-<name> wireguard interface,
5. use the /var/lib/netbird-/config.json configuration file,
6. override /var/lib/netbird-/config.json with values from /etc/netbird-/config.d/*.json,
7. (hardened) be locally manageable by netbird-<name> system group,

With following caveats:

• multiple daemons will interfere with each other's DNS resolution of netbird.cloud, but should remain fully operational otherwise

Basic Auth protection for a vhost

Override the default port on which to listen for connections.

Service port

Path to a Containerfile which contains instructions to build the image.

Guaranteed minimum hops for ‹name› tunnels.

Add the necessary actions for a upsmon process to work

Controls how long a valid or invalid entry remains in the cache, in milliseconds.

When to run the job.

Image to pull.

The location of the Drupal site state directory.

This optional key tells launchctl what type of socket to create

Whether to enable automatic mounting.

Name of the class implementing the check

Each attribute in this set specifies an option in the [FlowQueuePIE] section of the unit

Attributes for user's entry in pam_mount.conf.xml

Path to encrypted luks device that contains the user's home directory.

The name of the file (can be a raw device or a partition) that should be used as the decryption key for the encrypted device

Where to mount this dataset.

The specified name-string must be the generic SCSI device name of the autochanger that corresponds to the normal read/write Archive Device specified in the Device resource

The data directory for bitcoind.

Contents of the PAM service file.

cgit configuration, see cgitrc(5)

Configuration of uhub

The group's members.

Optional PKCS#11 module name.

Path to world folder containing the dimension to render

List of servers for inclusion in stub and secondary zones.

The IP interface to bind to. null means "all interfaces".

These lines go to the end of the location verbatim.

These lines go to the end of the location verbatim.

A list of ipv6Prefix sections to be added to the unit

Target node name on the IBM TSM server.

Whether output should be marked as primary

Enable unlocking and mounting of encrypted ZFS home dataset at login.

Name for where mail coming from the remote (far) mail server will end up locally

Location of bitcoind pid file.

Which local IP to bind the UDP socket to.

Description of this unit used in systemd messages and progress indicators.

Description of this unit used in systemd messages and progress indicators.

Root directory for requests.

Output scaling method.

This optional key implies SockFamily is set to "Unix"

Extra configuration to be appended to awstats.${name}.conf.

Sets up a simple reverse proxy as described by https://httpd.apache.org/docs/2.4/howto/reverse_proxy.html#simple.

Dataset name to send snapshots to.

S3 bucket name to use for HTTP-01 based challenges

The group as which to run bitcoind.

The address on which to accept FastCGI requests.

Each attribute of this option defines a systemd service that runs an OpenVPN instance

The name of the Stash Box

Name of a file containing the spiped key

Each attribute in this set specifies an option in the [DHCPServer] section of the unit

Each attribute in this set specifies an option in the [PFIFOHeadDrop] section of the unit

Name that will be shown to the user.

Interface name

The kimai package to use.

The tahoelafs package to use.

Path of the authentication file.

Shell commands to run when file has changed between generations

Name of the PCM card to control (slave).

Name shown in the server list.

Generic name of the application.

Custom skills for Claude Code

Location of the host path to be mounted.

Extra lines to add to the tinc service configuration file

Username used in the machine image

Specifies the number of retries for failed notifies

The flake reference to be rewritten

Specifies the BSSID for this BSS

Text of the file.

Whether to enable Drupal web application.

Extra arguments to pass to the server commandline.

Whether to enable Coqui TTS server.

The set of system-wide known SSH hosts

Whether to enable proxy for this bucket

Each attribute in this set specifies an option in the [Network] section of the unit

Each attribute in this set specifies an option in the [IPv6AcceptRA] section of the unit

The packaged Helm chart

Extra configuration lines to add to THIS channel's configuration.

Whether to create the home directory and ensure ownership as well as permissions to match the user.

Optional slot number of the token that stores the certificate.

Override the default port on which to listen for JSON-RPC connections.

Defines how unit configuration is provided for systemd:

asDropinIfExists creates a unit file when no unit file is provided by the package otherwise it creates a drop-in file named overrides.conf.

asDropin creates a drop-in file named overrides.conf

Defines how unit configuration is provided for systemd:

asDropinIfExists creates a unit file when no unit file is provided by the package otherwise it creates a drop-in file named overrides.conf.

asDropin creates a drop-in file named overrides.conf

Additional systemd dependencies required to succeed before the Setup Key file becomes available.

Additional systemd dependencies required to succeed before the Setup Key file becomes available.

