Nginx configuration can be done by adapting services.nginx.virtualHosts.<name>

Whether to use nginx or caddy for virtual host management

Whether to enable nominatim

Whether to enable roundcube

Whether to use nginx or caddy for virtual host management

Whether to use nginx or caddy for virtual host management

Whether to use apache2 or nginx for virtual host management

Nginx configuration can be done by adapting services.nginx.virtualHosts.<name>

Whether to enable postfixadmin

The webserver used for the Sympa web interface

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to enable the HTTP/3 protocol

Whether to enable the HTTP/0.9 protocol negotiation used in QUIC interoperability tests

Whether to listen for and reject all HTTPS connections to this vhost

Whether to enable kTLS support

The path of the web root directory.

Whether to enable the QUIC transport protocol

Whether to enable HTTPS in addition to plain HTTP

Whether to enable HTTPS and reject plain HTTP connections

Whether to enable the HTTP/2 protocol

Directory for the ACME challenge, which is public

Whether to add a separate nginx server block that redirects (defaults to 301, configurable with redirectCode) all plain HTTP traffic to HTTPS

Name of this virtual host

A host of an existing Let's Encrypt certificate to use

Basic Auth protection for a vhost

Listen addresses and ports for this virtual host

Enable SSL.

Listen address.

Port number to listen on

Whether to ask Let's Encrypt to sign a certificate for this vhost

Basic Auth password file for a vhost

Makes this vhost the default.

These lines go to the end of the vhost verbatim.

Root directory for requests.

HTTP status used by globalRedirect and forceSSL

Additional names of virtual hosts served by this virtual host configuration.

Adds index directive.

Alias directory for requests.

Host which to proxy requests to if ACME challenge is not found

Declarative location config

Adds try_files directive.

Create an individual listening socket

Adds a return directive, for e.g. redirections.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Basic Auth protection for a vhost

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

Basic Auth password file for a vhost

These lines go to the end of the location verbatim.

Enable PROXY protocol.

Listen addresses for this virtual host

Order of this location block in relation to the others in the vhost

FastCGI parameters to override

Path to server SSL certificate.

Path to server SSL certificate key.

Extra parameters of this listen directive.

name of the virtualhost

Whether to support proxying websocket connections with HTTP/1.1.

Path to root SSL certificate for stapling and client certificates.

Whether to enable HTTPS in addition to plain HTTP

Whether to enable HTTPS and reject plain HTTP connections

Whether to enable nginx virtual host management

Canonical hostname for the server.

Canonical hostname for the server.

Whether to enable HTTP 2

Directory for the acme challenge which is PUBLIC, don't put certs or keys in here

Whether to add a separate nginx server block that permanently redirects (301) all plain HTTP traffic to HTTPS

Path to the key file.

Paths to SSL files

E-mail address of the server administrator.

A host of an existing Let's Encrypt certificate to use

A host of an existing Let's Encrypt certificate to use

Listen addresses and ports for this virtual host.

IP to listen on. 0.0.0.0 for IPv4 only, * for all.

Path to the certificate file.

Whether to enable SSL (https) support.

Log format for Apache's log files

Configuration for HTTP request logging (also known as access logs)

Port to listen on

Path to server SSL certificate key.

This option provides a simple way to serve static directories.

Enable recommended uwsgi settings.

Enable recommended proxy settings.

Whether to ask Let's Encrypt to sign a certificate for this vhost

This option provides a simple way to serve individual, static files.

Domain name

Path to server SSL certificate.

Whether to enable serving ~/public_html as /~«username».

Additional lines of configuration appended to this virtual host in the automatically generated Caddyfile.

List of emails to allow access to this vhost, or null to allow all.

List of groups to allow access to this vhost, or null to allow all.

These lines go to httpd.conf verbatim

Whether to listen for and reject all HTTPS connections to this vhost

Path to server SSL chain file.

Adds DirectoryIndex directive

Alias directory for requests

Whether to enable the virtual host

VirtualHost to serve cgit on, defaults to the attribute name.

The path of Apache's document root directory

Additional virtual host specific configuration

Additional names of virtual hosts served by this virtual host configuration.

Specification of pages to be ignored by web crawlers

Additional names of virtual hosts served by this virtual host configuration.

Sets up a simple reverse proxy as described by https://httpd.apache.org/docs/2.4/howto/reverse_proxy.html#simple.

Declarative location config

Extra SSL configuration options.

If set, all requests for this host are redirected permanently to the given URL.

These lines go to the end of the location verbatim.

Order of this location block in relation to the others in the vhost

A list of host interfaces to bind to for this virtual host.

Listen addresses for this virtual host

List consisting of a virtual host name and a list of web applications to deploy on each virtual host

List of email domains to allow access to this vhost, or null to allow all.

Whether to listen for and reject all HTTPS connections to this vhost

Root directory for requests.

Alias directory for requests.

Adds index directive.

Whether to enable nginx virtual host that will serve the javascript application and act as a proxy for the XMPP server

Adds try_files directive.

Adds a return directive, for e.g. redirections.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Basic Auth protection for a vhost

If you do not enable one of the rpc or httprpc plugins you need to expose an RPC mount through scgi using this option

Basic Auth password file for a vhost

These lines go to the end of the location verbatim.

Order of this location block in relation to the others in the vhost

A list of host names and/or IP numbers used for accessing the host's ssh service

Domain to use for the virtual host

Domain to use for the virtual host

Whether to listen for and reject all HTTPS connections to this vhost

Root directory for requests.

FastCGI parameters to override

Adds index directive.

Alias directory for requests.

The public key data for the host

Adds try_files directive.

Adds a return directive, for e.g. redirections.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Basic Auth protection for a vhost

A list of additional host names and/or IP numbers used for accessing the host's ssh service

Basic Auth password file for a vhost

These lines go to the end of the location verbatim.

The path to the public key file for the host

Whether to support proxying websocket connections with HTTP/1.1.

