List of ‹name› add-on packages to install for this profile

Attribute set of LibreWolf profiles.

When enabled, the user must authorize requested permissions for all extensions from programs.librewolf.profiles.<profile>.extensions.packages in programs.librewolf.profiles.<profile>.extensions.settings.<extensionID>.permissions

When enabled, programs.librewolf.profiles.<profile>.extensions.settings.<extensionID>.permissions must specify the exact set of permissions that the extension will request

profile attribute set.

Profile name

Attribute set of LibreWolf preferences

Commands executed after the profile is successfully applied

Custom bookmarks.

Json formatted options for this extension.

Settings for this profile

Attribute set of options for each extension

Outputs configuration.

Profile GC root policies.

Forcibly override any existing configuration for this extension.

Paths to the Nix profile

Extra preferences to add to user.js, before programs.firefox.profiles._name_.settings

Defines an alias for the output

Scales the output by the specified scale factor.

Attribute set of Floorp preferences

Enables or disables the specified output.

Attribute set of Firefox preferences

Retention period for the GC roots in this profile.

Colima configuration settings, see https://github.com/abiosoft/colima/blob/main/embedded/defaults/colima.yaml or run colima template.

Keep the latest N GC roots in this profile.

Whether to override all previous firefox settings

Allowed permissions for this extension

Json formatted options for this extension.

<width>x<height>[@<rate>[Hz]]

Configures the specified output to use the specified mode

Sets the output transform.

Settings for this site

Custom bookmarks.

Enables or disables adaptive synchronization (aka

<x>,<y>

Places the output at the specified position in the global coordinates space.

Json formatted options for this extension.

Custom bookmarks.

Preferences to add to this profile's user.js.

The criteria can either be an output name, an output description or "*"

The maximum charge level to help reduce battery wear:

• high_capacity charges to 100% (driver default)
• balanced charges to 90%
• stationary charges to 80% (maximum lifespan)

Note: Regardless of the configured charging profile, the operating system will always report the battery as being charged to 100%.

List of ‹name› add-on packages to install for this profile

Attribute set of options for each extension

Whether to enable this angrr policy.

Makes user-profiles globally available under nextcloud.tld/u/user.name

List of ‹name› add-on packages to install for this profile

Attribute set of options for each extension

Extra preferences to add to user.js, before programs.firefox.profiles._name_.settings

Forcibly override any existing configuration for this extension.

List of ‹name› add-on packages to install for this profile

Forcibly override any existing configuration for this extension.

Extra preferences to add to user.js, before programs.firefox.profiles._name_.settings

Profile ID

Whether to keep the last booted system generation

Whether to keep the current system generation

Whether to override all previous firefox settings

The input method configure in profile file in ini format.

The input method configure in profile file in ini format.

Profile name.

Profile path.

Whether to override all previous firefox settings

Allowed permissions for this extension

Niceness.

CPU scheduler priority.

IO scheduler priority.

Allowed permissions for this extension

CPU scheduler class.

IO scheduler class.

Which string the terminal should send to an application when the user presses the Backspace key.

auto : Attempt to determine the right value from the terminal's IO settings.

ascii-backspace : Send an ASCII backspace character (0x08).

ascii-delete : Send an ASCII delete character (0x7F).

delete-sequence : Send the @7 control sequence.

tty : Send terminal's "erase" setting.

Process matchers.

Directories to search for profiles, separated by , or ;.

Whether this is a default profile.

Whether to integrate the MCP servers config from programs.mcp.servers into programs.vscode.profiles.<name>.userMcp

Profile to use for the system.

Automatically login user on remote or other kind of externally supplied authentication, otherwise redirect to login form as normal

Whether to enable Libravatar as profile picture source on your instance

Attrset of dconf profiles

Declarative search engine configuration.

Attribute set of feed accounts

Custom LibreWolf user chrome CSS.

Container ID

Extra preferences to add to user.js.

Custom LibreWolf user content CSS.

The order the search engines are listed in

Profile ID

Whether to force replace the existing search configuration

Whether to enable API access for mobile apps and third-party clients (Google Reader API and Fever API)

Custom ordering of accounts and local folders in Thunderbird's folder pane

Declarative bookmarks.

Profile ID

The default search engine used in the address bar and search bar.

Submodule for installing and configuring extensions.

Whether to force override existing custom bookmarks.

Attribute set of search engine configurations

Attribute set of container configurations

Declaratively define NetworkManager profiles

The default search engine used in the Private Browsing.

Container icon.

Container name, e.g., shopping.

Configuration file to define custom bookmarks.

Whether to force replace the existing containers configuration

Container color.

Profile name.

Profile path.

Profiles allow multiple colima configurations

Profile path.

Profile name.

Keyboard profile to apply at boot time

List of maintainers of each module

Sub-configuration options for specific profiles written to $XDG_CONFIG_HOME/mpv/mpv.conf

Set to true to disable the use of Gravatar for user profile images.

Whether this is a default profile.

The Nix profile name.

Profile name, defaults to 'system' (NixOS).

A set of Gnome Terminal profiles

The certificate profile to choose if the CA offers multiple profiles.

Extra profiles for Element

Whether this is a default profile.

List of maintainers of each module

Attribute set of Floorp profiles.

A list of all VSCode profiles

Profile hook scripts.

Path, relative to HOME, where Home Manager should write the X profile script.

Whether this is a default profile

Name of the profile.

Per output profile configuration.

Whether this should be the default profile.

Free-form settings mapped to the qBittorrent.conf file in the profile

Custom configuration profiles for schroot.

Attribute set of Firefox profiles.

Attribute set of profile options

Extra commands that should be added to .zprofile.

The profile directory where Home Manager generations are installed.

Whether to enable update checks/notifications

The profile name.

The certificate profile to choose if the CA offers multiple profiles.

Extra commands that should be run when initializing a login shell.

Attribute set of global LibreWolf settings and overrides

Name of the default cryptographic profile chosen from the profile_dir directory.

The font name, null to use system default.

Profile name

Configuration written to Visual Studio Code's mcp.json

Attribute set of site options for this profile

Container ID

Declarative search engine configuration.

Profile access endpoint.

Autorandr profiles specification.

Container ID

The terminal colors, null to use system default.

Configuration written to Visual Studio Code's tasks.json

Custom Floorp user chrome CSS.

If true, allow applications in the terminal to make text boldface.

Declarative search engine configuration.

Run command as a login shell.

A file in the format described in fstab(5), used to mount filesystems inside the chroot

Extra preferences to add to user.js.

Commands executed after the profile is successfully applied

The cursor shape.

Whether bold text is shown in bright colors.

Package providing the font

Custom Floorp user content CSS.

Custom Firefox user chrome CSS.

The profile file contents

Turn on/off the terminal's bell.

Whether to enable update notifications for extensions

The order the search engines are listed in

The cursor blink mode.

Extra preferences to add to user.js.

The color for the terminal cursor.

Whether to scroll when output is written.

Custom Firefox user content CSS.

The bold color, null to use same as foreground.

Extra shell commands to run before session start.

Whether this profile will run as a service.

Whether to force replace the existing search configuration

The order the search engines are listed in

The terminal palette.

Declarative bookmarks.

Package providing the font

Package providing the font

Package providing the font

The command to use to start the shell, or null for default shell.

Whether to set this profile as:

• active docker context
• active kubernetes context
• active incus remote Exactly one or zero profiles should have this option set.

Attribute set of Thunderbird profiles.

The default search engine used in the address bar and search bar.

Configuration written to Visual Studio Code's settings.json

Whether to force replace the existing search configuration

Whether the scroll bar should be visible.

Defines global user snippets.

Declarative bookmarks.

Profile hook scripts.

The named AWS profile used to authenticate.

A list of files to copy into the chroot from the host system.

The default search engine used in the address bar and search bar.

Output DPI configuration.

Directory that contains all cryptographic profiles known to FAPI.

Submodule for installing and configuring extensions.

Output resolution.

Output framerate.

The extensions Visual Studio Code should be started with.

Profiles for TuneD

Package providing the theme

Package providing the icon theme

Output video display controller.

This profile's name.

Per output profile configuration.

