The hostname of the MySQL/MariaDB server

Set the host address for this virtual host

Host address to listen on for notifications.

The host name or IP address the server should listen to.

Host to bind webserver.

The host address the db-rest server should listen on.

Host bind IP address.

The host where MPD is listening.

Set the host address for this virtual host

Host where MQTT server is running.

The host address the atuin server should listen on.

Host address.

Set the host to bind on.

The host that immich will listen on.

The host that rustus will connect to.

The host tremor should be listening on

Redis host.

Connect to MQTT broker on HOST.

Mail host address.

The host address which the ollama server HTTP interface listens to.

The host address which the ollama server HTTP interface listens to.

GitLab host name

The host address which the Open-WebUI server HTTP interface listens to.

The hostname or IP address for Send to bind to.

Prefect server host

Host or address this beszel hub listens on.

Mail host address.

Host to bind to.

Tmate server address.

The host name or IP address the server should listen to.

The server host address.

The host which dgraph zero will be run on.

The host address which the LiteLLM server HTTP interface listens to.

For what host this rule should apply.

External host name

Specifies the hostname on which the tabby server HTTP interface listens.

Set the host address for this virtual host

The host that redis will listen on.

For what host this rule should apply.

The host which dgraph alpha will be run on.

DocuSeal host.

Duo API hostname.

IP address the LLaMA C++ server listens on.

Host name or IP address of the SMTP server.

SMTP host used when sending emails to users.

The IMAPS server address.

The SMTPS server address.

Redis server address.

Cachix host to connect to

Host pattern used by this conditional block

The address where MPD is listening for connections.

IP address of the host system

The host address qui listens on.

The host address which the Docling Serve server HTTP interface listens to.

Mail host address.

Host to bind to

Host name advertised on the LAN

Host for the MySQL database.

The host address to bind to (defaults to localhost).

Host to bind OctoPrint to.

The host that surrealdb will connect to.

Address to listen on.

SMTP host used when sending emails to users.

SMTP host used when sending emails to users.

Redis host.

Redis host.

Host of the database

Database host address.

Cachix uri to use.

Cachix URI to use.

Domain on which nginx will serve the bluemap webapp

The hostname of the API.

domain/ip address to listen on

Database host address.

The host to connect to.

The redis host Dawarich will connect to.

The address where MPD is listening for connections.

Redis server address.

A list of host names and/or IP numbers used for accessing the host's ssh service

The database host

Server hostname.

Mail host address.

Database host address.

Database host address.

Database host address.

Path to SSH host key

The hosts config to be merged with the settings

Artalk server listen host

GitLab container registry host name.

Host to listen on.

Database host address.

Listen host for Phylactery

Address to listen on, falls back to 0.0.0.0

Host/IP to bind to for the web server

The host that Linkwarden will listen on.

Defines the IP address by which ChromaDB will be accessible.

Host or address that this Mattermost instance listens on.

PostgreSQL host

Host address the HTTP server listens on

Database host address.

Database host address.

Outbound SMTP host

FQDN for the grocy instance.

Address to bind local redis instance to.

Host of the database (has no effect if type is "sqlite").

The hostname to serve Snipe-IT on.

The PostgreSQL host.

Database host address.

Database host address

The host name or IP address the server should listen to.

The hostname of the build machine.

The hostname of the build machine.

The hostname of the build machine.

Host address.

Remote host where snapshots should be sent. lz4 is expected to be installed on this host.

Database host address.

Host for the Postgres database.

A list of host names and/or IP numbers used for accessing the host's ssh service

Host to connect to.

Hostname hosting the database.

The set of system-wide known SSH hosts

Database host address.

MySQL database host

Database host for FreshRSS.

Database host address.

Database host address.

Put the host-side of the veth-pair into the named bridge

Host of the postgresql server

Hostname to serve fluidd on

Host-specific configuration written to $XDG_CONFIG_HOME/gh/hosts.yml.

Redis server address.

The public host name to serve.

Database host address.

Database host address or unix socket.

Database host address or unix socket.

The interface on which to listen for connections

NixOS can automatically generate SSH host keys

Host address to bind HTTP server to.

The ip address that Stash should bind to.

Hostname of JMAP server

The Redis host.

Hostname or socket-path to connect to.

Address to listen on (use 0.0.0.0 to allow access from any address).

Host for the mpdscribble daemon to search for a mpd daemon on.

Host for the mpdscribble daemon to search for a mpd daemon on.

Specify SSH host keys to import into the initrd

FQDN of the Jitsi Meet instance.

Only applicable to MySQL or Postgres

Database server address

Database host.

The host name or IP address the server should listen to.

Repository host when operating remotely

The host address for Szurubooru to bind to.

Domain name for the website.

The IPv4 address assigned to the host interface. (Not used when hostBridge is set.)

The IPv6 address assigned to the host interface. (Not used when hostBridge is set.)

Database host address.

Database host address.

Database host address

SMTP server hostname.

Specify host key verification action when connecting to a SSH target with unknown/differing host key.

Redis server hostname.

Database host.

Listen address for PdfDing

Connection string for the PostgreSQL database

Bind IP JupyterHub will be listening on

The hostname of the frontend.

Host port binding options

Remote SSH host to synchronize with.

The host that mpdstats will connect to.

The redis host URL

Specifies the platform where the NixOS configuration will run

The name of the host in the network as well as the configuration for that host

Hostname of IMAP server.

Hostname of SMTP server.

The redis host URL

The redis host URL

The redis host URL

The hostname of the cache server. This is used to generate the private key used for signing store paths (.narinfo)

Specifies the platform where the nix-darwin configuration will run

Host of the postgresql server

The Redis host.

Hostname or address of the postgresql server

Database host or socket path.

The database host Invidious should use

Location of the host path to be mounted.

TLS options for virtual host

The redis host URL

The redis host URL

Host port binding options

Database host address.

The Redis host.

Database host address.

Hostname of the SMTP server use for mail delivery.

The hostname to respond to requests for

Host on which the PostgreSQL database runs.

The host address of your smtp server.

Specifies the host key algorithms that the client wants to use in order of preference.

The redis host URL

The redis host URL

The redis host URL

The 32-bit host ID of the machine, formatted as 8 hexadecimal characters

Files that should be concatenated together to form /etc/hosts.

The hostname to use for the nginx virtual host

Hostname or address on which NFS requests will be accepted

ACME options for virtual host.

HTTP options for virtual host

Database host or socket path.

The hostname to serve agorakit on.

The hostname to serve fediwall on.

Hostname to serve mainsail on

MQTT server hostname

Address to listen on.

Location of SMTP email server

Path to the SSH host public key.

Database host address.

Source port of the external interface on host

The fully qualified domain name to bind to

host

Glance bind address

The redis host URL

Address for the Web UI to listen on for incoming connections.

The name of the column in the log table to which the name of the user being authenticated is stored.

URL of instance

Host to use for the database

Proxy host or IP address.

Whether to ask Let’s Encrypt to sign a certificate for this virtual host

Put the host-side of the veth-pair into the named bridge

Hostname or IP of the MySQL/MariaDB server

Normally, BitlBee gets a hostname using getsockname()

The hostname of the repository you're authenticating to.

The database host to connect to.

Host address on which to serve

Path to the SSH host private key.

Package set to use for the host-specific packages of the VM runner

IP address to listen on.

Hostname or address of the postgresql server

The hostname of your system, as visible from the command line and used by local and remote networks when connecting through SSH and Remote Login

Host where MQTT server is running.