Order of this location block in relation to the others in the vhost

FastCGI parameters to override

Name of this virtual host

Add a custom host-to-IP mapping.

This public key is an SSH certificate authority, rather than an individual host's key.

Whether to support proxying websocket connections with HTTP/1.1.

A list of host names and/or IP numbers used for accessing the host's ssh service

Whether to listen for and reject all HTTPS connections to this vhost

Whether to listen for and reject all HTTPS connections to this vhost

Whether to listen for and reject all HTTPS connections to this vhost

Whether to listen for and reject all HTTPS connections to this vhost

Enable recommended uwsgi settings.

Enable recommended proxy settings.

Set maximum cache size

Set name to shared memory zone.

Whether to listen for and reject all HTTPS connections to this vhost

Whether to listen for and reject all HTTPS connections to this vhost

Whether to listen for and reject all HTTPS connections to this vhost

Whether to listen for and reject all HTTPS connections to this vhost

Whether to listen for and reject all HTTPS connections to this vhost

Apache configuration can be done by adapting services.httpd.virtualHosts.

Location to serve cgit under.

The public key data for the host

Whether to enable HTTPS in addition to plain HTTP

Whether to enable HTTPS and reject plain HTTP connections

Canonical hostname for the server.

Directory for the acme challenge which is PUBLIC, don't put certs or keys in here

Whether to enable this proxy cache path entry.

Name of the UKI

Whether to enable HTTP 2

A list of additional host names and/or IP numbers used for accessing the host's ssh service

Set size to shared memory zone.

Name of this virtual host

Enable recommended uwsgi settings.

Enable recommended proxy settings.

Nginx first writes files that are destined for the cache to a temporary storage area, and the use_temp_path=off directive instructs Nginx to write them to the same directories where they will be cached

E-mail address of the server administrator.

Host which to proxy requests to if ACME challenge is not found

The levels parameter defines structure of subdirectories in cache: from 1 to 3, each level accepts values 1 or 2

IP to listen on. 0.0.0.0 for IPv4 only, * for all.

Whether to add a separate nginx server block that permanently redirects (301) all plain HTTP traffic to HTTPS

The path to the public key file for the host

Listen addresses and ports for this virtual host.

Whether to enable SSL (https) support.

A host of an existing Let's Encrypt certificate to use

Adds DirectoryIndex directive

Alias directory for requests

Path to host the API on and forward to the daemon's api port

Log format for Apache's log files

Whether to listen for and reject all HTTPS connections to this vhost

Public domain of the API address of the reverse proxy/tls terminator.

Hostnames of the XMPP servers to connect to.

This option provides a simple way to serve individual, static files.

Port to listen on

Path to server SSL certificate key.

This option provides a simple way to serve static directories.

Whether to listen for and reject all HTTPS connections to this vhost

Whether to listen for and reject all HTTPS connections to this vhost

Whether to listen for and reject all HTTPS connections to this vhost

Whether to listen for and reject all HTTPS connections to this vhost

Whether to listen for and reject all HTTPS connections to this vhost

Whether to listen for and reject all HTTPS connections to this vhost

Whether to listen for and reject all HTTPS connections to this vhost

Whether to ask Let's Encrypt to sign a certificate for this vhost

Root directory for requests.

Root directory for requests.

Root directory for requests.

Marks the server as a backup server

Path to server SSL certificate.

Sets up a simple reverse proxy as described by https://httpd.apache.org/docs/2.4/howto/reverse_proxy.html#simple.

Whether to enable serving ~/public_html as /~«username».

Root directory for requests.

These lines go to httpd.conf verbatim

Adds index directive.

Alias directory for requests.

Alias directory for requests.

Alias directory for requests.

Adds index directive.

Adds index directive.

Name of this virtual host

Path to server SSL chain file.

Root directory for requests.

Root directory for requests.

Root directory for requests.

Root directory for requests.

Root directory for requests.

Alias directory for requests.

Adds index directive.

The path of the web root directory.

Whether to listen for and reject all HTTPS connections to this vhost

Whether to configure nginx as a reverse proxy for Invidious

Whether to configure nginx for fedimintd

Overrides to the nginx vhost section for api

Adds try_files directive.

Adds try_files directive.

Adds try_files directive.

These lines go to the end of the location verbatim.

Whether to enable the QUIC transport protocol

Whether to enable kTLS support

Adds try_files directive.

Cached data that has not been accessed for the time specified by the inactive parameter is removed from the cache, regardless of its freshness.

Whether to enable HTTPS in addition to plain HTTP

The name of this nylon instance.

Whether to listen for and reject all HTTPS connections to this vhost

Apache configuration can be done by adapting services.httpd.virtualHosts.

Name of the zone.

Whether to enable HTTPS in addition to plain HTTP

Adds index directive.

Adds index directive.

Alias directory for requests.

Adds index directive.

Alias directory for requests.

Alias directory for requests.

Alias directory for requests.

Adds index directive.

Alias directory for requests.

Adds index directive.

Adds a return directive, for e.g. redirections.

Adds a return directive, for e.g. redirections.

Adds a return directive, for e.g. redirections.

Name of the PPP peer.

Whether to enable HTTPS and reject plain HTTP connections

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Root directory for requests.

Adds a return directive, for e.g. redirections.

Basic Auth protection for a vhost

Basic Auth protection for a vhost

Basic Auth protection for a vhost

Whether to enable HTTPS and reject plain HTTP connections

Canonical hostname for the server.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds try_files directive.

Adds try_files directive.

Adds try_files directive.

Adds try_files directive.

Adds try_files directive.

Order of this location block in relation to the others in the vhost

Directory for the ACME challenge, which is public

Basic Auth protection for a vhost

This public key is an SSH certificate authority, rather than an individual host's key.

Directory for the acme challenge which is PUBLIC, don't put certs or keys in here

Adds DirectoryIndex directive

Alias directory for requests

The path of Apache's document root directory

Whether to enable HTTP 2

Whether to listen for and reject all HTTPS connections to this vhost

Additional names of virtual hosts served by this virtual host configuration.