Whether to force override existing custom bookmarks.

When enabled, the user must authorize requested permissions for all extensions from programs.floorp.profiles.<profile>.extensions.packages in programs.floorp.profiles.<profile>.extensions.settings.<extensionID>.permissions

Start URL of the site.

Attribute set of container configurations

The colors for the terminal’s highlighted area.

Output gamma configuration.

Name of the site.

Attribute set of profiles.

When enabled, the user must authorize requested permissions for all extensions from programs.firefox.profiles.<profile>.extensions.packages in programs.firefox.profiles.<profile>.extensions.settings.<extensionID>.permissions

Submodule for installing and configuring extensions.

Whether to force override existing custom bookmarks.

Horizontal scaling factor/pixels.

Vertical scaling factor/pixels.

The number of scrollback lines to keep, null for infinite.

Names of the Disnix profiles to expose in the system's PATH

Whether to enable the output.

Defines user snippets for different languages.

Output rotate configuration.

Attribute set of container configurations

Container icon.

Interpolation method to be used for scaling the output.

The default search engine used in the Private Browsing.

the path passed to qbittorrent via --profile.

Attribute set of search engine configurations

Configuration file to define custom bookmarks.

Container name, e.g., shopping.

Declarative search engine configuration.

The content of /etc/asusd/profile.ron

Package providing the theme

Package providing the icon theme

Package providing the theme

Package providing the theme

Package providing the icon theme

Package providing the icon theme

Container color.

Sets the pointer acceleration profile to the given profile

Which string the terminal should send to an application when the user presses the Delete key.

auto : Send the @7 control sequence.

ascii-backspace : Send an ASCII backspace character (0x08).

ascii-delete : Send an ASCII delete character (0x7F).

delete-sequence : Send the @7 control sequence.

tty : Send terminal's "erase" setting.

Whether output should be marked as primary

Definition of sandbox profiles.

When enabled, programs.floorp.profiles.<profile>.extensions.settings.<extensionID>.permissions must specify the exact set of permissions that the extension will request

Container icon.

The default search engine used in the Private Browsing.

Custom Thunderbird user chrome CSS.

Keybindings written to Visual Studio Code's keybindings.json

Whether to force replace the existing containers configuration

Container name, e.g., shopping.

Configuration file to define custom bookmarks.

Attribute set of search engine configurations

Text of the file.

Package providing the cursor theme

The foreground color.

The background color.

Extra lines to append to this profile's config.

Output scale configuration

Output scaling method.

Container color.

When enabled, programs.firefox.profiles.<profile>.extensions.settings.<extensionID>.permissions must specify the exact set of permissions that the extension will request

Extra preferences to add to user.js.

Output position

Custom Thunderbird user content CSS.

Whether to force replace the existing containers configuration

Preswitch hook executed before mode switch.

The profile's name.

Settings for mc/ini file

Predetect hook executed before autorandr attempts to run xrandr.

The background color.

The foreground color.

The order the search engines are listed in

Sets the pointer acceleration profile to the given profile

Package providing the cursor theme

Package providing the cursor theme

Package providing the cursor theme

Whether to force replace the existing search configuration

URL of the site's web app manifest.

Package providing the font

Attribute set of environment variable

Postswitch hook executed after mode switch.

A list of profiles used to setup the global environment.

A list of profiles used to setup the global environment.

System databases (as described in /etc/nsswitch.conf on GNU/Linux systems) to copy into the chroot from the host.

Refer to xrandr(1) for the documentation of the transform matrix.

Path of the source file.

Combined stdout and stderr log file for the Colima service.

The default search engine used in the address bar and search bar.

Background transparency in percent.

Output name to EDID mapping

Icon to display in file manager, menus, etc.

Configuration to write to the advancedsettings.xml file in kodis userdata directory

Allow using external GPG keys with GPGME.

This feed account's name.

List of maintainers of each module

Autorandr profiles specification.

The background color.

The foreground color.

Whether to enable the desktop entry for this site.

Configuration settings for amp

List of maintainers of each module

Outputs configuration.

Settings written to config.toml

Ruff configuration

Configuration settings for yofi

The default search engine used in the Private Browsing.

The configuration settings for ukify

Map of PPD profiles to native TuneD profiles.

Configuration settings for aiac

NNCP configuration, see http://www.nncpgo.org/Configuration.html

Configuration settings for zapzap

Attribute set of search engine configurations

The power-profiles-daemon package to use.

Settings to be written to the Cava configuration file

Khard settings

Settings to write to the Xfconf configuration system.

Settings to be written to the Tofi configuration file

Whether to enable power-profiles-daemon, a DBus daemon that allows changing system behavior based upon user-selected power profiles.

List of store paths to make accessible.

List of maintainers of each module

Configuration settings for tray-tui

Configuration settings for algia

Configuration settings for aliae

Settings on what to generate

Defines an alias for the output

List of maintainers of each module

Custom ordering of calendar accounts

Scales the output by the specified scale factor.

Configuration settings for radio-cli

Settings written to ~/.config/mcfly/config.toml

Settings written to $XDG_CONFIG_HOME/ranger/rc.conf.

A list of profiles to enable

Settings for sm64ex's $XDG_DATA_HOME/sm64pc/sm64config.txt file.

Configuration settings for andcli

Jqp configuration

Configuration settings for swappy

Configuration settings for retext

Configuration settings for animdl

Configuration settings for trippy

Configuration settings for amfora

Categories in which the entry should be shown in a menu.

An attribute set of lf settings

Enables or disables the specified output.

Configuration settings for aider-chat

Configuration settings for lazysql.

Configuration written to $XDG_CONFIG_HOME/gh/config.yml.

Additional settings (see mjolnir default config for available settings)

Meli Configuration

List of maintainers of each module

Configuration settings for twitch-tui

Settings for LACT

Named AWS profile used to connect to the API.

Configuration included in $YAZI_CONFIG_HOME.

Whether to allow read access to FHS paths like /etc and /var.

Bacon configuration written to either Library/Application Support/org.dystroy.bacon/prefs.toml (darwin) or $XDG_CONFIG_HOME/bacon/prefs.toml

Configuration settings for i3bar-river

Parameters to be written to the system-wide bat configuration file.

Configuration options for imv

Settings to be added to pimsync.conf

Configuration written to $HOME/.mrconfig See https://myrepos.branchable.com/ for an example configuration.

List of paths that should be read-only inside the sandbox.

Parameters to be written to /etc/atoprc.

The user-specific npm configuration

rbw configuration, if not defined the configuration will not be managed by Home Manager.

Schroot configuration settings

Configuration settings for abaddon

Configuration settings for aphorme

Configuration settings for airlift

Configuration settings for kickoff

List of paths that should be read/write inside the sandbox.

<width>x<height>[@<rate>[Hz]]

Configures the specified output to use the specified mode

Add settings here to override NixOS module generated settings

Configuration written to $XDG_CONFIG_HOME/ty/ty.toml

Configuration written to $XDG_CONFIG_HOME/uv/uv.toml

Output DPI configuration.

Configuration options added to alot configuration file.

Available configuration options for yarn see: https://yarnpkg.com/configuration/yarnrc

Configuration written to $XDG_CONFIG_HOME/rio/config.toml

A path of a profile file to include

Configuration written to $XDG_CONFIG_HOME/zk/config.toml

Ashell configuration written to $XDG_CONFIG_HOME/ashell/config.toml (0.5.0+) or $XDG_CONFIG_HOME/ashell/config.yaml (<0.5.0)

Configuration settings for halloy

Output resolution.

Output framerate.

Configuration settings for formiko

Configuration options to add to the various sections in the configuration file.

Configuration options to add to $XDG_CONFIG_HOME/htop/htoprc.

Configuration options for wofi

Configuration written to $XDG_CONFIG_HOME/.bunfig.toml

Configuration written to $XDG_CONFIG_HOME/lsd/config.yaml

Verbatim config entries

Automatically sync on profile open/close.

Vesktop settings written to $XDG_CONFIG_HOME/vesktop/settings.json

Output video display controller.