Override the default TLS port for this virtual host.

The IPv4 address assigned to the host interface. (Not used when hostBridge is set.)

SFTP repository host

FQDN for the froide-govplan instance.

Definitions of hosts of nodes to collect data from

The IPv6 address assigned to the host interface. (Not used when hostBridge is set.)

The hostname.

Hostname to use for the nginx vhost.

Hostname to use for the nginx vhost

FQDN for the nextcloud instance.

FQDN for the ruTorrent instance.

The host name to bind the nginx virtual host to, if config.services.nextcloud-spreed-signaling.configureNginx is set to true.

Override the default HTTP port for this virtual host.

Host to listen on

The Redis host.

The host Audiobookshelf binds to.

The name of the host in the network as well as the configuration for that host

DNS name for the urls generated in the cgi.

Discourse database hostname. null means “prefer local unix socket connection”.

The hostname to use for the tsnet node.

The hostname use to setup the virtualhost configuration

The hostname or IP address for chatgpt-retrieval-plugin to bind to.

Host ID for identifying/labelling groups of disks

The host to use if the container is in host networking mode

Hostname hosting the database.

Hostname to allow or deny.

Canonical hostname for the server.

Canonical hostname for the server.

Host of the SMTP server used to send reset password.

Hostname of the server

The IP to listen on.

Hostname of the database to connect to

Database host name. localhost is treated specially and inserts systemd dependencies, other hostnames or IP addresses of the local machine do not.

The host port to be mapped.

Host of the postgresql server

Domain of the host to serve davis under

Specifies port number to forward to.

Outgoing SMTP host.

Canonical hostname for the server.

Canonical hostname for the server.

The Meilisearch host.

Interface address for web application to bind to.

The name of the machine

The hostname use to setup the virtualhost configuration

Source port of the external interface on host

The hostname.

Specifies port number to forward to.

Hostname or address of the postgresql server

Host where InfluxDB server is running.

Database host address.

The IMAP server hostname or IP address.

The SMTP server hostname or IP address.

Server name to be used for this virtual host

PostgreSQL host for operating remotely.

The external address where the host can be reached

URL of the host, without https prefix

Elasticsearch host

Hostname for the server.

The port of your smtp server.

Host path.

Listening address of the web server

The IPv4 address of the host.

The address to forward to.

Canonical hostname for the server.

IP or hostname of the InfluxDB instance.

Database host address.

Extra packages to be used with VMware host.

Hostname for the SMTP server

Host to use for the destination dataset

This enables VMware host virtualisation for running VMs.

Description of this worker

Canonical hostname for the server.

The address to forward to.

DNS name or IP address that will be used for the stream directory lookups or possibly the playlist generation if a Host header is not provided.

Address, hostname or Unix socket path of the database server

The address the application should listen on.

Key / certificate pairs for the virtual host.

On which address Keycloak should accept new connections.

Specifies the real host name to log into.

Configuration for this host

List of aliases the site has.

Hostname of IMAP server to connect to.

Hostname of the mumble server to connect to.

Whether to enable VirtualBox.

Additional names of virtual hosts served by this virtual host configuration.

Attrset to be transformed into YAML for host config

Domain name of the instance.

The vmware-workstation package to use.

Legacy RSA public key of the host in PEM format, including start and end markers

Name of the nginx vhost

The hostname.

Add extra config to /etc/vmware/config

The subnets which this tinc daemon will serve

Hostname to use for the nginx vhost

An existing Let’s Encrypt certificate to use for this virtual host

List of packages, that are available to actions, when the runner is configured with a host execution label.

Canonical hostname for the server.

Canonical hostname for the server.

IP address on which nebula lighthouse should serve DNS. 'localhost' is a good default to ensure the service does not listen on public interfaces; use a Nebula address like 10.0.0.5 to make DNS resolution available to nebula hosts only.

The port where the host can be reached

If the Suricata box is a router for the sniffed networks, set it to 'router'

Canonical hostname for the server.

Address to bind the debug server to.

Address to bind the debug server to.

Address to bind the debug server to.

Address to bind the debug server to.

Locally defined maps of hostnames to IP addresses.

Host for the api or remote transport

Address to bind the debug server to.

Address to bind the debug server to.

Canonical hostname for the server.

The external IP address or hostname where the host can be reached.

Hostname to use

Specifies whether sshd(8) should look up the remote host name, and to check that the resolved host name for the remote IP address maps back to the very same IP address

Address to bind the debug server to.

Address to bind the debug server to.

Address to bind the debug server to.

Path to the unbound control socket

Automatically set up a vboxnet0 host-only network interface.

The virtualbox package to use.

Address to bind the debug server to.

Whether to enable Ghostty.

The bind address used by seafile fileserver

The host address that the LDAP server will be bound to.

The host address that the HTTP server will be bound to.

Where to bind the PostgREST web server.

Which port this service should listen on.

The hostname to serve monica on.

PostgreSQL host to connect to

Database host (+port) or socket path

With this option, you can customize an NGINX virtual host which already has sensible defaults for Kanboard

The hostapd package to use.

Host status after agent shutdown.

Manually specify the hostname

Override (NetBIOS) hostname to be used (default hostname).

Canonical hostname for the server.

Enable KVM support for VirtualBox

Hostname for either nginx or httpd.

The subnet of this host

Hostname of the XMPP server to connect to

Directory for the ACME challenge, which is public

Custom themes written to $XDG_CONFIG_HOME/ghostty/themes

Host status after agent startup.

Use VirtualBox installation without GUI and Qt dependency

Access control list for denying incoming SIP registrations and traffic.

Enables HTTP/3 over QUIC on the UDP port for TLS

The host and port Hitch connects to when receiving a connection in the form [HOST]:PORT

Extra configuration for the nginx virtual host of Akkoma

Domain name of this Gemini server, enables checking hostname and port in requests. (multiple occurrences means basic vhosts)

Address to forward connections to (can be HOST:PORT or unix:PATH).

Address and port to listen on (can be HOST:PORT, unix:PATH).

Access control list for incoming SIP traffic.

Access control list for incoming SIP registrations.

Path to certificate private key (PEM with private key)

Path to certificate (PEM with certificate chain)

Expected hostname for WebUI.

Build VirtualBox web service tool (vboxwebsrv) to allow managing VMs via other webpage frontend tools

Allow client if common name appears in the list.

Allow client if organizational unit name appears in the list.

If true, allow all clients, do not check client cert subject.

With this option, you can customize an H2O virtual host which already has sensible defaults for Movim

Hostname to use

Allow client if DNS subject alternative name appears in the list.

Allow client if URI subject alternative name appears in the list.

Enable Mailman on this host

With this option, you can customize an nginx virtual host which already has sensible defaults for radicle-httpd

Hostname of the nginx vhost to configure

Configuration for Ghostty's systemd integration

The ghostty package to use

Whether to enable ghostunnel.

The hostname or ip your gotify endpoint is running.

Package to use for ghostunnel

Path to CA bundle file (PEM/X509)

Whether to add the fonts provided by Ghostscript (such as various URW fonts and the “Base-14” Postscript fonts) to the list of system fonts, making them available to X11 applications.

The hostname to serve LibreNMS on.

List of virtual hostnames from which to accept requests.

An email address for the SOA record at the bit zone

Hostname of the instance.

Your instance's hostname for generating URLs throughout the app

Host name to use for this service.