The plugin.

A short human-readable label of the unit.

A short human-readable label of the unit.

The name of the module

Source ZFS dataset

Path of the source file or directory

Path of the source file or directory

Whether the target path should be unconditionally replaced by the managed file source

Interface name

As which user the backup should run.

This optional key can be used to specifically request that "IPv4" or "IPv6" socket(s) be created.

Alias directory for requests.

Adds index directive.

add will additionally listen for TLS connections. only will disable TLS connections. force will redirect non-TLS traffic to the TLS connection.

A list of address sections to be added to the unit

This optional key can be used to request that the service be registered with the mDNSResponder(8)

This optional key specifies the mode of the socket

Custom name of this poller.

Common name attribute of allowed peer certificates

Common name attribute of allowed peer certificates

The user of the file

Path of certificates (*.{crt,cert,key}) used to connect to registry.

Name of the runner group to add this runner to (defaults to the default runner group)

Name of the runner group to add this runner to (defaults to the default runner group)

Name of the class implementing the check

Whether to operate in tun (IP) or tap (Ethernet) mode.

Legacy RSA public key of the host in PEM format, including start and end markers

Limit retry time for secondary zones

Guaranteed minimum hops for ‹name› tunnels.

Output position

When or how often the backup should run

Extra zone config to be appended at the end of the zone section.

Set maximum cache size

Path to file containing local secret key in binary or hexadecimal form.

IP of the Redis master

Whether to ask Let’s Encrypt to sign a certificate for this virtual host

Language of the environment

Path of the authentication file used to connect to registry.

Adds try_files directive.

Optional slot number of the token that stores the certificate.

List of address ranges allowed to query this zone

Name of the user to log in

Custom skills for Codex

The name of the user for this authelia instance.

The name the camera will show up as.

A local file path specifying the location of the mount point.

If set, root doesn't need to authenticate (e.g. for the useradd service).

Guaranteed minimum hops for ‹name› tunnels.

List of virtual hostnames from which to accept requests.

IP address of server running hans

The location for users to install Drupal themes.

Limit refresh time for secondary zones.

Limit on the number of simultaneous connections allowed.

The port on which the SFTP server will listen

Errbot backend name.

Defines how unit configuration is provided for systemd:

asDropinIfExists creates a unit file when no unit file is provided by the package otherwise it creates a drop-in file named overrides.conf.

asDropin creates a drop-in file named overrides.conf

Defines how unit configuration is provided for systemd:

asDropinIfExists creates a unit file when no unit file is provided by the package otherwise it creates a drop-in file named overrides.conf.

asDropin creates a drop-in file named overrides.conf

Whether to enable SFTP service.

Real name

A list of IPv6PREF64Prefix sections to be added to the unit

Name of symlink

Whether to show the message of the day.

Basic Auth password file for a vhost

Absolute path to the certificate to load

Override the default database cache size in MiB.

These lines go to the end of the location verbatim.

The group of the file

The TCP port to accept connections

Location to serve cgit under.

Path of the source file.

Settings for this slot.

Address to which spiped should connect.

The labels to apply to the build.

Specifies a file containing the MAC addresses to deny if macAcl is set to "deny" or "radius"

Whether to enable Go Ethereum prometheus metrics.

RPC user information for JSON-RPC connections.

IP and port to which this redis instance acts as a slave.

The user ID owning the volume inside the container.

Disable running fsck on this filesystem.

Default window size for this interface.

Path to plugin file.

The name of a .desktop file in the directory specified in the 'package' option.

The name of your network of sr.ht-based sites.

Whether to enable the HTTP/3 protocol

If set, the OATH Toolkit will be used.

File or block device to export.

The subnets which this tinc daemon will serve

This optional key can be used to request that the service be registered with the mDNSResponder(8)

PostgreSQL host for operating remotely.

The user as which to run blockbook-frontend-‹name›.

Name that will be shown.

Defines how unit configuration is provided for systemd:

asDropinIfExists creates a unit file when no unit file is provided by the package otherwise it creates a drop-in file named overrides.conf.

asDropin creates a drop-in file named overrides.conf

Defines how unit configuration is provided for systemd:

asDropinIfExists creates a unit file when no unit file is provided by the package otherwise it creates a drop-in file named overrides.conf.

asDropin creates a drop-in file named overrides.conf

Features to enable via dlopen ELF notes

Whether to enable Go Ethereum Auth RPC API.

Filesystem type of Device. (used as -t in mount commands)

Local UDP port.