Configuration written to $XDG_CONFIG_HOME/.vintrc.yaml

Options to add to the config.toml file

Options to add to btop.conf file

Configuration settings for anvil-editor

Configuration written to $XDG_CONFIG_HOME/gh-dash/config.yml.

Settings written as JSON to ~/.config/vicinae/settings.json

Configuration written to $XDG_CONFIG_HOME/mypy/config

Configuration written to $XDG_CONFIG_HOME/git/config

Configuration settings for fresh-editor

Output gamma configuration.

Configuration written to $XDG_CONFIG_HOME/tiny/config.yml

Configuration for the jrnl binary

Configuration written to $XDG_CONFIG_HOME/sqls/config.yml

Neovide configuration

Attribute set of Nheko preferences (converted to an INI file)

Configuration written to $XDG_CONFIG_HOME/infat/config.toml.

Configuration written to $XDG_CONFIG_HOME/beets/config.yaml

The configuration file to be used for clock-rs

Configuration written to $XDG_CONFIG_HOME/foot/foot.ini

Configuration written to $XDG_CONFIG_HOME/mods/mods.yml

Configuration written to $XDG_CONFIG_HOME/yazi/yazi.toml

Configuration written to $XDG_CONFIG_HOME/iamb/config.toml

Configuration settings for alistral

Configuration included in vfs.toml

Configuration included in config.toml

Available configuration options for the .cargo/config see: https://doc.rust-lang.org/cargo/reference/config.html

Configuration settings for mako

GnuPG configuration options

Vencord settings written to $XDG_CONFIG_HOME/vesktop/settings/settings.json

Configuration written to $XDG_CONFIG_HOME/pqivrc

Configuration for sesh, written to ~/.config/sesh/sesh.toml

The pylint configuration.

Configuration settings for Onedrive

Configuration settings for aperture

Configuration settings for WaveTerm

Whether to enable the Profile Sync daemon.

Vertical scaling factor/pixels.

Horizontal scaling factor/pixels.

Configuration written to $XDG_CONFIG_HOME/noti/noti.yaml

<x>,<y>

Places the output at the specified position in the global coordinates space.

Whether to enable the output.

Output rotate configuration.

Configuration written to $XDG_CONFIG_HOME/pgcli/config

Configuration written to $XDG_CONFIG_HOME/lapce/settings.toml

Configuration written to $XDG_CONFIG_HOME/kitty/kitty.conf

The email address for your bitwarden account.

Sets the output transform.

Enables or disables adaptive synchronization (aka

Options to add to aria2.conf file

Whether to enable Profile-sync-daemon service.

Configuration settings for intelli-shell

Configuration included in yazi.toml

Configuration written to $XDG_CONFIG_HOME/micro/settings.json

Configuration written to $XDG_CONFIG_HOME/papis/config

Configuration written to $XDG_CONFIG_HOME/havoc.cfg

Configuration written to $XDG_CONFIG_HOME/inori/config.toml

Configuration written to $XDG_CONFIG_HOME/k9s/config.yaml (linux) or Library/Application Support/k9s/config.yaml (darwin), See https://k9scli.io/topics/config/ for supported values.

Configuration written to $XDG_CONFIG_HOME/nix-init/config.toml

Plugin settings to include.

Configuration written to $XDG_CONFIG_HOME/helix/config.toml

Configuration written to $XDG_CONFIG_HOME/atuin/config.toml

Configuration for foot terminal emulator

Extra global default configuration for htop which is read on first startup only

The settings to set for desktoppr.

Direnv configuration

Direnv configuration

Configuration written to $HOME/.aws/config.

Configuration for Waybar, see https://github.com/Alexays/Waybar/wiki/Configuration for supported values.

Configuration for wleave

Configuration settings for FreeTube

JSON config for gemini-cli

System-wide configuration for GameMode (/etc/gamemode.ini)

Configuration options for bemenu

Options to add to config.toml

Free form attribute set for aMule settings

Configuration written to $XDG_CONFIG_HOME/git-cliff/cliff.toml

Configuration for Satty written to $XDG_CONFIG_HOME/satty/config.toml

Whether output should be marked as primary

Whether to allow network access inside the sandbox.

Attribute set of environment variable used in the global environment

Configuration written to $XDG_CONFIG_HOME/navi/config.yaml on Linux or $HOME/Library/Application Support/navi/config.yaml on Darwin

Configuration written to $XDG_CONFIG_HOME/oh-my-posh/config.json

The criteria can either be an output name, an output description or "*"

Configuration options for chawan

Configuration written to $HOME/.opk/config.yml

Configuration included in theme.toml

Extra settings appended to the configuration of davfs2

Configuration written to $XDG_CONFIG_HOME/gurk/gurk.toml or Library/Application Support/gurk/gurk.toml

Key value pairs to write to gradle.properties in the Gradle home directory.

Options to configure diff-so-fancy

Settings

Output scaling method.

Configuration written to $XDG_CONFIG_HOME/piston-cli/config.yml.

Available configuration options for the Docker CLI see: <https://docs.docker.com/reference/cli/docker/#docker-cli-configuration-file-configjson-properties

Configuration written to $XDG_CONFIG_HOME/bottom/bottom.toml

RetroArch configuration settings

Configuration settings for Distrobox

JSON config for HyFetch

Settings to be written to the underlying Cava configuration file

JSON configuration for Claude Code settings.json

Configuration written to $XDG_CONFIG_HOME/yambar/config.yml

Configuration written to $XDG_CONFIG_HOME/ledger/ledgerrc

Configuration written to $XDG_CONFIG_HOME/ncspot/config.toml

Extra configuration appended to the end.

Output position

The profile-sync-daemon package to use.

Whether to enable modal (vim) mode.

Odoo configuration settings

Configuration written to $XDG_CONFIG_HOME/tex-fmt/tex-fmt.toml on Linux or $HOME/Library/Application Support/tex-fmt/tex-fmt.toml on Darwin

Lazygit configuration

Radicle configuration, written to `~/.radicle/config.json.

Preswitch hook executed before mode switch.

looking-glass-client settings.

Whether to enable periodic garbage collection for user profile and nix store with nh clean user.

Nushell settings

Settings for MaryTTS

Output scale configuration

ncdns settings

ReGreet configuration file

Configuration for Discord

Predetect hook executed before autorandr attempts to run xrandr.

Whether to allow localhost network access inside the sandbox.

Configuration written to CODEX_HOME/config.toml (0.2.0+) or ~/.codex/config.yaml (<0.2.0)

Configuration for fuzzel written to $XDG_CONFIG_HOME/fuzzel/fuzzel.ini

Configuration included in keymap.toml

Picom settings

Settings option for systemd-oomd

Settings passed directly to lutris for this runner's config at XDG_CONFIG/lutris/runners.

sslh configuration

Options to add to the config.toml file

Configuration settings for sway-easyfocus

Picom settings

The editor that gh should run when creating issues, pull requests, etc

Configuration written to $XDG_CONFIG_HOME/yt-dlp/config

Configuration written to $XDG_CONFIG_HOME/wallust/wallust.toml

Configuration written to $XDG_CONFIG_HOME/ghostty/config

Configuration written to ~/.earthly/config.yml file

Configuration written to $XDG_CONFIG_HOME/vinegar/config.toml

Added to config.dconf.settings under com/github/johnfactotum/Foliate, the scheme is defined at <https://github.com/johnfactotum/foliate/blob/gtk4/data/com.github.johnfactotum

Configuration for $XDG_CONFIG_HOME/hexchat/hexchat.conf, see https://hexchat.readthedocs.io/en/latest/settings.html#list-of-settings for supported values.

Settings for Newt module, see Newt CLI docs for more information.

The configuration object

The settings that will be written to the avizo configuration file.

Aliases that allow you to create nicknames for gh commands.

Options to add to the PyRadio config file

Extra configuration lines to add to $XDG_CONFIG_HOME/nvim/coc-settings.json See https://github.com/neoclide/coc.nvim/wiki/Using-the-configuration-file for options.