Specification of pages to be ignored by web crawlers

Alias directory for requests.

Adds index directive.

Path to host the API on and forward to the daemon's api port

Path to host the built-in UI on and forward to the daemon's api port

Whether to enable the HTTP/2 protocol

Adds a return directive, for e.g. redirections.

Adds a return directive, for e.g. redirections.

Adds a return directive, for e.g. redirections.

Adds a return directive, for e.g. redirections.

Adds a return directive, for e.g. redirections.

Root directory for requests.

Defines the address and other parameters of the upstream servers

Alias directory for requests

Adds DirectoryIndex directive

Adds DirectoryIndex directive

Alias directory for requests

E-mail address of the server administrator.

Declarative location config

Adds try_files directive.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Basic Auth protection for a vhost

Basic Auth protection for a vhost

Basic Auth protection for a vhost

Basic Auth protection for a vhost

Basic Auth protection for a vhost

Basic Auth protection for a vhost

These lines go to the end of the upstream verbatim.

IP to listen on. 0.0.0.0 for IPv4 only, * for all.

Whether to add a separate nginx server block that permanently redirects (301) all plain HTTP traffic to HTTPS

Whether to add a separate nginx server block that redirects (defaults to 301, configurable with redirectCode) all plain HTTP traffic to HTTPS

Sets up a simple reverse proxy as described by https://httpd.apache.org/docs/2.4/howto/reverse_proxy.html#simple.

Enable SSL.

Basic Auth password file for a vhost

Basic Auth password file for a vhost

Basic Auth password file for a vhost

Host which to proxy requests to if ACME challenge is not found

Listen addresses and ports for this virtual host.

Adds a return directive, for e.g. redirections.

Whether to enable SSL (https) support.

This option provides a simple way to serve individual, static files.

Listen addresses and ports for this virtual host

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

These lines go to the end of the location verbatim.

These lines go to the end of the location verbatim.

These lines go to the end of the location verbatim.

A host of an existing Let's Encrypt certificate to use

Basic Auth password file for a vhost

Log format for Apache's log files

A host of an existing Let's Encrypt certificate to use

Adds index directive.

Alias directory for requests.

Basic Auth protection for a vhost

The name of the user account

Root directory for requests.

Root directory for requests.

Root directory for requests.

Root directory for requests.

Root directory for requests.

Root directory for requests.

Root directory for requests.

Listen address.

Port to listen on

These lines go to the end of the location verbatim.

Etcd unique node name.

Path to server SSL certificate key.

Sets up a simple reverse proxy as described by https://httpd.apache.org/docs/2.4/howto/reverse_proxy.html#simple.

Sets up a simple reverse proxy as described by https://httpd.apache.org/docs/2.4/howto/reverse_proxy.html#simple.

Adds DirectoryIndex directive

Alias directory for requests

If set, all requests for this host are redirected permanently to the given URL.

This option provides a simple way to serve static directories.

Makes this vhost the default.

Port number to listen on

Adds try_files directive.

Whether to ask Let's Encrypt to sign a certificate for this vhost

Whether to ask Let's Encrypt to sign a certificate for this vhost

Path to server SSL certificate.

Whether to enable serving ~/public_html as /~«username».

Basic Auth password file for a vhost

Basic Auth password file for a vhost

Basic Auth password file for a vhost

Basic Auth password file for a vhost

Basic Auth password file for a vhost

Basic Auth password file for a vhost

These lines go to the end of the location verbatim.

Adds index directive.

Alias directory for requests.

Alias directory for requests.

Alias directory for requests.

Adds index directive.

Adds index directive.

Alias directory for requests.

Adds index directive.

Alias directory for requests.

Adds index directive.

Adds index directive.

Adds index directive.

Alias directory for requests.

Alias directory for requests.

These lines go to the end of the location verbatim.

These lines go to the end of the location verbatim.

These lines go to the end of the vhost verbatim.

These lines go to the end of the location verbatim.

These lines go to the end of the location verbatim.

These lines go to the end of the location verbatim.

Adds a return directive, for e.g. redirections.

Basic Auth password file for a vhost

These lines go to the end of the location verbatim.

These lines go to httpd.conf verbatim

Sets up a simple reverse proxy as described by https://httpd.apache.org/docs/2.4/howto/reverse_proxy.html#simple.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Order of this location block in relation to the others in the vhost

Order of this location block in relation to the others in the vhost

Order of this location block in relation to the others in the vhost

Basic Auth protection for a vhost

Path to server SSL chain file.

Adds try_files directive.

Adds try_files directive.

Adds try_files directive.

Root directory for requests.

Adds try_files directive.

Adds try_files directive.

Adds try_files directive.

Adds try_files directive.

Order of this location block in relation to the others in the vhost

Name i2pd appears in UPnP forwardings list.

Order of this location block in relation to the others in the vhost

These lines go to the end of the location verbatim.

These lines go to the end of the location verbatim.

Root directory for requests.

Adds a return directive, for e.g. redirections.

Adds a return directive, for e.g. redirections.

Adds a return directive, for e.g. redirections.

Adds a return directive, for e.g. redirections.

Adds a return directive, for e.g. redirections.

Adds a return directive, for e.g. redirections.

Adds a return directive, for e.g. redirections.

Listen addresses for this virtual host

Name for the device

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Order of this location block in relation to the others in the vhost

Adds index directive.

Alias directory for requests.

Order of this location block in relation to the others in the vhost

Basic Auth protection for a vhost

Basic Auth protection for a vhost

Basic Auth protection for a vhost

Basic Auth protection for a vhost

Order of this location block in relation to the others in the vhost

Order of this location block in relation to the others in the vhost

Basic Auth protection for a vhost

Order of this location block in relation to the others in the vhost

Basic Auth protection for a vhost

Order of this location block in relation to the others in the vhost

Basic Auth protection for a vhost

Basic Auth password file for a vhost

FastCGI parameters to override

FastCGI parameters to override

FastCGI parameters to override

The endpoint name.