List of hosts entries to configure in /etc/nsswitch.conf

Whether to enable hostapd, a user space daemon for access point and authentication servers

The hostname to show in the Datadog dashboard (optional)

add will additionally listen for TLS connections. only will disable TLS connections. force will redirect non-TLS traffic to the TLS connection.

The vhost port

Disables scan for overlapping BSSs in HT40+/- mode

Indicates the priority over identical Subnets owned by different nodes

Whether to install the Oracle Extension Pack for VirtualBox.

The ghostunnel package to use.

With this option, you can customize an Nginx virtual host which already has sensible defaults for Movim

Configuration written to $XDG_CONFIG_HOME/ghostty/config

The prefix length of the subnet

The domain name of your instance

Specifies the frequency band to use, possible values are 2g for 2.4 GHz, 5g for 5 GHz, 6g for 6 GHz and 60g for 60 GHz.

If set, does not limit target to localhost, 127.0.0.1, [::1], or UNIX sockets

Enable hardened VirtualBox, which ensures that only the binaries in the system path get access to the devices exposed by the kernel modules instead of all users in the vboxusers group.

The hostname to serve Anuko Time Tracker on.

The hostname to serve Discourse on.

The hostname to serve BookStack on.

Whether to ask Let’s Encrypt to sign a certificate for this virtual host

If enabled, each virtual host gets its own access.log and error.log, namely suffixed by the hostName of the virtual host.

Server mode ghostunnels (TLS listener -> plain TCP/UNIX target)

Path to keystore (combined PEM with cert/key, or PKCS12 keystore)

List consisting of a virtual host name and a list of web applications to deploy on each virtual host

Extra arguments to pass to ghostunnel server

The set of system-wide known SSH hosts

The set of system-wide known SSH hosts

Whether to enable installation of Ghostty configuration syntax for Vim.

The domain name of your instance (eg 'lemmy.ml').

Whether to enable the Ghostty systemd user service.

Enables support for IEEE 802.11ax (WiFi 6, HE)

The address to listen on

Whether to enable installation of Ghostty configuration syntax for bat.

Enables support for IEEE 802.11ac (WiFi 5, VHT)

Database host (+port) or socket path

The domain name under which the server is reachable.

Whether to provide a slurm.conf file

Path to key file

With this option, you can customize an H2O virtual host which already has sensible defaults for Dolibarr

The hostname on which to listen.

The main host that is allowed access.

Address to forward connections to (can be HOST:PORT or unix:PATH).

Address and port to listen on (can be HOST:PORT, unix:PATH).

Path to certificate private key (PEM with private key)

FQDN for the OnlyOffice instance.

Path to certificate (PEM with certificate chain)

Additional TLS/SSL-related configuration options

Hostgroups to declaratively load into FastNetMon Advanced

The host the LDAP is accessible on.

Only listen to incoming requests on specific IP/host

The content of this attribute is appended to any address that is missing a host name

The driver hostapd will use. nl80211 is used with all Linux mac80211 drivers. none is used if building a standalone RADIUS server that does not control any wireless/wired driver

Hostname of the daemon in the icecream infrastructure

This defines a BSS, colloquially known as a WiFi network

Enables support for IEEE 802.11be (WiFi 7, EHT)

Allow client if common name appears in the list.

Require stations (clients) to support WiFi 6 (HE) and disassociate them if they don't.

Enables support for IEEE 802.11n (WiFi 4, HT)

The channel to operate on

Allow client if organizational unit name appears in the list.

Require stations (clients) to support WiFi 4 (HT) and disassociate them if they don't.

Require stations (clients) to support WiFi 5 (VHT) and disassociate them if they don't.

Address of the Docker daemon.

If true, allow all clients, do not check client cert subject.

Allow client if URI subject alternative name appears in the list.

Allow client if DNS subject alternative name appears in the list.

With this option, you can customize an nginx virtual host which already has sensible defaults for Pixelfed

Enable extended host info for this device. Warning: This will heavily increase scrape time.

The public key data for the host

The public key data for the host

The name that will appear in the server list. $g_xonoticversion gets replaced with the current version.

Database hostname.

The hostname served by the XMPP gateway

Whether to ask Let’s Encrypt to sign a certificate for this virtual host

Path to CA bundle file (PEM/X509)

HTTP status used by globalRedirect & forceSSL

Sets the number of seconds that multipath will wait after creating a device with only ghost paths before marking it ready for use in systemd

Kubernetes proxy hostname override.

The IP to listen on

Hostname of a waiting vpicc server vpcd will be connecting to

Whether to clear default keybinds.

SSID to be used in IEEE 802.11 management frames.

Controls the direction in which the ports are mapped:

• "host" means traffic from the host ports is forwarded to the given guest port.
• "guest" means traffic from the guest ports is forwarded to the given host port.

The hostname under which the Ollama UI interface should be accessible

With this option, you can customize an nginx virtual host which already has sensible defaults for Dolibarr

Whether to generate SSH host keys

This is a modular service, which can be imported into a NixOS configuration using the system.services option.

This option allows you to define APs for one or multiple physical radios

The hostname of this ncdns instance, which defaults to the machine hostname

Hostname alias(es).

GitHub hosts to enable the gh git credential helper for

TLS options for virtual host

Extra configuration options to put at the end of global initialization, before defining BSSs

Members of this group can access the control socket for this interface.

The hostname part of the public URL used as base for all frontend requests

Whether the SSID is to be interpreted using UTF-8 encoding.

Only use ipv4, even if the host supports ipv6.

Kubernetes kubelet hostname override.

HTTP options for virtual host

Domain to host Odoo with nginx

Allow requests from a specific host.

The listen host for the HTTP API.

ACME options for virtual host.

The port to host the pbgopy server on.

The hostname the web service appears under.

The content of this attribute is used when building the message-id string for the message

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

If set, does not limit target to localhost, 127.0.0.1, [::1], or UNIX sockets

Host which to proxy requests to if ACME challenge is not found

Whether to enable exporting Gant diagrams as PDF..

Use a weak secret

Disable client authentication, no client certificate will be required.

Database hostname.

This depends on mail_smtpmode

This option customizes the nginx virtual host set up for slskd.

Mail host port.

The public key data for the host

Levels (minimum value for logged events): 0 = verbose debugging 1 = debugging 2 = informational messages 3 = notification 4 = warning

Isolate traffic between stations (clients) and prevent them from communicating with each other.

Which hostname to set the vHost to that is proxying to sks.

Path to keystore (combined PEM with cert/key, or PKCS12 keystore)

Optional hostname to add to /etc/hosts; prevents reverse lookup failures.

Optional hostname to add to /etc/hosts; prevents reverse lookup failures.

Specifies the MAC addresses to deny if macAcl is set to "deny" or "radius"

Hostname alias(es).

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

An attribute set of repositories as described in: https://pgbackrest.org/configuration.html#section-repository

Each repository defaults to set repo-host to the attribute's name

To avoid an additional DNS record and certificate, you may set this option to your primary domain (e.g. "example.com") or use a reverse proxy to handle the HTTP for that domain.

Whether to give the container its own private virtual Ethernet interface

Specifies the MAC addresses to allow if macAcl is set to "allow" or "radius"

The hostname to bind to

If enabled, when NIX_SSL_CERT_FILE is set on the host, pass the CA certificates from the host to the VM.

Extra arguments to pass to ghostunnel server

The static host map defines a set of hosts with fixed IP addresses on the internet (or any network)

Extra configuration for the nginx virtual host of fluidd.

Extra configuration for the nginx virtual host of gancio.

Use this option to customize an nginx virtual host

Mail host port.