Configuration written to $XDG_CONFIG_HOME/nix-search-tv/config.json

Configuration written to $XDG_CONFIG_HOME/pypoetry/config.toml on Linux or $HOME/Library/Application Support/pypoetry/config.toml on Darwin

Configuration written to $XDG_CONFIG_HOME/joshuto/joshuto.toml

Attribute set from name of a setting to its value

Configuration written to $XDG_CONFIG_HOME/swayimg/config

Settings to write to ntp.toml

See https://docs.ntpd-rs.pendulum-project.org/man/ntp.toml.5 for more information about available options.

Settings for the auto-epp application

Postswitch hook executed after mode switch.

Configuration written to $XDG_CONFIG_HOME/watson/config on Linux or $HOME/Library/Application Support/watson/config on Darwin

Configuration for /etc/gnupg/gpg-agent.conf

These settings are written to the agent.toml file

Refer to xrandr(1) for the documentation of the transform matrix.

Configuration written to $XDG_CONFIG_HOME/zellij/config.kdl

Configuration written to $XDG_CONFIG_HOME/gallery-dl/config.json

These settings are written to the agent.toml file

Settings for rimgo, see the official documentation for supported options.

Settings to be written to the configuration file

Settings to write to app.json.

Declare-able configurations for radio-active written to $XDG_CONFIG_HOME/radio-active/configs.ini.

logrotate freeform settings: each attribute here will define its own section, ordered by services.logrotate.settings.<name>.priority, which can either define files to rotate with their settings or settings common to all further files settings

Configuration written to $XDG_CONFIG_HOME/aichat/config.yaml on Linux or on Darwin if xdg.enable is set, otherwise ~/Library/Application Support/aichat/config.yaml

Searx settings

Settings for hickory-dns

Configuration written to $XDG_CONFIG_HOME/kraftkit/config.yaml.

Comodoro configuration

Output name to EDID mapping

Content of the Stubby configuration file

See GitHub for available settings.

Settings to include in the plugin's data.json.

Configuration included in starship.toml

The system-wide spacefm configuration

Settings to be written to the Cavalier configuration file

Configuration for Sherlock

Himalaya CLI global configuration

Screego settings passed as Nix attribute set, they will be merged with the defaults

List of Thunderbird profiles for which this account should be enabled

Configuration settings for Element's default profiles

Configuration settings for Onlyoffice

Free-form settings written directly to the acme-dns.cfg file

Generates the aria2.conf file

Whether to install a JSON formatted list of all Home Manager options

Default arguments to swaylock

Settings of g3proxy.

Settings for mailman.cfg

Configuration written to $XDG_CONFIG_HOME/MangoHud/MangoHud.conf

Configuration written to $XDG_CONFIG_HOME/starship.toml

Configuration written to $XDG_CONFIG_HOME/topgrade.toml

Written to XDG_CONFIG_HOME/Mullvad VPN/gui_settings.json or ~/Library/Application Support/Mullvad VPN/gui_settings.json

.env settings for Movim

Free-form settings written directly to the lldap_config.toml file

Settings for Wakapi

Configuration settings for walker

Free-form settings written to Draupnir's configuration file

The base-url for a self-hosted bitwarden installation.

Configuration for Nix; see nix.conf(5) for available options

This option is mapped to the main Privoxy configuration file

Configuration for workstyle

Configuration settings for anime-downloader

Configuration settings for the generated config json file

Settings for this slot.

Configuration written to $XDG_CONFIG_HOME/lazygit/config.yml on Linux or on Darwin if xdg.enable is set, otherwise ~/Library/Application Support/lazygit/config.yml

Settings for pgadmin4. Documentation

Settings of uMurmur

Database settings.

IO settings.

Configuration written to $XDG_CONFIG_HOME/opencode/opencode.json

Hyprlock configuration written in Nix

Named AWS profile used to connect to the API.

Username or emaill address for Pandora music service authentication

Free-form settings written directly to the config file

See configurationFile.

configurationFile takes precedence over settings.

List of Thunderbird profiles for which this account should be enabled

AeroSpace configuration, see https://nikitabobko.github.io/AeroSpace/guide#configuring-aerospace for supported values.

Human readable alias for your node.

Settings of OpenBao

Settings passed to OpenGFW. Example config

settings-local.yaml for private-gpt

YAML settings for maubot

This can be any key/value pair as described in https://github.com/justjanne/powerline-go.

Settings for the darkman command

Configuration written to $XDG_CONFIG_HOME/tealdeer/config.toml on Linux or $HOME/Library/Application Support/tealdeer/config.toml on Darwin

Configuration for H2O (see https://h2o.examp1e.net/configure.html)

Apply configurations for pianobar via key/value attributes

Settings to configure web service

Settings for evremap

Configuration written to $XDG_CONFIG_HOME/bluetuith/bluetuith.conf

Default arguments to waylogout

Configuration written to $XDG_CONFIG_HOME/fastfetch/config.jsonc

Configuration written to $XDG_CONFIG_HOME/spotify-player/app.toml

Settings for the public-inbox config file.

Settings for etesync-dav, passed as environment variables.

pretix configuration as a Nix attribute set

Configuration written to $XDG_CONFIG_HOME/keepassxc/keepassxc.ini

Suricata settings

As an alternative to specifying config, you can specify the path to the evaluated NixOS system configuration, typically a symlink to a system profile.

List of Thunderbird profiles for which this account should be enabled

Kafka broker configuration server.properties

Grafana settings

See torrc manual for documentation.

Contents of sssd.conf.

Options to add to .dir_colors file

Configuration written to $XDG_CONFIG_HOME/hyprpanel/config.json

Color configuration

Configuration for xdg-desktop-portal-wlr

Configuration for n8n, see https://docs.n8n.io/hosting/environment-variables/configuration-methods/ for supported values.

PowerDNS Recursor settings

Addresses to bind to and listen for inbound connections.

Extra configuration as nix values.

Thinkfan settings

niriswitcher configuration

Dolibarr settings, see https://github.com/Dolibarr/dolibarr/blob/develop/htdocs/conf/conf.php.example for details.

Settings for MediaMTX

Options passed to TLP

Additional settings to add to upsmon.conf.

Options stored in /etc/openvpn3/netcfg.json configuration file

Free-form settings written directly to the app.ini configfile file

Declare-able configurations for asciinema written to $XDG_CONFIG_HOME/asciinema/config.toml

Which pinentry interface to use

Configuration settings for lazyworktree

Lemmy configuration

AESM configuration

Stash configuration

Configuration for Nix, see https://nixos.org/manual/nix/stable/#sec-conf-file for avalaible options

Settings for Canaille

At attribute set of Vim settings

Settings for custom DNS providers.

Any extra options to add to i3status-rust config.

Settings that should be passed to rsync via long options

Configuration written to ~/.kube/color.yaml (Linux) or Library/Application Support/kube/color.yaml (Darwin)

The pass environment variables dictionary

Configuration for ntfy.sh, supported values are here.

Turn-rs server config file

Allowed MACs

Defaults to recommended settings from both https://stribika.github.io/2015/01/04/secure-secure-shell.html and https://infosec.mozilla.org/guidelines/openssh#modern-openssh-67

Configuration settings for the generated config file

The scaling behavior to use when using an image.

Configuration written to ~/.kube/switch-config.yaml.

See https://github.com/bitvora/haven for documentation.

Settings specific to this plugin.

Configuration written to $XDG_CONFIG_HOME/superfile/config.toml (linux) or Library/Application Support/superfile/config.toml (darwin), See https://superfile.netlify.app/configure/superfile-config/ for supported values.

Configuration written to $XDG_CONFIG_HOME/alacritty/alacritty.yml or $XDG_CONFIG_HOME/alacritty/alacritty.toml (the latter being used for alacritty 0.13 and later)

pretalx configuration as a Nix attribute set

Configuration for Lokinet

Settings to write to the dconf configuration system

Ethereum Swarm Bee configuration

Settings option for systemd-logind

Customize the default settings, refer to https://github.com/kanboard/kanboard/blob/main/config.default.php for details on supported values.

Configuration for dendrite, see: https://github.com/matrix-org/dendrite/blob/main/dendrite-sample.yaml for available options with which to populate settings.

.env settings for Pixelfed

Extra config options for user session service manager

Path to a JSON file containing settings that will be merged with the settings option

Specify the configuration for Envoy in Nix.