Adds try_files directive.

Alias directory for requests.

Adds index directive.

These lines go to the end of the location verbatim.

These lines go to the end of the location verbatim.

The endpoint name.

The endpoint name.

Host which to proxy requests to if ACME challenge is not found

FastCGI parameters to override

The name of the group

Root directory for requests.

Order of this location block in relation to the others in the vhost

Order of this location block in relation to the others in the vhost

The endpoint name.

The path of Apache's document root directory

Specification of pages to be ignored by web crawlers

Additional names of virtual hosts served by this virtual host configuration.

FastCGI parameters to override

Adds try_files directive.

Adds a return directive, for e.g. redirections.

Additional names of virtual hosts served by this virtual host configuration.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Declarative location config

Basic Auth protection for a vhost

Basic Auth password file for a vhost

Basic Auth password file for a vhost

Basic Auth password file for a vhost

Basic Auth password file for a vhost

Basic Auth password file for a vhost

Basic Auth password file for a vhost

Basic Auth password file for a vhost

FastCGI parameters to override

FastCGI parameters to override

FastCGI parameters to override

FastCGI parameters to override

FastCGI parameters to override

The name of this systemd unit, including its extension

Declarative location config

Alias directory for requests.

Adds index directive.

HTTP status used by globalRedirect and forceSSL

Adds a return directive, for e.g. redirections.

These lines go to the end of the location verbatim.

These lines go to the end of the location verbatim.

These lines go to the end of the location verbatim.

These lines go to the end of the location verbatim.

These lines go to the end of the location verbatim.

These lines go to the end of the location verbatim.

These lines go to the end of the location verbatim.

Adds DirectoryIndex directive

Alias directory for requests

Order of this location block in relation to the others in the vhost

Username for JSON-RPC connections.

The endpoint name.

The endpoint name.

Create an individual listening socket

Name of the redis server

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Order of this location block in relation to the others in the vhost

The name of this systemd unit, including its extension

Basic Auth protection for a vhost

The name of the device to add the address to.

Name of the PAM service.

Adds try_files directive.

Each address may be tagged with a label string

The name of the system used in the system.build.toplevel derivation

Mail "from" name.

If set, all requests for this host are redirected permanently to the given URL.

Sets up a simple reverse proxy as described by https://httpd.apache.org/docs/2.4/howto/reverse_proxy.html#simple.

Adds a return directive, for e.g. redirections.

Basic Auth password file for a vhost

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

If set, all requests for this host are redirected (defaults to 301, configurable with redirectCode) to the given hostname.

These lines go to the end of the location verbatim.

Order of this location block in relation to the others in the vhost

Order of this location block in relation to the others in the vhost

Order of this location block in relation to the others in the vhost

Order of this location block in relation to the others in the vhost

Order of this location block in relation to the others in the vhost

Order of this location block in relation to the others in the vhost

Order of this location block in relation to the others in the vhost

Basic Auth protection for a vhost

FastCGI parameters to override

Basic Auth password file for a vhost

Alias directory for requests

Adds DirectoryIndex directive

Name of the worker

Whether to listen for and reject all HTTPS connections to this vhost

Specifies the Name of the Storage daemon.

Adds DirectoryIndex directive

Alias directory for requests

The name of the user account

These lines go to the end of the location verbatim.

The set of system-wide known SSH hosts

Declarative vhost config

Whether to support proxying websocket connections with HTTP/1.1.

These lines go to the end of the location verbatim.

Name of modem device, will be searched for in /dev.

Listen addresses for this virtual host

The name of the node which is used as an identifier when communicating with the remote nodes in the mesh

Sets up a simple reverse proxy as described by https://httpd.apache.org/docs/2.4/howto/reverse_proxy.html#simple.

Order of this location block in relation to the others in the vhost

Basic Auth password file for a vhost

The broadcast address on the interface.

FastCGI parameters to override

FastCGI parameters to override

FastCGI parameters to override

FastCGI parameters to override

FastCGI parameters to override

FastCGI parameters to override

FastCGI parameters to override

Primary name for use (as a suffix) in:

• systemd service name,
• hardened user name and group,
• systemd *Directory= names,
• desktop application identification,

Primary name for use (as a suffix) in:

• systemd service name,
• hardened user name and group,
• systemd *Directory= names,
• desktop application identification,

Sets up a simple reverse proxy as described by https://httpd.apache.org/docs/2.4/howto/reverse_proxy.html#simple.

The client name that must be used by the Director when connecting

Enable PROXY protocol.

These lines go to the end of the location verbatim.

Whether to support proxying websocket connections with HTTP/1.1.

Whether to support proxying websocket connections with HTTP/1.1.

Whether to support proxying websocket connections with HTTP/1.1.

Order of this location block in relation to the others in the vhost

Mail "reply-to" name.

The director name used by the system administrator

Whether to support proxying websocket connections with HTTP/1.1.

Listen addresses for this virtual host

IP address, optionally with a netmask: IPADDR[/MASK]

Order of this location block in relation to the others in the vhost

The scope of the area where this address is valid.

Database name.

Whether to support proxying websocket connections with HTTP/1.1.

Whether to support proxying websocket connections with HTTP/1.1.

Whether to support proxying websocket connections with HTTP/1.1.

Whether to support proxying websocket connections with HTTP/1.1.

Whether to support proxying websocket connections with HTTP/1.1.

FastCGI parameters to override

The endpoint name.

Name of the nginx virtualhost to use and setup

Order of this location block in relation to the others in the vhost

These lines go to the end of the location verbatim.

Name of this virtual host

Name of this virtual host

Name of this virtual host

The name of the Helm chart

These lines go to the end of the location verbatim.

Name of the redis server

A system user name for this client instance.

A system user name for this client instance.

FastCGI parameters to override

The name of the group

The name of the host

Name of the nginx virtualhost to use and setup

Name of this virtual host

Path to server SSL certificate.