A list of ipv6RoutePrefix sections to be added to the unit

Whether to enable Enables the axport interface.

Default maximum packet size for this interface.

Order of this location block in relation to the others in the vhost

Order of this location block in relation to the others in the vhost

Owner's name.

Adds a return directive, for e.g. redirections.

The drupal package to use.

Specifies if TLS should be enabled

Specifies if TLS should be enabled

This optional key can be used to request that the service be registered with the mDNSResponder(8)

Key / certificate pairs for the virtual host.

Key policy for zone signing keys

Key policy for key signing keys

Allow the user to do certain things with upsd

The address of the proxy.

Determine whether the mounted path will be accessed in read-only mode.

Run the rsync process with an inhibition lock taken; see systemd-inhibit(1) for a list of possible operations.

Listen for any Neighbor Solicitation messages on this interface, and respond to them according to a set of rules

DDNS server name.

Absolute path to the certificate to load

Station MAC address -based authentication

Options for the Kimai PHP pool

Copy content of the image located at the mountpoint of the volume on first run.

Shell commands executed when the instance is starting.

Name of the heat source.

The name of the group for this authelia instance.

Shell commands to run when file has changed between generations

Shell commands to run when file has changed between generations

How to display the tag when focused.

Whether to enable watching for repo.

Optional url of remote repository

Optional branch in remote repository

Whether to enable Bitcoin daemon.

Specifies a file containing the MAC addresses to allow if macAcl is set to "allow" or "radius"

Address to bind on for UI connections

Environment variables to set for the kernel.

Enable logging to the system logger.

Whether to enable Redis server.

Number of worker instances to run

The path of the web root directory.

Path to the certificate authority certificate.

Optional slot number of the token that stores the certificate.

Output scale configuration

port of the Redis master

Number of simultaneous ‹name› tunnels.

Name of the kernel module that provides the card.

Path to the unix socket file on which to accept FastCGI requests.

Subordinate group ids that user is allowed to use

Subordinate user ids that user is allowed to use

Name to match.

The name of private PKCS #8 key file for this policy to be found in the baseDirectory, or the absolute path to the key file

Authentication algorithm for this key.

Maximum number of items to keep in slow log.

Hostname alias(es).

Username for this DDNS provider.

Defines how unit configuration is provided for systemd:

asDropinIfExists creates a unit file when no unit file is provided by the package otherwise it creates a drop-in file named overrides.conf.

asDropin creates a drop-in file named overrides.conf

Defines how unit configuration is provided for systemd:

asDropinIfExists creates a unit file when no unit file is provided by the package otherwise it creates a drop-in file named overrides.conf.

asDropin creates a drop-in file named overrides.conf

A list of routing policy rules sections to be added to the unit

Each item in this array specifies an option in the [WireGuardPeer] section of the unit

Priority of dlopen ELF notes to include. "required" is minimal, "recommended" includes "required", and "suggested" includes "recommended"

Event type.

If set, the OTPW system will be used (if ~/.otpw exists).

TCP Port to bind on for UI connections

Hex-encoded CKA_ID or handle of the certificate on a token or TPM, respectively

Whether to join this channel on connect.

The external address where the host can be reached

A list of URIs referencing documentation for this unit or its configuration.

Name of consistency check to run.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Number of simultaneous ‹name› tunnels.

The type of the desktop entry.

The user names of the group members, added to the /etc/group file.

Instead of synchronizing just the mailboxes that match the farPattern, use it as a prefix which is not matched against the patterns, and is not affected by mailbox list overrides.

Arguments passed to date to create a timestamp suffix for the archive name.

Packages added to the service's PATH environment variable

Location of blockbook-frontend-‹name› data directory.

The type of this worker

The port where the host can be reached

Name of symlink

Whether to enable this PAM service.

Path or reference to the host key.

Public address for p2p connections from peers (if TCP is used)

Whether to start the build on boot

Whether to pull the image on boot

Determines how multiple values are joined to create the claim value

Print global archive statistics upon completion

Manually specify the hostname

The specified name-string names the type of media supported by this device, for example, DLT7000

The group as which to run blockbook-frontend-‹name›.

Name displayed when sending mails.

A systemd service name to use (without .service suffix).

A systemd service name to use (without .service suffix).

Whether users can log in with passwords defined in /etc/shadow.

Specify the server verbosity level, options: debug, verbose, notice, warning.

The type of log being collected.

Mount point on the container file system.

Turns on or off the router flag for Neighbor Advertisement Messages.

The group ID owning the volume inside the container.