The port qui listens on.

Configuration for this library.

Server settings, refer to the documentation for available options

Configuration of the IFM service

Settings to merge with the default configuration

Whether to skip Discord's automatic update checks at startup

Settings for cockpit that will be saved in /etc/cockpit/cockpit.conf

Options to add to $XDG_CONFIG_HOME/translate-shell/init.trans file

Allows you to host Umami under a subdirectory

NotifyOSD settings

Komga configuration

Global configuration for angrr in TOML format.

Dunst configuration, see dunst(5)

The host address qui listens on.

Configuration for zrepl

The background color that will be used behind the chosen picture when it does not fill the screen.

Settings to configure wiki-js

Frp configuration, for configuration options see the example of client or server on github.

Configuration written to $XDG_CONFIG_HOME/wob/wob.ini

Configuration written to $XDG_CONFIG_HOME/television/config.toml

Configuration for isso

The global options in config file in yaml format

Attrset of daemon configuration

Declarative NATS configuration

PCAP replay settings.

Howdy configuration file

Configuration for Gonic, see https://github.com/sentriz/gonic#configuration-options for supported values.

Parameters for the msr kernel module.

Configuration of clatd

Configuration for plikd, see https://github.com/root-gg/plik/blob/master/server/plikd.cfg for supported values.

Configuration options for the /etc/omnom/config.yml file.

Application configuration for slskd

Configuration options to set in /etc/nipap/nipap.conf.

Configuration written to $XDG_CONFIG_HOME/dunst/dunstrc.

Configuration written to $XDG_CONFIG_HOME/pueue/pueue.yml.

Tomat configuration

See torrc manual.

script-directory config, for options take a look at the documentation

A set of values to be modified by kwriteconfig6

Port to listen on

Extra paperless config options

Settings to be rendered into the configuration file

Settings for Kanidm, see the documentation and example configuration for possible values.

cgit configuration, see cgitrc(5)

Karma dashboard configuration as nix attributes

Configuration for Hatsu, see

Gitea configuration

Configuration for TuneD

Configuration of uhub

XMRig configuration

Configuration to use for wluma

Port that the /debug/pprof endpoint will listen on.

Directory to store downloaded files.

See torrc manual.

See torrc manual.

See torrc manual.

Name of the database to use.

Options stored in /etc/openvpn3/log-service.json configuration file

General settings given to riverctl.

General configuration for NFS daemons and tools

See inadyn.conf (5)

INI configuration for Mbpfan.

Tealdeer can refresh the cache automatically when it is outdated

Configuration to be written to the libncf-nci configuration files

Configuration for wayprompt written to $XDG_CONFIG_HOME/wayprompt/config.ini

Kea DHCP6 configuration as a path, see https://kea.readthedocs.io/en/kea-3.0.2/arm/dhcp6-srv.html

Kea DHCP4 configuration as a path, see https://kea.readthedocs.io/en/kea-3.0.2/arm/dhcp4-srv.html

Configuration for nvme-rs in TOML format

Configuration for Gatus

Configuration for ulogd

Configuration for pgSCV, in YAML format

Specify the configuration for Tempo in Nix

This setting is the TCP port that is desired for the daemon to get assigned to.

Crab-holes config

Directories from the host filesystem to be included in the sandbox.

See torrc manual.

See torrc manual.

See torrc manual.

TCP port the process should listen to.

Directories from the host filesystem to be included in the sandbox.

Cryptpad configuration settings

Environment variables to set for the service

Structured cloud-init configuration.

Options for Kismet

Specify the configuration for Vector in Nix.

IPs the service should listen to.

This option defines the maximum number of jobs that Nix will try to build in parallel

This option defines the maximum number of jobs that Nix will try to build in parallel

The port to use.

The port to listen on.

Structured contents of the krb5.conf file

Configuration for unl0kr

The primary legit configuration

Additional configuration (environment variables) for Umami, see https://umami.is/docs/environment-variables for supported values.

Whether this setting is a global option or not: set to have these settings apply to all files settings with a higher priority.

Worker settings.

Renovate's global configuration

Global configuration options for streamlink

API key to use when modifying DNS records.

Runtime settings for AMDVLK to be configured /etc/amd/amdVulkanSettings.cfg

Configuration to add to this i3status module

Structured configurations of atticd

Please configuration

Garage configuration, see https://garagehq.deuxfleurs.fr/documentation/reference-manual/configuration/ for reference.

See torrc manual.

The port that Stash should listen on.

Settings which are applied to .gmailieer.json for the account

An optional SHA256 checksum of the desktop picture/wallpaper

Attribute set of Thunderbird preferences to be added to all profiles.

Settings for schleuder.yml

Configuration settings for hyprshell

Lutris system options for this runner

alice-lg configuration, for configuration options see the example on github

Kea DHCP4 configuration as an attribute set, see https://kea.readthedocs.io/en/kea-3.0.2/arm/dhcp4-srv.html.

Kea DHCP6 configuration as an attribute set, see https://kea.readthedocs.io/en/kea-3.0.2/arm/dhcp6-srv.html.

The settings Invidious should use

Nominatim configuration settings

Configuration for Hebbot, see, for examples:

• https://github.com/matrix-org/twim-config/blob/master/config.toml
• https://gitlab.gnome.org/Teams/Websites/thisweek.gnome.org/-/blob/main/hebbot/config.toml

Kavita configuration options, as configured in appsettings.json.

IP to bind the HTTP API on.

Configuration for Gancio, see https://gancio.org/install/config for supported values.

Contents of the dgraph config

Configuration for rsyncd

See CONFIGURATION section in wayvnc(1).

TLS backend to use.

Port to listen on (default: 443).

See torrc manual.

See torrc manual.

The ip address that Stash should bind to.

The main.cf configuration file as key value set

Rauc configuration that will be converted to INI

Filename of the Paisa database.

Email notification configuration

Static settings set in the config.toml, see https://github.com/knadh/listmonk/blob/master/config.toml.sample for details

Options to add to qutebrowser config.py file

Themes to install.

Blocky configuration

Configuration for Erigon Refer to https://github.com/ledgerwatch/erigon#usage for details on supported values.

greetd configuration (documentation) as a Nix attribute set.

GoBGP configuration

The contents of the configuration file for soft-serve

Configuration for Qdrant Refer to https://github.com/qdrant/qdrant/blob/master/config/config.yaml for details on supported values.

Gerrit configuration

Zeyple configuration. refer to https://github.com/infertux/zeyple/blob/master/zeyple/zeyple.conf.example for details on supported values.

Configuration to use for shpool

Ordered list of directives

YAML config that will override the default fusuma configuration.

Configuration for reaction

Port where lemmy should listen for incoming requests.

Hostname or socket-path to connect to.

Debug output to stderr.

See torrc manual.

Configuration written to $XDG_CONFIG_HOME/lazydocker/config.yml on Linux or on Darwin if xdg.enable is set, otherwise ~/Library/Application Support/jesseduffield/lazydocker/config.yml

URL of DID PLC directory

Database type.

The docker package to use

See https://git.sr.ht/~gheartsfield/nostr-rs-relay/#configuration for documentation.

Path to cache

PHP-FPM global directives

See https://github.com/Nefelim4ag/Ananicy/blob/master/ananicy.d/ananicy.conf

See https://app.radicle.xyz/nodes/seed.radicle.garden/rad:z3gqcJUoA1n9HaHKufZs5FCSGazv5/tree/radicle/src/node/config.rs#L275

Configuration for GoDNS

The sympa.conf configuration file as key value set

The absolute path to the configuration file

Runner specific options

Settings to write to appearance.json.

Settings for go-csp-collector

Whether to enable listening on the SSL port

Settings which are applied to mujmap.toml for the account

Settings for spacecookie

This option defines the maximum number of concurrent tasks during one build

This option defines the maximum number of concurrent tasks during one build

auditd configuration file contents

The configuration that Mopidy should use

Configuration options to set for the Strfry service

Configuration for MCHPRS via Config.toml

Config options for zenoh.json5 configuration file

Configuration written to a yaml file that is read by glance

Options for part-db configuration

Whether to add the activation script to the system profile

The database port

The database host

The database user

The database name

Path to paisa data directory.