Root directory for requests.

Arbitrary unique number 1..255

Whether to support proxying websocket connections with HTTP/1.1.

Order of this location block in relation to the others in the vhost

Order of this location block in relation to the others in the vhost

Path to server SSL certificate key.

FastCGI parameters to override

Database name.

Adds index directive.

Alias directory for requests.

Agent name, usually same as the hostname

The endpoint name.

Name of the runner to configure

Adds try_files directive.

Font name, as used by fontconfig.

Name of this virtual host

Name of this virtual host

Name of this virtual host

Name of this virtual host

Name of this virtual host

The database name

Adds a return directive, for e.g. redirections.

Extra parameters of this listen directive.

Whether to support proxying websocket connections with HTTP/1.1.

Whether to support proxying websocket connections with HTTP/1.1.

Whether to support proxying websocket connections with HTTP/1.1.

Whether to support proxying websocket connections with HTTP/1.1.

Whether to support proxying websocket connections with HTTP/1.1.

Whether to support proxying websocket connections with HTTP/1.1.

Whether to support proxying websocket connections with HTTP/1.1.

Adds proxy_pass directive and sets recommended proxy headers if recommendedProxySettings is enabled.

Adds uwsgi_pass directive and sets recommended proxy headers if recommendedUwsgiSettings is enabled.

The name of this systemd unit, including its extension

The name of this systemd unit, including its extension

Basic Auth protection for a vhost

The name to return in service discovery responses for the MUC service itself

The name of this systemd unit, including its extension

The name of this systemd unit, including its extension

The name of the service to run

Keyboard name.

Name of the existing database.

Akkoma frontend name.

The endpoint name.

Whether to support proxying websocket connections with HTTP/1.1.

Basic Auth password file for a vhost

Enable recommended uwsgi settings.

Enable recommended proxy settings.

These lines go to the end of the location verbatim.

The name of the Helm chart

Whether to support proxying websocket connections with HTTP/1.1.

The name of an existing user account under which the rsync process should run.

Name of the image

Name of the machine when registering it at the central or local api.

Path to root SSL certificate for stapling and client certificates.

Name of the rule.

Name of the nginx virtualhost to use and setup

Name of the nginx virtual host to use and setup

The domain name under which to set up the virtual host.

Order of this location block in relation to the others in the vhost

The name of the instance.

Whether to support proxying websocket connections with HTTP/1.1.

TLS options for virtual host

Name is referenced in logs

A systemd service name to use (without .service suffix).

A systemd service name to use (without .service suffix).

Database name.

Database name.

The name of this systemd unit, including its extension

The name of this systemd unit, including its extension

The name of the service to run

The name of this gateway as shown in firezone

The name of the cookie that the oauth_proxy creates.

APIs to enable over WebSocket

This primary server will notify all given secondary servers about zone changes

Database name.

Name of the nginx or caddy virtualhost to use and setup

Override the default TLS port for this virtual host.

The name of this systemd unit, including its extension

The name of this systemd unit, including its extension

FastCGI parameters to override

Name of the user to ensure.

Enable recommended proxy settings.

Enable recommended uwsgi settings.

Enable recommended proxy settings.

Enable recommended proxy settings.

Enable recommended uwsgi settings.

Enable recommended uwsgi settings.

Database name, only used when the databse is created locally.

The logical name of the Galera cluster

The name of an existing user group under which the rsync process should run.

Name of this virtual host

Enable recommended uwsgi settings.

Enable recommended proxy settings.

Name of the redis server

Port number of Go Ethereum HTTP API.

User to run the cgit service as.

The name of the agent as seen in the buildkite dashboard.

Server name to be used for this virtual host

Database name

Name of the service.

ACME options for virtual host.

HTTP options for virtual host

The name of the server

Enable recommended uwsgi settings.

Enable recommended uwsgi settings.

Enable recommended uwsgi settings.

Enable recommended proxy settings.

Enable recommended proxy settings.

Enable recommended proxy settings.

Enable recommended proxy settings.

Enable recommended uwsgi settings.

Enable recommended proxy settings.

Enable recommended uwsgi settings.

Override the default HTTP port for this virtual host.

Apache configuration can be done by adapting services.httpd.virtualHosts.<name>

Name is used as a suffix for the service name, user, and group

The endpoint name.

Database name.

Database name.

Database name.

Port number Go Ethereum will be listening on, both TCP and UDP.

Name of this virtual host

Name of this virtual host

Name of this virtual host

Name of this virtual host

Name of this virtual host

Name of this virtual host

Name of this virtual host

Enables HTTP/3 over QUIC on the UDP port for TLS

Name of the beat

Name of the wiki.

Name of the server.

The name of the immich database.

The domain name under which to set up the virtual host.

Configures name servers used to resolve names of upstream servers into addresses

Enable recommended uwsgi settings.

Enable recommended proxy settings.

The name of the database to use for Wakapi.

Name of this iscsi initiator

Set the host address for this virtual host

Name of ICMP pinging job.

When set to something distinct to null NSD is able to collect statistics per zone

The advertised name for zeroconf discovery.

The type of the device.

Directory for the ACME challenge, which is public

Database name.

The actual zone data

Database name.

The name of this client as shown in firezone

Path to the file which contains the actual base64 encoded key

Server name.

Whether to support proxying websocket connections with HTTP/1.1.

Group to run the cgit service as.

The name of this systemd unit, including its extension

The name of this systemd unit, including its extension

The name of this authentication provider

The name of this systemd unit, including its extension

The name of this systemd unit, including its extension

Rename nodes to different name.

Enable recommended proxy settings.

Enable recommended uwsgi settings.

Enable recommended proxy settings.

Enable recommended uwsgi settings.

Enable recommended proxy settings.

Enable recommended uwsgi settings.

Enable recommended proxy settings.

Enable recommended uwsgi settings.

Enable recommended proxy settings.