Hosts for which git-credential-keepassxc is enabled.

The internet hostname of this mail system

Partition the cache according to origin server or domain

Consult the upstream documentation for more details.

The server host port.

The name of the host

Override the default TLS port for this virtual host.

Extra configuration options to put at the end of this BSS's defintion in the hostapd.conf for the associated interface

A list of host interfaces to bind to for this virtual host.

The path to the public key file for the host

Host and port of the influxdb database.

HE multi user beamformee support

EHT multi user beamformee support

Specifies the BSSID for this BSS

Override the default HTTP port for this virtual host.

All of these scripts will be executed in lexicographical order before hostapd is started, right after the global segment was generated and may dynamically append global options the generated configuration file

FQDN for the Oncall instance.

Sets the environment variable $HELOHOST which is used by the SMTP protocol module to set the parameter given to the HELO command

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Whether to enable Zsh integration

List of hosts to use for relaying outbound mail.

https://www.postfix.org/postconf.5.html#relayhost

HE single user beamformee support

HE single user beamformer support

Country code (ISO/IEC 3166-1)

The hostname the service is reachable via

EHT single user beamformer support

EHT single user beamformee support

When performing a match to select a backend server, SNI host name received from the client is used instead of the request host

Whether to enable Bash integration

Whether to enable Fish integration

Host which to proxy requests to if ACME challenge is not found

Specifies a file containing the MAC addresses to deny if macAcl is set to "deny" or "radius"

Station MAC address -based authentication

Address of the Docker daemon.

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Source (real) IP address of this host.

If non-null, enables an nginx reverse proxy virtual host at this FQDN, at the path configurated with services.slskd.web.url_base.

Name resolution of a backends host name is done at start up, or configuration reload

Specifies a file containing the MAC addresses to allow if macAcl is set to "allow" or "radius"

Host which to proxy requests to if ACME challenge is not found

Hostname shown in peer list and web console.

List of administrators of the current host

A set of NixOS system configurations to be run as lightweight containers

a list of elasticsearch hosts to connect to

TLS options for virtual host

The hosts that the Open Web Calendar permits

Path to certificate file

Host which to proxy requests to if ACME challenge is not found

The path to the public key file for the host

Redis host.

URL of the Loki host.

Whether to configure for the local MPD daemon

The hostname to use when configuring Postfix

Fully-qualified hostname used to identify this host in the IPA domain.

Host which to proxy requests to if ACME challenge is not found

ACME options for virtual host.

HTTP options for virtual host

Static IPv4 -> IPv6 host mappings.

VHT (Very High Throughput) capabilities given as a list of flags

Server name to be used for this virtual host

Mail host port.

Interface to use (IP or name) for inter-host communication

Extra configuration for the nginx virtual host of mainsail.

IP or hostname name of master host.

The hostname of your machine.

By default, H2O, without prejudice, will use as many TLS versions & cipher suites as it & the TLS library (OpenSSL) can support

Required for some non-Amazon implementations.

HT (High Throughput) capabilities given as a list of flags

Whether to set up an nginx virtual host.

The domain name under which to set up the virtual host.

The path, host/port or file descriptior to bind the gunicorn socket to

The path, host/port or file descriptior to bind the gunicorn socket to

Specifies port number to connect on remote host.

Determines the operating channel width for HE.

• "20or40": 20 or 40 MHz operating channel width
• "80": 80 MHz channel width
• "160": 160 MHz channel width
• "80+80": 80+80 MHz channel width

Specify the rules for which files to read on the host

Extra configuration text prepended to ssh_config

Directories from the host filesystem to be included in the sandbox.

The port and interface of the listen endpoint in the form [HOST]:PORT[+CERT].

Directories from the host filesystem to be included in the sandbox.

Determines the operating channel width for VHT.

• "20or40": 20 or 40 MHz operating channel width
• "80": 80 MHz channel width
• "160": 160 MHz channel width
• "80+80": 80+80 MHz channel width

Determines the operating channel width for EHT.

• "20or40": 20 or 40 MHz operating channel width
• "80": 80 MHz channel width
• "160": 160 MHz channel width
• "80+80": 80+80 MHz channel width

The username to log in as on the remote host

Name of this virtual host

Database host port.

Name of this virtual host

Name of this virtual host

LDAP host to connect against.

The username to log in as on the remote host

Environment variables to send from the local host to the server.

The username to log in as on the remote host

List of endpoints to probe.

Whether to enable the self_hosted_relays feature for this account.

IP accessible by other nodes for inter-host communication

Name of this virtual host

The root URL that you want to host Snipe-IT on

Database host port.

Files containing SSH host keys to set as global known hosts. /etc/ssh/ssh_known_hosts (which is generated by programs.ssh.knownHosts) is always included.

Host which to proxy requests to if ACME challenge is not found

When using the SLiRP user networking (default), this option allows to forward ports to/from the host/guest.

Name of the nginx virtual host to use and setup

Override the default TLS port for this virtual host.

Specify per-host settings

location of GhostScript binary

Your instance's hostname

Whether to enable Sunshine, a self-hosted game stream host for Moonlight.

Whether to enable Jitsi BRoadcasting Infrastructure

In containers, whether to use the resolv.conf supplied by the host.

Whether to set up an nginx virtual host.

Whether to enable logging per virtual host.

The domain name under which to set up the virtual host.

Specification of the virtual hosts served by Apache

A list of Nagios object configuration files that must define the hosts, host groups, services and contacts for the network that you want Nagios to monitor.

Enables dynamic resolving of backchannel URLs, including hostname, scheme, port and context path

Mail host port.

Number of seconds that a host is banned.

Name of this virtual host

The host address and port that bosun's web interface will listen on.

Name of this virtual host

Name of this virtual host

Override the default HTTP port for this virtual host.

Database host port.

Name of this virtual host

Database host port.

Key / certificate pairs for the virtual host.

Pass the request Host Header to upstream.

Name of this virtual host

The proxy host to use to connect to the server.

Hostaccess variable to pass to updown script

Address or host the web interface should listen on

A host of an existing Let's Encrypt certificate to use. Note that this option does not create any certificates, nor it does add subdomains to existing ones – you will need to create them manually using security.acme.certs.

Do not run downscript at start if the host is the backup.

If this option is enabled, the guest will be isolated, i.e. it will not be able to contact the host and no guest IP packets will be routed over the host to the outside

Whether to enable Web Services Dynamic Discovery host daemon

If set, all recipients to users at either "localhost" (the literal string) or the canonical host name (from the me control attribute) are remapped to this address

All of these scripts will be executed in lexicographical order before hostapd is started, right after the bss segment was generated and may dynamically append bss options to the generated configuration file

Host on which LCDd is listening.

Redis address - may be a Unix socket or a network host and port.

Database host port.

An attribute set of database instances as described in: https://pgbackrest.org/configuration.html#section-stanza

Each instance defaults to set pg-host to the attribute's name

Fake route that will appear after the real one to any host running a traceroute.

IP address anki-sync-server listens to

The root URL that you want to host monica on

Path or reference to the host key.

database host for postgres only

Domain to use for nginx virtual host.

Check the host IP address in the known_hosts file.

Path to the SSH key to be used by default

Additional names of virtual hosts served by this virtual host configuration.

Host which to proxy requests to if ACME challenge is not found

The domain under which the api is served

The size of the subnet allocated to each host

Set redis host and port.

Host and port of the OpenTSDB database that stores bosun data

Path to the host certificate.

Extra configuration for the nginx virtual host of Jirafeau.