See torrc manual.

See torrc manual.

See torrc manual.

See torrc manual.

HTTP network proxy.

Configuration file path.

Configuration written to $HOME/Library/Application Support/nvchecker/nvchecker.toml (on Darwin) or $XDG_CONFIG_HOME/nvchecker/nvchecker.toml (otherwise)

Parameters of freeciv-server.

The port to listen on

Port to bind to.

Configuration for sshd_config(5).

Neard INI-style configuration file as a Nix attribute set

The path to the password you will use in the Grafana webhook settings.

Allowed ciphers

Defaults to recommended settings from both https://stribika.github.io/2015/01/04/secure-secure-shell.html and https://infosec.mozilla.org/guidelines/openssh#modern-openssh-67

Extra settings merged in and overwriting defaults in config.ini.

General settings given to bspc config.

The available options can be found in the example configuration

Additional configuration to extend clight.conf

Configuration options to set in configuration.py

The primary sftpgo configuration

Configuration for Porn-Vault

PgHero configuration

Kea DHCP-DDNS configuration as an attribute set, see https://kea.readthedocs.io/en/kea-3.0.2/arm/ddns.html.

Configuration written to $XDG_CONFIG_HOME/mopidy/mopidy.conf

Configuration written to $XDG_CONFIG_HOME/swaync/config.json

The master.cf configuration file as an attribute set of service defitions

Environment variables to be passed

evcc configuration as a Nix attribute set

Configuration of Chhoto URL

Configuration of doh-server in toml

Configuration options for pihole.toml

Define new verbs

Listen port for the HTTP API.

libnfsidmap configuration

The theme package.

Modules to obtain Kerberos configuration from.

The HTTP listen port.

Recipient email address

Chat rooms to join on startup.

See torrc manual.

Xsettingsd options for configuration file

SMTP configuration section.

Configuration for LiteLLM

Additional settings passed straight through to PackageKit.conf

Extra environment variables passed to the zwave-js-ui process

Config options for dwm-status, see https://github.com/Gerschtli/dwm-status#configuration for available options.

The path to the desktop picture/wallpaper to set

Configuration file for the Samba suite in ini format

Artalk server listen port

Artalk server listen host

See biboumi 9.0

for documentation.

The hostname to use for the tsnet node.

See torrc manual.

Structured server daemon configuration

Structured client daemon configuration

The waagent.conf configuration, see https://learn.microsoft.com/en-us/azure/virtual-machines/extensions/agent-linux for documentation.

Configuration of Zipline

The port to which the server shall bind.

Hotkeys to configure.

Enable GPU monitoring.

Extra files to link to the vault directory.

The port to listen on.

The IPv4 address that the server will use on the network

qui configuration options

PHP-FPM pool directives

Configuration written to $XDG_CONFIG_HOME/plex-mpv-shim/config.json

Configuration of the Mealie service

Build veilid-server.conf with nix expression

go2rtc configuration as a Nix attribute set

The configuration to be written at $RECOLL_CONFDIR/recoll.conf

Extra settings merged in and overwriting defaults in sddm.conf.

Plugin settings to include.

HTTPS URL pattern used to generate links to view content on Radicle via the browser.

molly-brown configuration

The TCP port to serve the Gatus service at.

Define how much detail is supposed to be logged at runtime.

Global configuration options for the taler config file

Configuration written to $XDG_CONFIG_HOME/fnott/fnott.ini

Port the cross-seed daemon listens on.

Authentication cookie.

Enable SSL/TLS encryption.

See torrc manual.

SMTP server hostname.

The IPv6 address that the server will use on the network Leave this empty to let dsnet choose an address.

llama-swap configuration

Settings to pass to the livekit server

Kea Control Agent configuration as an attribute set, see https://kea.readthedocs.io/en/kea-3.0.2/arm/agent.html.

Bootstrap json to populate database

Whether to enable Whether TLS encryption should be used..

Additional configuration for Uptime Kuma, see https://github.com/louislam/uptime-kuma/wiki/Environment-Variables for supported values.

Autobrr configuration options

Configuration for Klipper

Additional configuration for Readeck, see https://readeck.org/en/docs/configuration for supported values.

Redmine configuration (configuration.yml)

Port for the server

Configuration for Misskey, see example.yml for all supported options.

Message of the day

Contents of the runtime configuration file

Vikunja configuration

Settings for DDNS providers built-in to inadyn

SMTP server port address.

Configuration written to a yaml file that is read by glance

The artalk configuration

General log level.

HTTP path for resolve application

See torrc manual.

Sender email address

The URL where you will access the app.

The path to MPD's database.

Listen on localhost:.

Options for the global systemd service manager

Options for systemd-homed

The user that you will authenticate with in the Grafana webhook settings

Manages the configuration files declaratively

Configuration for Nix, see https://nixos.org/manual/nix/stable/command-ref/conf-file.html or nix.conf(5) for available options

Configuration for Corteza, will be passed as environment variables

Configuration written to a json file that is read by orthanc

zeronet.conf configuration

Davmail configuration

Configuration of go-httpbin

Connection string for the PostgreSQL database

Whether to enable debug mode.

Whether to enable the OpenBao web UI.

Where to mount the MFS namespace to

Options for grocy's PHPFPM pool.

See torrc manual.

See torrc manual.

See torrc manual.

See torrc manual.

See torrc manual.

See torrc manual.

If false (the default), the desktop picture/wallpaper will be reset to the configured parameters on every system configuration change

Website title.

The database name.

NZBGet configuration, passed via command line using switch -o

Core plugins to activate.

The protocol to use when performing Git operations.

DID of bsky frontend

Startup script.

From address.

Timeout in seconds.

Cursor acceleration (how fast speed increases from minSpeed to maxSpeed)

List of additional portals that should be added to the environment

Configuration for peertube.

Quickwit configuration.

Warpgate configuration.

Configuration for spotifyd

Options to pass to the PAM module

The set of features supported by the machine

The identity url for your bitwarden installation.

Generate to config.json as a Nix attribute set

The global options in config file in ini format

Options passed to udisksd

Settings for the main CrowdSec configuration file

Configuration of goeland

Configuration for CoreRAD, see https://github.com/mdlayher/corerad/blob/main/internal/config/reference.toml for supported values

Merecat configuration

Configuration options for Sharkey

The sabnzbd configuration (see also sabnzbd's wiki for extra documentation)

As alternative to settings, you can provide whole configuration directly in the almost-YAML format of Knot DNS

PowerDNS Recursor settings

Set logging level: debug, info, warn, error.

The amount of time that your login information should be cached.

Attrset to be transformed into YAML for host config

Whether to enable the use of a daemon for TuneD.

location of your media files

Files to include in the Kerberos configuration.

Onion address.

See torrc manual.

Path to file containing OpenGFW settings.

GLPI Agent configuration options

URL of bsky frontend

SMTP username.

The port that ZITADEL listens on.

ZFS Event Daemon /etc/zfs/zed.d/zed.rc content

See zed(8) for details on ZED and the scripts in /etc/zfs/zed.d to find the possible variables

Enable logging

The port to listen on.

The host to listen on.

Additional opendkim configuration

Scrutiny settings to be rendered into the configuration file

Generates the server.cfg file

Settings which are written into mediagoblin.ini.

Configuration for haste-server

Zabbix Proxy configuration

Zabbix Agent configuration

The file mode creation mask is initialized to this value.

List of pages to be present on the dashboard

Settings for the sync server

Root path for log files.

Settings option for systemd-resolved

Text of the file.

The hotkey.

Whether to enable server authentication.

Where to mount the IPNS namespace to

List of enabled features in order.

Listen for clients on given port

Where to mount the IPFS namespace to

Whether to enable PAM authentication.

See torrc manual.

Port of the SMTP Server.

The port your Misskey server should listen on.

See torrc manual.

See torrc manual.

See torrc manual.

The port that Sharkey will listen on.

The port Xonotic will listen on.

Default PPD profile.