Allow these IPs and TSIG to transfer zones, addr TSIG|NOKEY|BLOCKED address range 192.0.2.0/24, 1.2.3.4&255.255.0.0, 3.0.2.20-3.0.2.40

Count of subordinate user ids

Count of subordinate group ids

The username to store inside the credentials file.

Path to a certificate signing request to apply when fetching the certificate.

This optional key specifies the service on the node to connect(2) or bind(2) to.

Name of the wrapper that is installed into PATH

Text of the file.

Whether to enable helper service.

Page or namespace to restrict

The location of the Drupal config sync directory.

A list of host names and/or IP numbers used for accessing the host's ssh service

(optional) name your peer has for you

(optional) name your peer has for you

User name for RPC connections.

A list of DHCPServerStaticLease sections to be added to the unit

Basic Auth protection for a vhost

Adds DirectoryIndex directive

Alias directory for requests

Program to execute, possibly with arguments.

Kissattach parameters for this interface.

Name of user to run the script under.

Shell commands to run after borg create

Name to display

Path of the source file or directory

Specify the bind mode that the bind is used in

Command and arguments to start the kernel.

TLS Options for the Director in this Configuration.

Bind address to be used for this server.

TLS Options for the Director in this Configuration.

Port the NetBird client listens on.

Port the NetBird client listens on.

DNS server to use as an intermediate relay to the iodined server

Specifies the image the volume is based on when Driver is set to the image.

Automatically allocate subordinate user and group ids for this user

The path to the xkb types file

This optional key specifies whether listen(2) or connect(2) should be called on the created file descriptor

Name of the PCM device to control (slave).

The node name of the device

The node name of the device

Hex-encoded CKA_ID or handle of the certificate on a token or TPM, respectively

Absolute path to the certificate to load

Name of the platform

The user's auxiliary groups.

Name for the filter.

Enable PAM mount (pam_mount) system to mount filesystems on user login.

APIs to enable over WebSocket

Path to the host certificate.

Device identifiers, as shown by keyd(1).

If given, sets the SO_MARK option on the TCP socket.

If given, sets the SO_MARK option on the TCP socket.

Require HTTPS and verification of certificates when contacting registries.

Require HTTPS and verification of certificates when contacting registries.

If set to false, the user account will not be created

A list of URIs referencing documentation for this unit or its configuration.

Name of the network interface managed by this client.

Name of the network interface managed by this client.

Defines how unit configuration is provided for systemd:

asDropinIfExists creates a unit file when no unit file is provided by the package otherwise it creates a drop-in file named overrides.conf.

asDropin creates a drop-in file named overrides.conf

Defines how unit configuration is provided for systemd:

asDropinIfExists creates a unit file when no unit file is provided by the package otherwise it creates a drop-in file named overrides.conf.

asDropin creates a drop-in file named overrides.conf

Each attribute in this set specifies an option in the [FairQueueing] section of the unit

Name of the printer / printer queue

FastCGI parameters to override

Refer to xrandr(1) for the documentation of the transform matrix.

The location for users to install Drupal modules.

I2P nodes that are allowed to connect to this service.

Shell commands executed when the instance is shutting down.

URL where this inbox can be accessed over HTTP.

Host to use for the destination dataset

Domain part of the web interface URL (no web interface for this domain if null)

Extra configuration options to put at the end of this BSS's defintion in the hostapd.conf for the associated interface

Order of this location block in relation to the others in the vhost

These lines go to the end of the location verbatim.

Whether this file locals should be generated

Allow client if common name appears in the list.

Run specified command or script after the tunnel device has been opened.

Port to bind on for p2p connections from peers (both TCP and UDP)

Address to bind on for p2p connections from peers (both TCP and UDP)

The path to the user's shell

This option provides a simple way to serve individual, static files.

Name (relative to the root of the filesystem) of the subvolume where the hash table will be stored.

IMAP4 patterns for which mailboxes on the remote mail server to sync

Each attribute in this set specifies an option in the [BatmanAdvanced] section of the unit

Remote UDP port

Canonical hostname for the server.

Path of the source file.

Canonical hostname for the server.

The URL at which to fetch the feed.

The path to the socket to bind to.

The volume driver to use.

The labels to apply to the volume.

Each attribute in this set specifies an option in the [WireGuard] section of the unit

Listen address of Go Ethereum metrics service.

Options for PHP's php.ini file for this Drupal site.

Whether to enable this proxy cache path entry.

The Flake URI of the NixOS configuration to use for the container

Your yandex.com login name.