Configure the domain name of this Warpgate instance

Database host port.

This option configures statfs to return the host file system's type rather than V9FS_MAGIC.

The host to listen on.

Database host port.

Whether to enable nginx or not

Packages containing out-of-tree vhost-user drivers.

Hostname under which the target device is reachable.

Enable preemptive failover

Attrset to be transformed into YAML for host config

The IP or host to listen on.

The name of the column in the log table to which the name of the remote host that initiates the session is stored

String to append to every reader name

A list of host interfaces to bind to for this virtual host.

Number of failures before a host gets banned.

Address of the host riemann node

Database host port.

Server name to be used for this virtual host

The (base64-encoded) public host key of this builder

The (base64-encoded) public host key of this builder

The (base64-encoded) public host key of this builder

Disable client authentication, no client certificate will be required.

Database specific connection string for example:

• MySQL/Percona/MariaDB: user:password@tcp(host:3306)/documize
• MySQLv8+: user:password@tcp(host:3306)/documize?allowNativePasswords=true
• PostgreSQL: host=localhost port=5432 dbname=documize user=admin password=secret sslmode=disable
• MSSQL: sqlserver://username:password@localhost:1433?database=Documize or sqlserver://sa@localhost/SQLExpress?database=Documize

Host to listen on.

Additional names of virtual hosts served by this virtual host configuration.

Additional names of virtual hosts served by this virtual host configuration.

Additional names of virtual hosts served by this virtual host configuration.

The fully qualified domain name (FQDN) of this host

The fully qualified domain name (FQDN) of this host

Additional names of virtual hosts served by this virtual host configuration.

Either the fully qualified domain name (FQDN), or just the host name if it does not exists

Host where seyren is accessible.

Database host port.

Allow leaving config.boot.initrd.network.ssh.hostKeys empty, to deploy ssh host keys out of band.

Listen addresses and ports for this virtual host

Enable strict host checking on WebUI.

URL of the influxdb host.

Listen addresses and ports for this virtual host

Listen addresses and ports for this virtual host

Name of the nginx virtual host to use and setup

A list of additional host names and/or IP numbers used for accessing the host's ssh service

A list of additional host names and/or IP numbers used for accessing the host's ssh service

Either the fully qualified domain name (FQDN), or just the host name if it does not exist

Cadvisor listening host

The systemd.socket(5) "ListenStream" used in static-web-server.socket

Listen addresses and ports for this virtual host

Host of the database

Host of the database

Match block conditions used by this block

Host which to proxy requests to if ACME challenge is not found

Which address to bind the seahub server to, of the form:

• HOST
• HOST:PORT
• unix:PATH

Path to host the API on and forward to the daemon's api port

Database host port.

Name of this virtual host

Database host port.

Name of this virtual host

Name of this virtual host

Name of this virtual host

Name of this virtual host

Database host port.

Name of this virtual host

Database host port.

Name of this virtual host

The list of host interfaces from which macvlans will be created

Database host port.

Extra configuration options for the host.

Send empty SSID in beacons and ignore probe request frames that do not specify full SSID, i.e., require stations to know SSID

If set to true, any remote host can connect to and control this BOINC client (subject to password authentication)

Additional names of virtual hosts served by this virtual host configuration.

Additional names of virtual hosts served by this virtual host configuration.

Additional names of virtual hosts served by this virtual host configuration.

Additional names of virtual hosts served by this virtual host configuration.

Additional names of virtual hosts served by this virtual host configuration.

Allows you to host Umami under a subdirectory

Indicates that ssh(1) should hash host names and addresses when they are added to the known hosts file.

Listen addresses and ports for this virtual host

Database host port.

Listen addresses and ports for this virtual host

Listen addresses and ports for this virtual host

Ratio to consider a host as dead.

Host and port combination for the server to listen on.

Listen addresses and ports for this virtual host

Listen addresses and ports for this virtual host

A list of Elasticsearch hosts to push parsed reports to.

Controls Link-Local Multicast Name Resolution support (RFC 4795) on the local host

The root URL that you want to host agorakit on

Host and port of the bosun server that will store the collected data.

Whether an Nginx virtual host should be set up to serve Mobilizon.

Name of this virtual host

Maximum number of concurrent backend connections per host

The hostname of the container.

List of forwarded ports from host to container

"ignoreIP" can be a list of IP addresses, CIDR masks or DNS hosts

Key / certificate pairs for the virtual host.

Cadvisor storage driver host.

Whether to add an entry to /etc/hosts for the configured nextcloud domain to point to localhost and add localhost to nextcloud's trusted_proxies config option

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

Domain to use for the virtual host

Name of this virtual host

Domain to use for the virtual host

Name of this virtual host

Extra SSH configuration options that take precedence over any host specific configuration.

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

Whether to enable nginx or not

Whether to enable nominatim

Atomically update the host OS, container images, portable service images or other sources

Additional names of virtual hosts served by this virtual host configuration.

Database host port.

Name of this virtual host

Host where hatsu should listen for incoming requests.

Whether to enable extra-container, a tool for running declarative NixOS containers without host system rebuilds .

Optional cookie domains to force cookies to (ie: .yourcompany.com)

Database host port.

Whether to enable roundcube

Path to store SSH host & client keys.

Allow localhost redirects

The root URL that you want to host BookStack on

A host of an existing Let's Encrypt certificate to use

A host of an existing Let's Encrypt certificate to use

A host of an existing Let's Encrypt certificate to use

An existing Let’s Encrypt certificate to use for this virtual host

The fully-qualifiled host name of the computer running nullmailer

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

The interface the BitlBee daemon will be listening to

A host of an existing Let's Encrypt certificate to use

This directory is used to download fonts from a remote location, e.g. to host google fonts locally.

Specifies one or more files to use for the user host key database, separated by whitespace

The log format being used

A list of public keys of upstream caches in the format host[-[0-9]*]:public-key

Additional lines of configuration appended to this virtual host in the automatically generated Caddyfile.

Attrset to be transformed into YAML for host config

Whether an nginx virtual host should be set up to serve Discourse

Use a certificate generated by the NixOS ACME module for the given host

Path to UNIX domain socket to listen on

Host where graphite service runs.

Whether to enable Browserpass native messaging host.

Listen addresses and ports for this virtual host.

Listen addresses and ports for this virtual host.

The exact version of Nvidia drivers to use

Whether to enable the browserpass extension host application.

If set, all sae password entries that have a non-wildcard MAC associated to them will additionally be used to populate the MAC allow list

The list of Elasticsearch nodes to connect to

Virtual-host configuration merged with all Sourcehut's virtual-hosts.

Name of this virtual host

A list of additional host names and/or IP numbers used for accessing the host's ssh service

Additional names of virtual hosts served by this virtual host configuration.

Additional names of virtual hosts served by this virtual host configuration.

Additional names of virtual hosts served by this virtual host configuration.

Additional names of virtual hosts served by this virtual host configuration.

Additional names of virtual hosts served by this virtual host configuration.

Additional names of virtual hosts served by this virtual host configuration.

Additional names of virtual hosts served by this virtual host configuration.

A host of an existing Let's Encrypt certificate to use

A host of an existing Let's Encrypt certificate to use

Path to host the API on and forward to the daemon's api port

A host of an existing Let's Encrypt certificate to use

Docker registry host or ip to bind to.