Enable recommended uwsgi settings.

Enable recommended uwsgi settings.

Enable recommended proxy settings.

Enable recommended uwsgi settings.

Enable recommended proxy settings.

Zone file resource records contain columns of data, separated by whitespace, that define the record.

What port to listen for client requests, default is 1080.

cgit repository settings, see cgitrc(5)

Name of this virtual host

A path which will be scanned for repositories.

Database name.

Database name.

Bind port for ‹name› endpoint.

The name of the host in the network as well as the configuration for that host

PostgreSQL database name

The name of this gateway as shown in firezone

Enable recommended proxy settings.

Enable recommended uwsgi settings.

Name of the caddy/nginx virtualhost to use and setup.

The port on which the tub will listen

The port on which the Web server will listen

This is the target address is to match against

Name of the nginx virtualhost to use and setup

Name of the nginx virtualhost to use and setup

Name of the game as it will appear in the game listing.

Bind port for ‹name› endpoint.

Name of the nginx virtual host to use and setup

Name of the existing database (has no effect if type is "sqlite").

Name of this virtual host

Enable recommended proxy settings.

Enable recommended uwsgi settings.

Adapter name that is used in the radicle-ci-broker configuration

The name of the mailbox.

Database name.

The name of this actor

The name of this group

The type of interface to create

The name of the device.

Whether to enable Go Ethereum HTTP API.

Enable recommended proxy settings.

Enable recommended uwsgi settings.

Whether to enable DNSSEC.

The nickname of this Tahoe node.

Format: [AXFR|UDP] <ip-address> <key-name | NOKEY>

Whether to enable cgit.

Blockchain garbage collection mode.

Whether to enable hub instance.

add will additionally listen for TLS connections. only will disable TLS connections. force will redirect non-TLS traffic to the TLS connection.

Name of the model to download and use for speech synthesis

Interface name

Name of this virtual host

Whether to enable Go Ethereum Node.

Additional arguments passed to Go Ethereum.

This option provides a simple way to serve individual, static files.

This option provides a simple way to serve individual, static files.

An existing Let’s Encrypt certificate to use for this virtual host

Name of the control, as it appears in alsamixer

The name of this relay group

Database name.

Database name.

Database name.

Database name.

Database name.

Database name.

Database name.

Database name.

The serial port to which your UPS is connected. /dev/ttyS0 is usually the first port on Linux boxes, for example.

The device to update.

Interface name

The name of the dawarich database.

MySQL database name.

Database name for FreshRSS.

The name identifying the runner instance towards the Gitea/Forgejo instance.

Whether to enable this PPP peer.

Port to bind the TTS server to.

User account under which this pool runs.

A name for the drive

Name of the local AutoSSH session

Whether to ask Let’s Encrypt to sign a certificate for this virtual host

Listed primary servers are allowed to notify this secondary server

Master=false means slave server

Addresses who may request zone transfers.

Limit retry time for secondary zones.

Whether to enable this RAUC slot.

Name of the satellite.

Environment variables used for this PHP-FPM pool.

static: Immediately answer any Neighbor Solicitation Messages (if they match the IP rule). iface: Forward the Neighbor Solicitation Message through the specified interface and only respond if a matching Neighbor Advertisement Message is received. auto: Same as iface, but instead of manually specifying the outgoing interface, check for a matching route in /proc/net/ipv6_route.

Username

Name of the modifier.

The port on which the SFTP server will listen

Whether to enable TLS support.

Whether this interface is virtual and should be created by tunctl

Whether to enable ‹name›.

pppd configuration for this peer, see the pppd(8) man page.

This option provides a simple way to serve individual, static files.

The name of services's user

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Whether to enable ‹name›.

Enable recommended proxy settings.

Enable recommended uwsgi settings.

Tunnel type.

Port number of Go Ethereum metrics service.

Listen address of Go Ethereum HTTP API.

Name of modem configuration file, will be searched for in config in the spooling area directory.

Host which to proxy requests to if ACME challenge is not found

Port number of Go Ethereum Auth RPC API.

Whether to offload computation onto a CUDA compatible GPU.

The name of this gateway group

Enables nylon as a running service upon activation.

The account name

Keyset used for tunnel identity.

Group account under which this pool runs.

SSID to be used in IEEE 802.11 management frames.

The ID of your hook

Database name.

Tunnel type.

Text of the file.

The name of this resource

The name of this server.

Limit retry time for secondary zones

Database name.

Keyset used for tunnel identity.

Controls how long a valid or invalid entry remains in the cache, in milliseconds.

If the specified units are stopped or restarted, then this unit is stopped or restarted as well.

Node name

The cgit package to use.

The geth package to use.

Uhub plugin configuration.

Shell commands executed to stop the service.

Source directories.

Database name.

Database name.

Service port

IP of the Redis master

In case of a virtual device, the user who owns it. null will not set owner, allowing access to any user.

Packages added to the service's PATH environment variable

Database name to use when connecting to an external or manually provisioned database; has no effect when a local database is automatically provisioned

Discourse database name.

Whether to enable SFTP service.

DNS full-qualified domain name of a database server

DNS full-qualified domain name of a database server

The location of the Drupal files directory.

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Enable unlocking and mounting of encrypted ZFS home dataset at login.

Members of this group can access the control socket for this interface.

Name of the beat

The location of the Drupal site state directory.

Start the specified units when this unit is started.

Path to world folder containing the dimension to render

List of servers for inclusion in stub and secondary zones.

The IP interface to bind to. null means "all interfaces".

Name of directory from which to import ZFS device, this is passed to zpool import as the value of the -d option

The network to connect to

List of address ranges allowed to query this zone

The account UID

Name of the symlink (relative to /var/lib/rancher/k3s/server/manifests)

Whether the SSID is to be interpreted using UTF-8 encoding.

File or block device to export.

Bind address for ‹name› endpoint.

Contents of the PAM service file.

Key / certificate pairs for the virtual host.