NNTP group name for the inbox.

The user of the file

Whether to enable the filesystem mount.

(optional) human-readable name for peer

(optional) human-readable name for peer

A list of URIs referencing documentation for this unit or its configuration.

A list of URIs referencing documentation for this unit or its configuration.

Allow client if organizational unit name appears in the list.

Path to encrypted luks device that contains the user's home directory.

Output DPI configuration.

This setting configures the name of a mailbox for which administrator scripts are configured

Public URL of the API address of the reverse proxy/tls terminator

Options for the Drupal PHP pool

The ax25-tools package to use.

Enable verbose output, default is to not be verbose.

This optional key specifies the node to connect(2) or bind(2) to.

IP Address of a database server

IP Address of a database server

Set size to shared memory zone.

The user's shell

If set, keys listed in ~/.ssh/authorized_keys and ~/.eid/authorized_certificates can be used to log in with the associated PKCS#11 tokens.

This is a rule that the target address is to match against

Attributes for user's entry in pam_mount.conf.xml

Key size in bits

Key size in bits

Disables scan for overlapping BSSs in HT40+/- mode

The address that Anubis listens to

Defines how unit configuration is provided for systemd:

asDropinIfExists creates a unit file when no unit file is provided by the package otherwise it creates a drop-in file named overrides.conf.

asDropin creates a drop-in file named overrides.conf

Defines how unit configuration is provided for systemd:

asDropinIfExists creates a unit file when no unit file is provided by the package otherwise it creates a drop-in file named overrides.conf.

asDropin creates a drop-in file named overrides.conf

Additional command line parameters

Location of the DokuWiki state directory.

Hostname of server running iodined

A list of options for 'restic check'.

Whether to run the rspamd worker.

The path of a device which is mounted for the volume.

Whether to create the volume on boot.

Structural Kimai's local.yaml configuration

Listen address of Go Ethereum Auth RPC API.

Whether to run the check command with the provided checkOpts options.

The PHP package to use for running this PHP-FPM pool.

Name of symlink

Path to the private key to the matching certificate signing request.

List of URIs referencing documentation for the unit.

The account type

Shell commands executed as the service's main process.

Icon to display in file manager, menus, etc.

Attrset to be transformed into YAML for host config

An existing Let’s Encrypt certificate to use for this virtual host

Maps kanidm groups to values for the claim.

Protocol names to hide in summary tables (RE2 syntax),

Database user.

Settings that should be passed to rsync via long options

The bitcoind package to use.

Address to bind on for API connections relied by the reverse proxy/tls terminator.

Port to bind on for API connections relied by the reverse proxy/tls terminator.

Port number of Go Ethereum WebSocket API.

Number of simultaneous ‹name› tunnels.

Output resolution.

Output framerate.

Sets up a simple reverse proxy as described by https://httpd.apache.org/docs/2.4/howto/reverse_proxy.html#simple.

This optional key specifies the protocol to be passed to socket(2)

Each attribute in this set specifies an option in the [TokenBucketFilter] section of the unit

Each attribute in this set specifies an option in the [HeavyHitterFilter] section of the unit

A set of files to be copied to $BOOT

Additional names of virtual hosts served by this virtual host configuration.

User or group to restrict

Path to the directory where the pastes will be saved to

The configuration file path to supply bitcoind.

Hex-encoded CKA_ID or handle of the certificate on a token or TPM, respectively

Name resolution of a backends host name is done at start up, or configuration reload

Name of symlink

Indicates the priority over identical Subnets owned by different nodes

Allow client if URI subject alternative name appears in the list.

Allow client if DNS subject alternative name appears in the list.

The furl for a Tahoe helper node

This optional key tells launchctl what type of socket to create

The filename of the generated settings file

Database name.

Database host address.

Database host port.

Require TLS or TLS-PSK encryption

Require TLS or TLS-PSK encryption

The group of the file

Group running the ACME client.

Whether to enable remove bind.

Path of the source file.

If set, the pam_mysql module will be used to authenticate users against a MySQL/MariaDB database.

Type of this limit

The hostname the web service appears under.

Number of simultaneous ‹name› tunnels.

Key of taint.

A list of URIs referencing documentation for this unit or its configuration.

A list of URIs referencing documentation for this unit or its configuration.

The repo of the Helm chart

Full legal name

Set the logcheck level.

Number of daily snapshots.

Whether to enable this source.

User under which to run the service

The path to the xkb compat file

Shell commands to run when file has changed between generations

Output video display controller.