Whether to enable the virtual host

A host of an existing Let's Encrypt certificate to use

A host of an existing Let's Encrypt certificate to use

The address (including host and port) under which we can access the Ollama backend server. !Note that if the the UI service is running under a domain "https://ui.example.org", the Ollama backend service must allow "CORS" requests from this domain, e.g. by adding "services.ollama.environment

A mapping of ports between host and container

Listen addresses and ports for this virtual host

Listen addresses and ports for this virtual host.

Listen addresses and ports for this virtual host

Listen addresses and ports for this virtual host

Listen addresses and ports for this virtual host

Path to host the built-in UI on and forward to the daemon's api port

Listen addresses and ports for this virtual host

Listen addresses and ports for this virtual host

Listen addresses and ports for this virtual host

List containing web application WAR files and/or directories containing web applications and configuration files for the virtual host.

Name of this virtual host

Additional names of virtual hosts served by this virtual host configuration.

Additional names of virtual hosts served by this virtual host configuration.

Host, IPv4 or IPv6 address to listen to.

Whether to enable the Plan 9 file system access to host fonts.

Additional names of virtual hosts served by this virtual host configuration.

Database host port.

Additional virtual host specific configuration

Whether to use nginx or caddy for virtual host management

Whether to set up an nginx virtual host.

The domain name under which to set up the virtual host.

Listen addresses and ports for this virtual host

A key list specifying a host switch combination.

A list of key names is available in https://github.com/htrefil/rkvm/blob/master/switch-keys.md.

If this attribute is given with non-zero length, it will set the password identifier for this entry

Additional names of virtual hosts served by this virtual host configuration.

Additional names of virtual hosts served by this virtual host configuration.

Additional names of virtual hosts served by this virtual host configuration.

Additional names of virtual hosts served by this virtual host configuration.

Performs reverse path filtering (RPF) on IPv6 packets as per RFC 3704

The interfaces the Quassel daemon will be listening to

The protocol specifier for port forwarding between host and container

Use a certificate generated by the NixOS ACME module for the given host

Path to file containing database connection string with credentials

Whether to enable nginx virtual host that will serve the javascript application and act as a proxy for the XMPP server

Sets the password for WPA-PSK

Listen addresses and ports for this virtual host

Listen addresses for this virtual host

Host and port of your graylog2 input

Listen addresses and ports for this virtual host

Listen addresses for this virtual host

Host and port used to connect to a redis instance.

Listen addresses for this virtual host

Override the TLS SNI field value

Additional names of virtual hosts served by this virtual host configuration.

By default pam-u2f module sets the origin to pam://$HOSTNAME

A list of public keys of upstream caches in the format host[-[0-9]*]:public-key

Prepend header to greylisted mails; use %%t for seconds delayed due to greylisting, %%v for the version of postgrey, %%d for the date, and %%h for the host

Whether to enable nginx virtual host management

The host name or IP address on which to bind Subsonic

Listen addresses for this virtual host

The path to the public key file for the host

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

If this attribute is not included, or if is set to the wildcard address (ff:ff:ff:ff:ff:ff), the entry is available for any station (client) to use

Listen addresses and ports for this virtual host

If set, all requests for this host are redirected permanently to the given URL.

If set, all requests for this host are redirected permanently to the given URL.

Database host port.

If this attribute is given, SAE-PK will be enabled for this connection

If this attribute is given, all clients using this entry will get tagged with the given VLAN ID.

Frontend server interface binding specification as either a host:port pair or a unix domain docket

Listen addresses and ports for this virtual host.

The address of the server

URL for the JMAP Session resource

Public IPs for NAT reflection; for connections to loopbackip:sourcePort from the host itself and from other hosts behind NAT

The hosts.hfaxd file entry in the spooling area will be symlinked to the location given here

Listen addresses for this virtual host

A host of an existing Let's Encrypt certificate to use

Listen addresses for this virtual host

Listen addresses for this virtual host

Listen addresses for this virtual host

Listen addresses for this virtual host

Specify the number of cores the guest is permitted to use

Additional names of virtual hosts served by this virtual host configuration.

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

Address on which spiped should listen for incoming connections

A list of domains

A host of an existing Let's Encrypt certificate to use

An existing Let’s Encrypt certificate to use for this virtual host

If set, all requests for this host are redirected permanently to the given URL.

The root URL that you want to host BookStack on

A host of an existing Let's Encrypt certificate to use

A host of an existing Let's Encrypt certificate to use

A host of an existing Let's Encrypt certificate to use

Whether a database should be automatically created on the local host

Listen addresses and ports for this virtual host.

A host of an existing Let's Encrypt certificate to use

Whether to enable nginx or not

A host of an existing Let's Encrypt certificate to use

A host of an existing Let's Encrypt certificate to use

Set macOS user defaults

List of forwarded ports from host to container

Name of this virtual host

Enables InfluxDB on the host system using the services.influxdb2 NixOS module with default options

Whether to enable retiring the host upon OS shutdown .

Listen addresses and ports for this virtual host

Additional names of virtual hosts served by this virtual host configuration.

Additional names of virtual hosts served by this virtual host configuration.

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

A host of an existing Let's Encrypt certificate to use

Create the PostgreSQL database locally

A host of an existing Let's Encrypt certificate to use

A list of files to copy into the chroot from the host system.

A host of an existing Let's Encrypt certificate to use

Listen addresses and ports for this virtual host

The port used when connecting to the database host.

Sets allowed passwords for WPA3-SAE

Additional names of virtual hosts served by this virtual host configuration.

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

Whether to use nginx or caddy for virtual host management

Add a custom host-to-IP mapping.

Whether to use nginx or caddy for virtual host management

Name of the EBICS host.

Add a custom host-to-IP mapping.

Specifies whether to use compression

Contents of the GoToSocial YAML config

A host of an existing Let's Encrypt certificate to use

The host name or IP address on which to bind Airsonic

A host of an existing Let's Encrypt certificate to use

A host of an existing Let's Encrypt certificate to use

Mount the host Nix store as a 9p mount.

Sets the password for WPA-PSK that will be converted to the pre-shared key

Host of an existing Let's Encrypt certificate to use for SSL

The repository to fetch from

Username used by SSH to login to remote host.

A host of an existing Let's Encrypt certificate to use

Enables the LibreSpeed frontend and adds a nginx virtual host if not explicitly disabled and services.librespeed.domain is not null.

Change process root directory to the directory where the config file is located (/etc/tinc/netname/), for added security

Port to use for mbuffer

Whether to enable the GNOME Shell native host connector

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

Sets the password for WPA3-SAE

Whether a PostgreSQL database should be automatically created and configured on the local host

Listen addresses for this virtual host

Listen addresses for this virtual host

If set, all requests for this host are redirected permanently to the given URL.

The password for this entry, read from the given file when starting hostapd

List of target IP ranges, use empty list for any

The network mode or network/s to connect the container to

Set of accepted cipher suites (encryption algorithms) for pairwise keys (unicast packets)

Sets the password(s) for WPA-PSK

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

If set, all requests for this host are redirected permanently to the given URL.

Listen addresses for this virtual host

Listen addresses for this virtual host

Listen addresses for this virtual host

URL of the host

Listen addresses for this virtual host

Listen addresses for this virtual host

Listen addresses for this virtual host

Listen addresses for this virtual host

Whether to enable postfixadmin

Listen addresses for this virtual host

Whether this interface is virtual and should be created by tunctl

Configure nginx for the LibreSpeed frontend

A host of an existing Let's Encrypt certificate to use

Whether to use apache2 or nginx for virtual host management

Selects the authentication mode for this AP.