Key policy for zone signing keys

Key policy for key signing keys

A systemd service name to use (without .service suffix).

A systemd service name to use (without .service suffix).

Specifies the number of retries for failed notifies

If the specified units are started at the same time as this unit, delay this unit until they have started.

The user's home directory.

Proxy account name, without the possibility to include domain name ('at' sign is interpreted literally).

Which local IP to bind the UDP socket to.

A system group name for this client instance.

A system group name for this client instance.

Interface to use when method is iface.

Database name.

When to run the job.

The name of the first admin user.

Bind address for ‹name› endpoint.

Key size in bits

Key size in bits

Override the default port on which to listen for JSON-RPC connections.

Shell commands executed after the service's main process has exited.

The address on which to accept FastCGI requests.

If the specified units are stopped or restarted, then this unit is stopped or restarted as well.

Database name.

The TCP port to accept connections

These lines go to the end of cgitrc verbatim.

Shell commands executed to stop the service.

The name of this systemd unit, including its extension

The specified name-string gives the system file name of the storage device managed by this storage daemon

The name of the network interface to match against.

Whether to enable Drupal web application.

Extra arguments to pass to the server commandline.

Whether to enable Coqui TTS server.

port of the Redis master

The name of the Grafana database.

Units that want (i.e. depend on) this unit

Location of hardware kiss tnc for this interface.

Server name to verify the hostname on the returned gRPC certificates

Apache configuration can be done by adapting services.httpd.virtualHosts.<name>

Backup type as described in: https://pgbackrest.org/command.html#command-backup/category-command/option-type

Run the rsync process with an inhibition lock taken; see systemd-inhibit(1) for a list of possible operations.

The kimai package to use.

The tahoelafs package to use.

Specifies the MAC addresses to deny if macAcl is set to "deny" or "radius"

The name of this client as shown in firezone

Packages added to the service's PATH environment variable

Extra zone config to be appended at the end of the zone section.

Shell commands executed before the service's main process is started.

Apache configuration can be done by adapting services.httpd.virtualHosts.<name>

A system group name for this client instance.

A system group name for this client instance.

Like ‘requires’, but in addition, if the specified units unexpectedly disappear, this unit will be stopped as well.

Enable logging, default is no logging.

If set, root doesn't need to authenticate (e.g. for the useradd service).

Verify peer certificate

Verify peer certificate

Start the specified units when this unit is started.

Levels (minimum value for logged events): 0 = verbose debugging 1 = debugging 2 = informational messages 3 = notification 4 = warning

Allow these IPs and TSIG to transfer zones, addr TSIG|NOKEY|BLOCKED address range 192.0.2.0/24, 1.2.3.4&255.255.0.0, 3.0.2.20-3.0.2.40

Text of the file.

Whether to enable helper service.

Password HMAC-SHA-256 for JSON-RPC connections

DNS full-qualified domain name of a database server

As which user the backup should run.

Vertical scaling factor/pixels.

Horizontal scaling factor/pixels.

Network interface to bind to.

Name of the tun device

Options for the Kimai PHP pool

Name of Google storage bucket

Path to the unix socket file on which to accept FastCGI requests.

List of virtual hostnames from which to accept requests.

IP address of server running hans

The location for users to install Drupal themes.

Limit refresh time for secondary zones.

Limit on the number of simultaneous connections allowed.

Output DPI configuration.

If the specified units are started at the same time as this unit, delay this unit until they have started.

The serial port speed of this interface.

GVPE node name

Whether to enable Go Ethereum prometheus metrics.

RPC user information for JSON-RPC connections.

IP and port to which this redis instance acts as a slave.

Shell commands executed as the service's main process.

Name of the voice model to use

The furl for a Tahoe helper node

Specifies the MAC addresses to allow if macAcl is set to "allow" or "radius"

Whether to enable Go Ethereum Auth RPC API.

Shell commands executed after the service's main process is started.

Shell commands executed when the service's main process is reloaded.

The friendly name you give to the network device

The friendly name you give to the network device

Host which to proxy requests to if ACME challenge is not found

Whether to show the message of the day.

User account under which this instance of redis-server runs.

Specify the log file name

Database name.

Database name.

Name of database.

If the specified units are started at the same time as this unit, delay them until this unit has started.

Domain part of the web interface URL (no web interface for this domain if null)

Shell commands executed after the service's main process has exited.

Guaranteed minimum hops for ‹name› tunnels.

If set, the OATH Toolkit will be used.

Output resolution.

Output framerate.

Name of the PostgreSQL database.

The name of the Linkwarden database.

Name of the remote read config, which if specified must be unique among remote read configs

Protocol names to hide in summary tables (RE2 syntax),

Automatically start this unit at the given date/time, which must be in the format described in systemd.time(7)

The number of shares required to store a file.

The name of the database to create.

Local Mattermost database name.

The schedule in which data is persisted to disk, represented as a list of lists where the first element represent the amount of seconds and the second the number of changes

The type of this worker

Path of the source file.

Settings for this slot.

Address to which spiped should connect.

Output video display controller.

The domain name to collect stats for.

Guaranteed minimum hops for ‹name› tunnels.

The number of distinct storage nodes required to store a file.

The user as which to run bitcoind.

Blockchain sync mode.

Maximum peers to connect to.

Specifies the BSSID for this BSS

Name of the MySQL database that holds EPGStation's data.

Name of the beat

If set, the OTPW system will be used (if ~/.otpw exists).

If set, keys listed in ~/.ssh/authorized_keys and ~/.eid/authorized_certificates can be used to log in with the associated PKCS#11 tokens.

This is a rule that the target address is to match against

Isolate traffic between stations (clients) and prevent them from communicating with each other.

If set, the calling user's SSH agent is used to authenticate against the configured keys

Shell commands executed when the instance is starting.

Name of the homebridge UI platform

Shell commands executed before the service's main process is started.

Whether users can log in with passwords defined in /etc/shadow.

Specify the server verbosity level, options: debug, verbose, notice, warning.