See torrc manual.

User account under which this instance of redis-server runs.

Denied client IP ranges, these gets evaluated after the allowed IP ranges, defaults to all IPv4 addresses: [ "0.0.0.0/0" ] To block all other access than the allowed.

Item this limit applies to

Number of CPUs to allocate to the machine

Swap size in MB for the machine

Whether to use the testnet instead of mainnet.

Name of group to run the script under

Whether to create the home directory and ensure ownership as well as permissions to match the user.

The hash of the packaged Helm chart

Whether to try to create home directories for users with $HOMEs pointing to nonexistent locations on session login.

This optional key implies SockFamily is set to "Unix"

The prefix length of the subnet

Whether to run 'restic check' with the provided checkOpts options

Enables TCP_NODELAY on the TCP socket.

Whitelists the given rrl-types.

The IP and port to forward all traffic to.

The IP and port to forward all traffic to.

Enables TCP_NODELAY on the TCP socket.

Apache configuration can be done by adapting services.httpd.virtualHosts.

A list of options for 'restic check'

Specifies the frequency band to use, possible values are 2g for 2.4 GHz, 5g for 5 GHz, 6g for 6 GHz and 60g for 60 GHz.

The object to make available inside the initrd.

The server username of this account

Whether the from reference needs to match exactly

Whether the from reference needs to match exactly

Whether the from reference needs to match exactly

User that runs the cronjob.

Paths to SSL files

Whether this node is a relay.

Name of the font to use.

Whether to update /var/log/wtmp.

Start URL of the site.

Whether to enable fedimintd.

Define a launchd job

Whether the luksOpen will be attempted before LVM scan or after it.

Name of the theme to use for the lightdm-gtk-greeter.

Label of the unlocked encrypted device

This optional key specifies the node to connect(2) or bind(2) to.

Path to key file

Whether to enable storage service.

URI to bind the wyoming server to.

Basic Auth password file for a vhost

Whether to enable the QUIC transport protocol

Any additional text to be appended to the wp-config.php configuration file

Packages added to the service's PATH environment variable

The type of the service

Extra configuration values that you want to insert into settings.php

"Options appended to the PHP configuration file php.ini used for this PHP-FPM pool."

If true, the user's shell will be set to users.defaultUserShell.

Limit refresh time for secondary zones

If enabled, the pam_umask module will be loaded.

Shell commands to execute when the event is triggered.

Regex specifying which log lines to ignore.

The external IP address or hostname where the host can be reached.

Put the host-side of the veth-pair into the named bridge

The relationship with upsd

List of URIs referencing documentation for the unit.

List of URIs referencing documentation for the unit.

List of URIs referencing documentation for the unit.

The email address used to authenticate as this account

TTL for dnssec records

The set of packages that should be made available to the user

The set of packages that should be made availabe to the user

To enable SSL, specify path to the name of certificate files without extension

The server name.

The znapzend backup plan to use for the source

A list of URIs referencing documentation for this unit or its configuration.

A list of URIs referencing documentation for this unit or its configuration.

Use a different name as mailbox name

The input type

Log level of the NetBird daemon.

Log level of the NetBird daemon.

Combined stdout and stderr log file for the Colima service.

The znapzend backup plan to use for the source

Output gamma configuration.

The auth adapter type

This optional key specifies the node to connect(2) or bind(2) to.

The nickname of this Tahoe introducer.

Number of ElGamal/AES tags to send.

If set, the calling user's SSH agent is used to authenticate against the configured keys

Extra lines that go into the pool configuration

Each attribute in this set specifies an option in the [QuickFairQueueing] section of the unit

Whether to enable frp.

Akkoma frontend reference.

The tinc_pre package to use.

Change permissions for the socket

The name of the module

Whether the delay after typing a wrong password should be disabled.

INI sections and values to populate the Image Quadlet.

INI sections and values to populate the Build Quadlet.

The schedule in which data is persisted to disk, represented as a list of lists where the first element represent the amount of seconds and the second the number of changes

How to display the tag when unfocused

Change current mode after bind is executed

The path of a PEM encoded TLS private key

The path of a PEM encoded TLS private key

This optional key can be used to specifically request that "IPv4" or "IPv6" socket(s) be created.

The delay time (in microseconds) on failure.

Location of the dokuwiki acl rules

The path to the xkb symbols file

Local name of the IBM TSM server, must not contain space or more than 64 chars.

This optional key tells launchctl what type of socket to create

This optional key specifies the mode of the socket

E-mail address of the server administrator.