Extra configuration options for influxdb

Set of various configuration attributes

Configuration for OpenLDAP, in OLC format

Configuration for minidlna.conf(5).

Configuration file for hockeypuck, here you can override certain settings (loglevel and openpgp.db.dsn) by just setting those values

Listener config

mounts.conf configuration

Paisa configuration

Extra key-value pairs to add to the [Desktop Entry] section

The homebox configuration as environment variables

State transition definitions

Declarative Unbound configuration See the unbound.conf(5) manpage for a list of available options.

Configuration to be written to the osqueryd JSON configuration file

Configuration written to $XDG_CONFIG_HOME/udiskie/config.yml

Configuration written to $XDG_CONFIG_HOME/wpaperd/wallpaper.toml

Range of user IDs used for the creation of regular users by useradd or newusers.

Range of user IDs used for the creation of regular users by useradd or newusers.

Structural Kimai's local.yaml configuration

The ID generation method for Sharkey to use

Enable JSON-RPC/XML-RPC server.

Configuration for lxd-image-server

Configuration included in config.toml

The plugin.

CSS snippets to install.

Number of tries if upstream DNS fails

File to include additional settings for this provider from.

Whether to set the theme as active.

HedgeDoc configuration, see https://docs.hedgedoc.org/configuration/ for documentation.

See torrc manual.

Configuration of OliveTin

See torrc manual.

See torrc manual.

Configuration for RouteDNS, see https://github.com/folbricht/routedns/blob/master/doc/configuration.md for more information.

output attribute set.

Use systemd-journald

The sing-box configuration, see https://sing-box.sagernet.org/configuration/ for documentation

The PostgreSQL port.

The PostgreSQL host.

See https://www.freie-netze.org/wg-access-server/2-configuration/ for possible options

List of remappings.

The address to listen on.

The TTL ("Time to Live") value to set for your DNS records

If set, Nix will perform builds in a sandboxed environment that it will set up automatically for each build

vmalert configuration, passed via command line flags

Range of group IDs used for the creation of regular groups by useradd, groupadd, or newusers.

Range of group IDs used for the creation of regular groups by useradd, groupadd, or newusers.

A list of names of users that have additional rights when connecting to the Nix daemon, such as the ability to specify additional binary caches, or to import unsigned NARs

A list of names of users that have additional rights when connecting to the Nix daemon, such as the ability to specify additional binary caches, or to import unsigned NARs

Sonic Server configuration options

The ID generation method to use

Secret API key to use when modifying DNS records.

File used as configuration for traccar

Settings whose options overwrite fields in .config/transmission-daemon/settings.json (each time the service starts)

Settings for FileBrowser

Directory where legit will scan for repositories.

Main TCP port for RoomService and RTC endpoint.

If enabled (the default), Nix will only download binaries from binary caches if they are cryptographically signed with any of the keys listed in nix.settings.trusted-public-keys

If enabled (the default), Nix will only download binaries from binary caches if they are cryptographically signed with any of the keys listed in nix.settings.trusted-public-keys

Ergo IRC daemon configuration file. https://raw.githubusercontent.com/ergochat/ergo/master/default.yaml

Configuration for Spotifyd

Configuration for Netatalk

Configuration for spotifyd, see https://spotifyd.github.io/spotifyd/config/File.html for supported values.

Settings to include in /etc/buffyboard.conf

See torrc manual.

See torrc manual.

See torrc manual.

Museum yaml configuration

Host address.

Server name.

Legit port.

Repositories to ignore.

Display language of the frontend.

The primary patroni configuration

LiveKit configuration file expressed in nix

Configure Kanidm unix daemon

Configuration written to $XDG_CONFIG_HOME/shikane/config.toml. See for more information.

Settings of the onion service

Configuration for tiny-dfr

Set this to the URL where your cast page is running

A list of names of users (separated by whitespace) that are allowed to connect to the Nix daemon

A list of names of users (separated by whitespace) that are allowed to connect to the Nix daemon

Extra configuration options to append or override

Type of transition

The TCP port to use to connect to the local XMPP component.

Enable OAuth token exchange using RFC 8693.

Hostname of the SMTP server use for mail delivery.

Port of the SMTP server to use for mail delivery.

Spectrwm settings.

Attrset to be transformed into YAML for host config

Configuration for peroxide

Fediwall configuration

Additional configuration for FerretDB, see https://docs.ferretdb.io/configuration/flags/ for supported values.

Additional policy settings merged into the policy file

Whether to get IPv6 addresses from interfaces.

The user used for database authentication.

Netlink send buffer size.

The password used for database authentication.

Netlink receive buffer size.

The full configuration of the Hound daemon

The environment variables to configure Memos.

Set debug log level.

Readme files to look for.

HTTP port to listen on.

Port to bind nipapd to.

See torrc manual.

Add directories containing your adult videos and images

The path of the sqlite database.

Log file directories.

Settings serialized into user-data/conf.yml before build

Port to listen on

Address to the dashboard.

The port to listen on.

Configuration written to prismlauncher.cfg.

TCP port for eD2k connections

Additional settings for this bridge.

The full URL that the Sharkey instance will be publically accessible on

TLS key path.

Config options for the /etc/login.defs file, that defines the site-specific configuration for the shadow password suite

Additional policy settings merged into the policy file

Directory where aMule stores incomplete downloads (.part/.part.met files).

Range of user IDs used for the creation of system users by useradd or newusers.

Range of user IDs used for the creation of system users by useradd or newusers.

E-Mail address used in the FROM header of outgoing mails.

Global gitlab-runner configuration

Global configuration options for the libeufin bank system config file.

Temporal configuration

Configuration for Sshwifty

For development

Zabbix Server configuration

Disable latest file updates and enable sideloading.

Ludusavi configuration as an attribute set

Options to pass to the pam_rssh module

The port that Komga will listen on.

Directories where static files are located.

Omnom sender e-mail.

Configuration settings for Meilisearch

Text of the file.

Name of the snippet.

HTTP listen address and port

See torrc manual.

See torrc manual.

Contents for the TOML Polaris config, applied each start

Host to connect to.

List of zones to serve.

Configuration for the specific plugin, written to $XDG_CONFIG_HOME/streamlink/config. (linux) or Library/Application Support/streamlink/config. (darwin).

Tags to follow

Port to listen on.

Address to listen on.

Name of the database

Name of the database

User of the database

Host of the database

User of the database

Host of the database

Homepage settings

Attribute set of arbitrary config options

Configuration options for cross-seed

Attribute set of arbitrary config options

Attribute set of arbitrary config options

Enable CIS Hardening for RKE2

Range of group IDs used for the creation of system groups by useradd, groupadd, or newusers

Range of group IDs used for the creation of system groups by useradd, groupadd, or newusers

Configuration for auto-cpufreq

Dynamic settings in the PostgreSQL database, set by a SQL script, see https://github.com/knadh/listmonk/blob/master/schema.sql#L177-L230 for details.

Environment variables used for Castopod

Configuration for Radicale

MySQL configuration

Older PowerDNS Recursor settings

ClamAV configuration

Configuration for Prosody Filer

ioredis options

Address to bind to for handling DNS requests.

Web server port

User used for authentication.

See torrc manual.

Extra connection options.

MQTT server hostname

Address of the Kanidm server.

CAPI Configuration attributes

LAPI Configuration attributes

Configuration options to set in extra_settings.py.

Environment variables to set for the service

URL of crawlers

storage.conf configuration

How verbose should the logging be

See https://torsion.org/borgmatic/docs/reference/configuration/

Database driver to use for persistence

Database connection scheme

Additional attributes to be merged with the configuration options and written to Pangolin's config.yml file.

Your pinnwand.toml as a Nix attribute set

Configuration options for the postsrsd.conf file

The configuration to pass to Redshift

OpenID Connect settings

Path of the source file or directory.

The server will put all the budget files in this directory as binary blobs.

Whether to enable exit instead of restarting when a game ends.

The base URI below which your pretalx instance will be reachable.

Settings for zeronsd

Settings serialized into config.yml before build

Rathole configuration, for options reference see the example on GitHub

Frigate configuration as a nix attribute set

Structural DokuWiki configuration

The ffmpeg package to use for transcoding.