The path to repo in local machine

Like ‘requires’, but in addition, if the specified units unexpectedly disappear, this unit will be stopped as well.

Maximum number of items to keep in slow log.

Database user.

Specify the program to run to talk to this UPS. apcsmart, bestups, and sec are some examples.

Name of the font to use for regreet.

Units that want (i.e. depend on) this unit

Station MAC address -based authentication

The drupal package to use.

The path of a PEM encoded TLS private key

The path of a PEM encoded TLS private key

URL of the accounts server.

Override the default port on which to listen for connections.

Database host address.

Database host port.

Public address for p2p connections from peers (if TCP is used)

This option provides a simple way to serve individual, static files.

Name of a file containing the spiped key

Path to key file

Keep this unit running as long as the listed units are running

Attrset to be transformed into YAML for host config

Address to bind on for UI connections

Environment variables to set for the kernel.

Enable logging to the system logger.

Whether to enable Redis server.

Number of worker instances to run

Path to the certificate authority certificate.

See torrc manual.

cgit configuration, see cgitrc(5)

Configuration of uhub

The user's home directory mode in numeric format

TCP Port to bind on for UI connections

Enable PAM mount (pam_mount) system to mount filesystems on user login.

Output gamma configuration.

Disables scan for overlapping BSSs in HT40+/- mode

The specified name-string names the type of media supported by this device, for example, DLT7000

Name of the remote write config, which if specified must be unique among remote write configs

Turns on or off the router flag for Neighbor Advertisement Messages.

The name of the host in the network as well as the configuration for that host

Whether this file locals should be generated

Authentication algorithm for this key.

Specifies the frequency band to use, possible values are 2g for 2.4 GHz, 5g for 5 GHz, 6g for 6 GHz and 60g for 60 GHz.

The user's primary group.

A name for the drive

DNS server to use as an intermediate relay to the iodined server

Name of the user to ensure.

Replace any existing runner with the same name

Limit refresh time for secondary zones

Public URL of the API address of the reverse proxy/tls terminator

Options for the Drupal PHP pool

Specifies if TLS should be enabled

Specifies if TLS should be enabled

The repo of the Helm chart

Whether to enable storage service.

URI to bind the wyoming server to.

Whether to enable this PAM service.

Path or reference to the host key.

Additional TLS/SSL-related configuration options

The external location that the node should listen on

Group account under which this instance of redis-server runs.

The domain name under which to set up the virtual host.

Settings that should be passed to rsync via long options

The hash of the packaged Helm chart

Number of ElGamal/AES tags to send.

Page or namespace to restrict

The location of the Drupal config sync directory.

Shell commands executed as the service's main process.

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

Host which to proxy requests to if ACME challenge is not found

The data directory for bitcoind.

Event type.

Aliases of that unit.

Path to the accounts file.

Name of this virtual host

Specifies a file containing the MAC addresses to deny if macAcl is set to "deny" or "radius"

Device identifiers, as shown by keyd(1).

If given, sets the SO_MARK option on the TCP socket.

If given, sets the SO_MARK option on the TCP socket.

Name of the homebridge

TTL for dnssec records

Shell commands executed after the service's main process is started.

Shell commands executed when the service's main process is reloaded.

The type of log being collected.

If set, users listed in $XDG_CONFIG_HOME/Yubico/u2f_keys (or $HOME/.config/Yubico/u2f_keys if XDG variable is not set) are able to log in with the associated U2F key

Location of bitcoind pid file.

The packaged Helm chart

Port to bind on for p2p connections from peers (both TCP and UDP)

Address to bind on for p2p connections from peers (both TCP and UDP)

The delay time (in microseconds) on failure.

The number of shares required to reconstitute a file.

Local secret key in hexadecimal form.

Command and arguments to start the kernel.

TLS Options for the Director in this Configuration.

Bind address to be used for this server.

TLS Options for the Director in this Configuration.

Port the NetBird client listens on.

Port the NetBird client listens on.

HTTP status used by globalRedirect & forceSSL

If the specified units are started at the same time as this unit, delay them until this unit has started.

User name for RPC connections.

Remote public key in hexadecimal form.

Number of ElGamal/AES tags to send.

Path to the SSH host public key.

Name of the nginx virtualhost to use and setup

The database name.

The location for users to install Drupal modules.

I2P nodes that are allowed to connect to this service.

Shell commands executed when the instance is shutting down.

URL where this inbox can be accessed over HTTP.

How frequently to change keys

How frequently to change keys

The name of private PKCS #8 key file for this policy to be found in the baseDirectory, or the absolute path to the key file

The znapzend backup plan to use for the source

Common name attribute of allowed peer certificates

Common name attribute of allowed peer certificates

Output scaling method.

UUID(s) of VGPU device

Text of the file.

A program name specifying a Postfix service/daemon process

Address to bind on for API connections relied by the reverse proxy/tls terminator.

Port to bind on for API connections relied by the reverse proxy/tls terminator.

Whether to try to create home directories for users with $HOMEs pointing to nonexistent locations on session login.

The group as which to run bitcoind.

Name shown in the website title and on the front page.

Listen address of Go Ethereum metrics service.

Options for PHP's php.ini file for this Drupal site.

Don't send the password immediately after login, but store for PAM session.

The group GID

If set, the pam_mysql module will be used to authenticate users against a MySQL/MariaDB database.

APIs to enable over WebSocket

Path to the host certificate.

Name of the symlink (relative to /var/lib/rancher/rke2/server/manifests)

Access Control Lists: see https://www.dokuwiki.org/acl Mutually exclusive with services.dokuwiki.aclFile Set this to a value other than null to take precedence over aclFile option

Automatically start this unit at the given date/time, which must be in the format described in systemd.time(7)

Whether to operate in tun (IP) or tap (Ethernet) mode.

Structural Kimai's local.yaml configuration

Listen address of Go Ethereum Auth RPC API.

Whether to run the check command with the provided checkOpts options.