• "none": Don't configure any authentication

The address (host[:port]) of the IRC server. senpai uses TLS connections by default unless you specify tls option to be false

The password for this entry

Whether a database should be automatically created on the local host

If enabled srun will accept the option "--x11" to allow for X11 forwarding from within an interactive session or a batch job

Whether to enable the GNOME Shell native host connector

Additional names of virtual hosts served by this virtual host configuration.

Listen addresses and ports for this virtual host.

Whether to enable nginx or not

Extra configuration for the caddy virtual host of Misskey

Extra configuration for the nginx virtual host of Misskey

Listen addresses for this virtual host

A host of an existing Let's Encrypt certificate to use

Base URL for the QR code display

A host of an existing Let's Encrypt certificate to use

Which webserver to use for virtual host management.

Listen addresses and ports for this virtual host

Whether to enable native host connector for the GNOME Shell browser extension, a DBus service allowing to install GNOME Shell extensions from a web browser .

Listen addresses and ports for this virtual host.

Name of this virtual host

Path to SSH key used to login to host.

The protocol specifier for port forwarding between host and container

Listen addresses for this virtual host

The path to a file containing the database password

A host of an existing Let's Encrypt certificate to use

Listen addresses for this virtual host

Jitsi Videobridge metrics URL to monitor

Additional names of virtual hosts served by this virtual host configuration.

Listen addresses for this virtual host

Specifies the user under whose account the AuthorizedKeysCommand is run

Additional names of virtual hosts served by this virtual host configuration.

Set the entries to ignore in static /etc/hosts for host completion.

RPC host.

Listen addresses and ports for this virtual host.

If set creates an nginx virtual host for the client

List of protocols sslh will probe for and redirect

A script that will produce a Host Integrity Protection (HIP) report, as described at https://www.infradead.org/openconnect/hip.html

Whether to enable Simple Ollama web UI service; an easy to use web frontend for a Ollama backend service

Listen addresses for this virtual host

If given an IP address, it can be a host name ("localhost"), an IPv4 dotted-quad ("127.0.0.1") or an IPv6 address enclosed in square brackets ("[::1]").

(VCL4.1 and higher) If given an absolute Path ("/path/to/listen.sock") or "@" followed by the name of an abstract socket ("@myvarnishd") accept connections on a Unix domain socket

Network ports to publish from the container to the outer host

Whether a database should be automatically created on the local host

Additional environment file as defined in systemd.exec(5)

With "host", a separate output file is used, based on the hostname of the other endpoint of a connection

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

Listen addresses for this virtual host

Listen addresses for this virtual host

Additional names of virtual hosts served by this virtual host configuration.

Proxy to use to connect to the wstunnel server (USER:PASS@HOST:PORT).

Listen addresses and ports for this virtual host.

Address (<host>:<port>) on which the Prometheus metrics HTTP server should be listening.

If set, all requests for this host are redirected permanently to the given URL.

An IP address or a network IP address with a mask for IPv4 or IPv6

Type of 9p cache to use when mounting host nix store. "none" provides no caching. "loose" enables Linux's local VFS cache. "fscache" uses Linux's fscache subsystem

Listen addresses for this virtual host

Database host port.

A host of an existing Let's Encrypt certificate to use

If set, all requests for this host are redirected permanently to the given URL.

If enabled, the Nix store in the VM is made writable by layering an overlay filesystem on top of the host's Nix store

Create and use a local Meilisearch instance

Path to the private key file on the host system

Whether to enable the GNOME Shell native host connector

Additional names of virtual hosts served by this virtual host configuration.

Additional names of virtual hosts served by this virtual host configuration.

URL of the Loki host.

Listen addresses and ports for this virtual host

Name of this virtual host

A host of an existing Let's Encrypt certificate to use

If set, all requests for this host are redirected permanently to the given URL.

Fully qualified domain name of the JMAP service.

mujmap looks up the JMAP SRV record for this host to determine the JMAP session URL

A host of an existing Let's Encrypt certificate to use

Environment file as defined in systemd.exec(5)

Runs container in ephemeral mode with the empty root filesystem at boot

Whether a database should be automatically created on the local host

A list of remote servers to which to send each message

Database host port.

If set, all requests for this host are redirected permanently to the given URL.

Additional lines of configuration appended to this virtual host in the automatically generated Caddyfile.

A host of an existing Let's Encrypt certificate to use

Whether to give the container its own private UIDs/GIDs space (user namespacing)

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

Listen addresses for this virtual host

The host/domain names that this site can serve.

Listen addresses for this virtual host

Secrets like SECRET_KEY_BASE and BASIC_AUTH_PASSWORD should be passed to the service without adding them to the world-readable Nix store

Additionally enable the recommended set of pairwise ciphers

System databases (as described in /etc/nsswitch.conf on GNU/Linux systems) to copy into the chroot from the host.

Configuration for Static Web Server

Listen addresses for this virtual host

A host of an existing Let's Encrypt certificate to use

A host of an existing Let's Encrypt certificate to use

Whether to enable Native Messaging Host for Plasma Browser Integration.

Listen address as host IP and port definition.

Additional names of virtual hosts served by this virtual host configuration.

Additional names of virtual hosts served by this virtual host configuration.

Listen addresses for this virtual host

Settings to configure backend server

Listen addresses and ports for this virtual host

Whether to enable Rosetta support

List of Systemd services to require and wait for when starting the application service, such as the Matrix homeserver if it's running on the same host.

Specifies the action to be done to / on the guests when the host boots

Listen addresses for this virtual host

A host of an existing Let's Encrypt certificate to use

The qemu package to use. pkgs.qemu can emulate alien architectures (e.g. aarch64 on x86) pkgs.qemu_kvm saves disk space allowing to emulate only host architectures.

Environment file as defined in systemd.exec(5)

Whether to set up and configure an nginx virtual host according to upstream's recommendations

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

Listen addresses for this virtual host

config.yaml configuration as a Nix attribute set

Sets the HTTP Host header on requests sent to the local service.

Environment file as defined in systemd.exec(5)

Source file on the host containing the credential data.

List of resources to host on this listener.

Domain name to request a TLS certificate for.

Environment file as defined in systemd.exec(5)

A host of an existing Let's Encrypt certificate to use

When shutting down / restarting the host what method should be used to gracefully halt the guests

Environment variables to set

Environment file as defined in systemd.exec(5)

The command to execute in case the host shall be suspended

API Key to authenticate with the Moonraker APIs

The URL where the application service is listening for HS requests, from the Matrix HS perspective.# The default value assumes the bridge runs on the same host as the home server, in the same network.

The IP address to connect to the XMPP server on

Whether to enable provisioning functionality in the agent

Listen addresses for this virtual host

Whether to enable seamless mode

A list of paths whose closure should be made available to the VM

Set to true if you host Grafana behind HTTPS.

The content of this attribute is appended to any host name that does not contain a period (except localhost), including defaulthost and idhost

Additional environment file as defined in systemd.exec(5)

Redirect to correct domain if the host header does not match the domain

Specifies the IP address version (IPv4 or IPv6) used to establish a connection between cloudflared and the Cloudflare global network

List of Systemd services to require and wait for when starting the application service, such as the Matrix homeserver if it's running on the same host.

Host/domain name or IP address of the IBM TSM server.

Identify different instances on same host

Additional environment file or files as defined in systemd.exec(5)

Environment file as defined in systemd.exec(5)

Whether the hypervisor should flush the L1 data cache before entering guests

Whether to enable pay-respects' LLM integration

Host name of existing well-known Veilid bootstrap servers for the network to connect to.