General log level.

See torrc manual.

Rest server configuration for Quickwit

Path to the pdftk executable.

Enable debug logging.

Port Number

The port to listen on

Port Number

Port Number

Path to the data directory

Path to target relative to the vault's directory.

Add timestamp log file

The configuration for the sourcehut network.

Bitmagnet configuration (https://bitmagnet.io/setup/configuration.html).

Configuration for tinyproxy.

List of directories where cross-seed will create links

Location of SMTP email server

Whether to disable reverse DNS lookups, thus keeping IP address literals in the log.

Whether to enable the plugin.

Settings which are written into paste.ini.

How many invites each user is issued upon registration (only applicable if open registration is disabled).

Attrset that is converted and passed as config file

The port your database is listening at. sqlite does not require this value to be filled.

Whether to allow writes to MSRs ("on") or not ("off").

Path to the TLS certificate private key.

The domain name of your instance (eg 'hatsu.local').

Host and port combination for the server to listen on.

Variables to be used within the suricata rules.

Seconds to wait before sending another request.

Cross platform libpcap capture support.

Configuration for immich-kiosk

Glance port to listen on

The DNS servers which dnsmasq should query.

The URL to the ntfy-sh topic.

Glance bind address

The full URL under which the server is reachable.

Main branch to look for.

See torrc manual.

Master configuration options (mfsmaster.cfg).

Path to the TLS certificate.

The Redis host.

Storage type.

The Redis port.

Settings to pass to the document exporter as CLI arguments.

Upstream timeout

Enable logging

The address to listen on.

By default pam-u2f module sets the application ID to pam://$HOSTNAME

Set to true if you want to send RST for blocked TCP connections, needs local = false.

The settings to use for XScreenSaver.

Set UDP listening port range used by DHT(IPv4, IPv6) and UDP tracker.

Additional configuration for MicroBin, see https://microbin.eu/docs/installation-and-configuration/configuration/ for supported values

Additional configuration for wastebin, see https://github.com/matze/wastebin#usage for supported values

Settings that go into ca.json

Path to config file to parse and append to settings

Directory where cross-seed will place torrent files it finds.

Port for the Web UI to listen on for incoming connections.

The installation’s full URL, without a trailing slash.

Address for the Web UI to listen on for incoming connections.

This is the name that will be displayed by NetworkManager and GUIs.

Full public URL of gitea server.

Save error/unfinished downloads to FILE on exit.

List of public keys used to sign binary caches

List of public keys used to sign binary caches

Instance hostname (base domain name)

configuration options for influxdb2, see https://docs.influxdata.com/influxdb/v2.0/reference/config-options for details.

The UNIX socket your Misskey server should listen on.

Filename of the main journal / ledger file.

Whether the app is behind a reverse proxy.

Configuration of GlitchTip

The content of /etc/supergfxd.conf

Configuration for Rosenpass, see https://rosenpass.eu/ for further information.

Options for mackerel-agent.conf

See torrc manual.

See torrc manual.

Configuration for Manticoresearch

Global configuration options for the mosquitto broker.

Configuration options for the Default Terminal Execution Specification

URL of DID PLC directory

Attributes of the parent entry.

Path to the SQLite database

Configuration for c2FmZQ-server passed as CLI arguments

Contents of the teleport.yaml config file

By default pam-u2f module does not inform user that he needs to use the u2f device, it just waits without a prompt

The app environment

scion-router configuration

scion-daemon configuration

API listen address, conforming to a Go address string.

Whether to enable guests to login if auth is enabled.

Contents of config file (sfsmaster.cfg(5)).

Configuration options for the Default Terminal Execution Specification

Root path for log files.

Configuration for IPP

Config file for swapspace

Configuration for Navidrome, see https://www.navidrome.org/docs/usage/configuration-options/ for supported values.

Extra options which should be appended to Nextcloud's config.php file.

Configuration for PgBouncer, see https://www.pgbouncer.org/config.html for supported values.

Configuration options of docs

The URL where you will access the app.

Location for the SQLite database.

The database dialect to use

IO queue size.

See torrc manual.

See torrc manual.

URL of the redis backend

URL of the redis backend

Whether to enable the snippet.

Path of the source file.

Contents of the config.yaml config file

Configuration options for the Stalwart server

Extra config options.

Additional configuration for transfer-sh, see https://github.com/dutchcoders/transfer.sh#usage-1 for supported values

Signature verification policy file

File to include additional settings for this provider from.

Attribute set of arbitrary config options

Settings to include in the plugin's data.json.

Configuration for etebase-server

Redis configuration

Generates the tuwunel.toml configuration file

Port number for HTTP traffic (descriptions, SOAP, media transfer).

freshclam configuration

The address to which the server shall bind, e.g. 0.0.0.0 or localhost.

FirewallD config file

Configuration for Moonraker

Mobilizon Elixir documentation, see https://docs.joinmobilizon.org/administration/configure/reference/ for supported values.

Typesense configuration

AeroSpace configuration, see

Configuration to use for Flameshot

Size limit of uploaded blobs in bytes

The domain name of your instance (eg 'lemmy.ml').

ISO 4217 code for the currency to display.

Use TLS for SMTP connection

A list of domains for which the proxy must not be used

Defines an alias for the output

The directory where pages are stored.

Hide posts from bot accounts

Domain name of your server.

Port on which the Node.js server should listen

The connection type defines the connection kind, like vpn, wireguard, gsm, wifi and more.

Attrset of the LibreNMS configuration

Configuration for Gemstash

Hypridle configuration written in Nix

Controls log level

Settings to generate easytier-‹name›.toml

The addon configures in conf folder in ini format with global sections

The addon configures in conf folder in ini format with global sections

Configuration for MPD

Declare systemd-tmpfiles rules to create, delete, and clean up volatile and temporary files and directories

Additional settings for this listener.

Set to false if you want to run OpenGFW on FORWARD chain. (e.g. on a router)

Sets the step between the points of the scroll acceleration function

Content of IfState's initrd configuration file

Base port -- others used are offset from this one, see https://docs.lizardbyte.dev/projects/sunshine/en/latest/about/advanced_usage.html#port for details.

Type of proxy to use

The final user-facing URL

See https://nvchecker.readthedocs.io/en/stable/usage.html#configuration-files

Flags from tlsrpt-fetcher(1) as key-value pairs.

Flags from tlsrpt-reportd(1) as key-value pairs.

An internet socket address to listen on, either IPv4 or IPv6.

If specified, creates a UNIX socket at the given path that Sharkey listens on.

Whether to enable printing /etc/motd when a user logs in interactively.

Configuration options of meet

Whether to use HTTPS for this DDNS provider.

Listen port

The public URL of the server, for password reset links.

Path to HTTPS listener private key.

Configuration settings for hyprlauncher

On which address Keycloak should accept new connections.

IP address to bind nipapd to.

Sets MangoHud settings per application

See torrc manual.

See torrc manual.

See torrc manual.

All settings of nginxlog expressed as an Nix attrset

Configure Kanidm clients, needed for the PAM daemon

The address that Sharkey binds to.

Usenet provider specification

Port Number

Specify a port number for JSON-RPC/XML-RPC server to listen to

The address to listen on

Sets the step between the points of the (pointer) motion acceleration function

Cursor acceleration (how fast speed increases from minSpeed to maxSpeed)

Environment variables for the Firezone server

IMAP authentication configuration for rspamd-trainer

An RKVM server's internet socket address, either IPv4 or IPv6.

The role of this server

UDP port for eD2k traffic (searches, source exchange) and all Kad network communication

Listen address

Configuration for create_ap

Configuration to put in watchdogd.conf

Path to store SSH host & client keys.

Scales the output by the specified scale factor.

On which port Keycloak should listen for new HTTP connections.

Port on which immich-kiosk will listen.

Content of IfState's configuration file

Run Suricata with a specific user-id.

The contents of Pomerium's config.yaml, in Nix expressions

Port where hatsu should listen for incoming requests.

Host where hatsu should listen for incoming requests.

Database file path.

See torrc manual.

Log level for Scrutiny.

Path to your SSL CA certificate.