List of allowed indicator modules to use for the lightdm gtk greeter panel

EnvironmentFile as defined in systemd.exec(5)

Environment file as defined in systemd.exec(5)

List of resources to host on this listener.

Environment file as defined in systemd.exec(5)

By default, H2O, without prejudice, will use as many TLS versions & cipher suites as it & the TLS library (OpenSSL) can support

By default, H2O, without prejudice, will use as many TLS versions & cipher suites as it & the TLS library (OpenSSL) can support

By default, H2O, without prejudice, will use as many TLS versions & cipher suites as it & the TLS library (OpenSSL) can support

Defines the base domain to create the hostnames for MagicDNS

The IPv6 address assigned to the interface in the container

The IPv4 address assigned to the interface in the container

The IPv6 address assigned to the interface in the container

The location of the output journal

The IPv4 address assigned to the interface in the container

Hostname and port number of an HTTP parent proxy; it should have the form ‘host:port’.

Hostname and port number of an SOCKS parent proxy; it should have the form ‘host:port’.

The name of the node which is used as an identifier when communicating with the remote nodes in the mesh

Remove /etc/hosts entries for "127.0.0.2" and "::1" defined in nixos/modules/config/networking.nix Regionservers must be able to resolve their hostnames to their IP addresses, through PTR records or /etc/hosts entries.

Whether to add cjdns peers with an associated hostname to /etc/hosts

When set to true, attempts to discover the host's public IP via STUN

The IP or hostname which hosts your database.

Table of {hostname: server} pairs to use as authoritative servers for hosts (and subhosts)

A list of components and their hosts that are part of this cluster

When set to true, attempts to discover the host's public IP via STUN

Hostname:port combination for the Sphinx server.

Hostname:port combination to send outgoing mail

User name

Systems with a recently generated hardware-configuration.nix may instead specify only nixpkgs.buildPlatform, or fall back to removing the nixpkgs.hostPlatform line from the generated config

hostname:port to listen for HTTP traffic

hostname:port to listen for HTTP traffic

Systems with a recently generated hardware-configuration.nix do not need to specify this option, unless cross-compiling, in which case you should set only nixpkgs.buildPlatform

Whether to enable Dawarich, a self-hostable alternative to Google Location History.

The list of domain search paths that are considered for resolving hostnames with fewer dots than configured in the ndots option, which defaults to 1 if unset.

The default CA host:port to use.

Listen host:port for HTTP endpoints

Listen host:port for HTTP endpoints

Listen host:port for HTTP endpoints

IP/Port of the Tor SOCKS server

Listening addresses or hostnames.

Authentication endpoint

This public key is an SSH certificate authority, rather than an individual host's key.

This public key is an SSH certificate authority, rather than an individual host's key.

Set the resolver to use for performing recursive DNS queries

Listen host:port for HTTP endpoints

Listen host:port for HTTP endpoints

Listen host:port for HTTP endpoints

Whether to enable Castopod, a hosting platform for podcasters.

The list of hostnames and/or IP addresses from which the Mailman Web UI will accept requests

Token redemption endpoint

Backend server location specified as either a host:port pair or a unix domain docket.

A list of host:port for the Redis servers that are part of a cluster

Whitelist a list of addresses, hostnames, or address blocks.

Set the resolver to use for performing recursive DNS queries

This public key is an SSH certificate authority, rather than an individual host's key.

IP/Port of the Tor SOCKS server for torsocks-faster wrapper suitable for HTTP

Listen host:port for HTTP endpoints

Whether to enable GitHub Actions runner

Whether to enable GitHub Actions runner

Access token validation endpoint

The server address is of the form: [hostname][:port]

The server address is of the form: [hostname][:port]

Whether to enable sourcehut - git hosting, continuous integration, mailing list, ticket tracking, wiki and account management services .

Whether to enable local discovery for the Kubo daemon

The collection of hosted maillists

Additional verbatim entries to be appended to /etc/hosts

Some systems require a /sbin/init script which is started

URL path for the website

Enable Git daemon, which allows public hosting of git repositories without any access controls

IP addresses or hostnames of all nodes in the cluster, including this node

The local hostname, or local network name, is displayed beneath the computer's name at the top of the Sharing preferences pane

The host:port combination or the path to the UNIX socket of a memcached instance

Whether to enable Self-hosted and fully-automated ActivityPub bridge for static sites.

Whether to enable KVMGT (iGVT-g) VGPU support

Whether to enable Self-hosted AI coding assistant using large language models.

The VirtioFS mount tag for the Rosetta runtime, exposed by the host's virtualisation software

The configuration of snips-sh is done through environment variables, therefore you must use upper snake case (e.g. SNIPS_HTTP_INTERNAL)

Hostname of the machine where slurmdbd is running (i.e. name returned by hostname -s).

XFS filesystem hosting the xfs_quota project.

Whether to enable Dashy, a highly customizable, easy to use, privacy-respecting dashboard app

The short hostname of the machine where SLURM control functions are executed (i.e. the name returned by the command "hostname -s", use "tux001" rather than "tux001.my.com").

Hostnames of the XMPP servers to connect to.

Whether to enable Podgrab, a self-hosted podcast manager.

Network hosts that should be probed for remote scanners.

For type pipe or file, the path to the pipe or file

Comma-delimited list of host:port pairs or unix sockets to listen on.

Map of incoming traffic patterns to local targets

Text content of the credential

IPA Server hostname.

Dedicated mail domain used for ephemeral SRS envelope addresses

Build and use a disk image for the Nix store, instead of accessing the host's one through 9p

Whether to enable Pingvin Share, a self-hosted file sharing platform.

DNS hostname where your server can be reached

Hostname of the SMTP server to use to send email.

Whether to set the machine hostname based on the information received from the DHCP server.

List of peers to connect to, in the formats:

• quic://[2001:0db8::1]:9651
• quic://192.0.2.1:9651
• tcp://[2001:0db8::1]:9651
• tcp://192.0.2.1:9651

If addHostedPublicNodes is set to true, the hosted public nodes will also be added.

Hostname of the XMPP server to connect to.

Hostname of the XMPP server to connect to.

Your external IP or hostname.

Whether to enable Syncthing, a self-hosted open-source alternative to Dropbox and Bittorrent Sync.

Whether to enable Syncthing, a self-hosted open-source alternative to Dropbox and Bittorrent Sync. .

Agent name, usually same as the hostname

Agent name, usually the same as the hostname.

Whether to enable basic access authentication for Suwayomi-Server

The hostname or address to listen on or * to listen on all interfaces.

The base-url for a self-hosted bitwarden installation.

Hostname to use for NetBIOS.

Virtual IP identifier shared between CARP hosts.

Adds the hosted peers from https://github.com/threefoldtech/mycelium#hosted-public-nodes.

List of hostname shortnames/IP addresses of the initial monitors.

Set the device preferred hostname

Whether to enable socket activation for Erlang Port Mapper Daemon (epmd), which acts as a name server on all hosts involved in distributed Erlang computations.

Hostname or IP-address to listen to

Whether to enable FreeIPA automatic hostname updates.

The port which the Polaris REST api and web UI should listen to

Whether to enable LubeLogger, a self-hosted, open-source, web-based vehicle maintenance and fuel milage tracker.

Hostname running pbs server.

Whether to generate uuid from fqdn automatically

Whether to enable rmfakecloud remarkable self-hosted cloud.

Whether to auto-update the tap even if it is not hosted on GitHub