The MODE determines which part of the NUT is to be started, and which configuration files must be modified

Mode to set for the SEV device.

Mode to set for devices of the msr kernel subsystem.

Mode to set for the SEV guest device.

Specify the bind mode that the bind is used in

DEPRECATED, use driverOptions

Which mode to use

Does the current path redirect a file or a directory?

Go telemetry mode to be set.

If set to something else than symlink, the file is copied instead of symlinked, with the given file mode.

Screen resolution in modedb format

Mode of operation

The mode of the macvlan device.

Mode in which to run the server.

'monolithic' runs all components, and is suitable for single-node deployments.

'api-server' runs only the API server, and is suitable for clustering.

'garbage-collector' only runs the garbage collector periodically

Choose the type of authentication used

Bar visibility mode.

Mode to set for the SGX provisioning device.

Bar visibility mode.

Permission of the socket file (3-digit octal value).

A video kernel parameter (framebuffer mode) configuration for the specific output:

<xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]

See for more information:

• https://docs.kernel.org/fb/modedb.html
• https://wiki.archlinux.org/title/Kernel_mode_setting#Forcing_modes

The resolution of the console

The mode in which the mapping takes effect.

Mail sending mode

Relay protocols.

<width>x<height>[@<rate>[Hz]]

Configures the specified output to use the specified mode

Blockchain garbage collection mode.

IPsec Mode to establish CHILD_SA with.

• tunnel negotiates the CHILD_SA in IPsec Tunnel Mode,
• whereas transport uses IPsec Transport Mode.
• transport_proxy signifying the special Mobile IPv6 Transport Proxy Mode.
• beet is the Bound End to End Tunnel mixture mode, working with fixed inner addresses without the need to include them in each packet.
• Both transport and beet modes are subject to mode negotiation; tunnel mode is negotiated if the preferred mode is not available.
• pass and drop are used to install shunt policies which explicitly bypass the defined traffic from IPsec processing or drop it, respectively

If the Suricata box is a router for the sniffed networks, set it to 'router'

Amazon CloudWatch Agent mode

The mode can be "file" or "database" that defines where the ACL policies are stored and read from.

"PWM" to enable PWM sync. "Manual" to set speed.

Encryption mode to use

Mode to be set on the UNIX socket

In what mode should the main Lovelace panel be, yaml or storage (UI managed).

Set the mode of the shell integration

<width>x<height>[@<rate>[Hz]]

Configures the specified output to use the specified mode

Defines the database mode of operation

Firewall mode to use.

Blockchain sync mode.

<width>x<height>[@<rate>[Hz]]

Configures the specified output to use the specified mode

The file access mode to use when creating this file or directory.

Blockchain sync mode.

Rendering mode of grafana-image-renderer:

• default: Creates on browser-instance per rendering request.
• reusable: One browser instance will be started and reused for each rendering request.
• clustered: allows to precisely configure how many browser-instances are supposed to be used

Output resolution.

Output resolution.

Keyboard model.

The file access mode to use when creating this file or directory.

File permissions on the UNIX domain socket.

The mode to use when discovering the available entities.

Modes to enable

Model path.

The user's home directory mode in numeric format

Key bindings mapping keys to commands in different modes

The sync mode influences how operations are committed to the disk log before the operation is acknowledged to the caller.

-ASYNC mode the writes to the disk log are buffered in memory by the operating system

The sync mode influences how operations are committed to the disk log before the operation is acknowledged to the caller.

-ASYNC mode the writes to the disk log are buffered in memory by the operating system

Enable this option to support certain USB WLAN and WWAN adapters

Models directory.

The gfxmode to pass to GRUB when loading a graphical boot interface under EFI.

The user's home directory mode in numeric format

The gfxmode to pass to GRUB when loading a graphical boot interface under BIOS.

The directory that the ollama service will read models from and download new models to.

The value full-apivfs (the default) sets up private /dev, /proc, /sys, /tmp and /var/tmp file systems in a separate user name space

X keyboard model.

The file ~/.background-image is used as a background image

Description of installed modems

SSL mode for the Postgres database.

Whether to enable necessary permission for Mihomo's systemd service for TUN mode to function properly

Which models to enable cmt for

Whether to enable GameMode to optimise system performance on demand.

Path to PCAP replay file

Whether to enable public mode.

Allow rooms to be moderated

Name of modem device, will be searched for in /dev.

Name of the model to download and use for speech synthesis

If the default of yes is used, Mode Config works in pull mode, where the initiator actively requests a virtual IP

If set to

• "true": all DNS lookups are DNSSEC-validated locally (excluding LLMNR and Multicast DNS)

Name of modem configuration file, will be searched for in config in the spooling area directory.

File permissions on the UNIX domain socket.

Models preset configuration as a Nix attribute set

On service or configuration errors that prevent Duo authentication, fail "safe" (allow access) or "secure" (deny access)

Whether to enable tournament mode

Whether to enable upsd.

Selects the authentication mode for this AP.

• "none": Don't configure any authentication

Password for accessing the database.

Whether to enable CAP_SYS_NICE on gamemoded to support lowering process niceness.

Attribute set of XFree86 Modelines automatically converted and exposed as edid/<name>.bin files in initrd

Enable append only mode

Mode where the socket should be set when protocol=socket

The model of the network device.

The model of the network device.

System-wide configuration for GameMode (/etc/gamemode.ini)

The soundmodem package to use.

Whether to launch Node-RED in --safe mode.

Whether to add Soundmodem to the global environment and configure a wrapper for 'soundmodemconfig' for users in the 'soundmodem' group.

List of supported models on the server, with model-specific configs.

An attribute set that defines binding modes and keybindings inside them

Only basic keybinding is supported (bindsym keycomb action), for more advanced setup use 'sway.extraConfig'.

Add :map mappings to zathura and make them permanent

(Deprecated) This option, if set, activates the VESA 800x600 video mode on boot and disables kernel modesetting

An attribute set that defines binding modes and keybindings inside them

Only basic keybinding is supported (bindsym keycomb action), for more advanced setup use 'i3.extraConfig'.

Whether to invoke grub-install with --removable

The modemmanager package to use.

Whether to enable upsmon.

Whether to enable emergency mode, which is an sulogin shell started on the console if mounting a filesystem fails

Whether to run the machine in rootful mode

Color mode for vivid.

uWSGI configuration

Attribute set of values for the given modem

In this mode, Vault runs in-memory and starts unsealed

Whether to enable kernel modesetting when using the NVIDIA proprietary driver

Whether to use ModemManager to manage modem devices

Whether to use TLS wrapper-mode.

Whether to run the rspamd daemon in debug mode.

Specifies when a server connection can be reused by other clients.

session Server is released back to pool after client disconnects

Location of the ppd driver file for the printer. lpinfo -m shows a list of supported models.

Specify the model that tabby will use to generate completions

The maximum expiry delay in seconds to force in public mode.

Enable vim style keybindings for copy mode, and navigation of tmux panes.

Run this program in a single process mode for debugging purpose

Whether to use sign the limine binary with sbctl.

List of FCC unlock scripts to enable on the system, behaving as described in https://modemmanager.org/docs/modemmanager/fcc-unlock/#integration-with-third-party-fcc-unlock-tools.

Listen on path or localhost port in discovery mode.

vid:pid of either the PCI or USB vendor and product ID

Path to the unlock script

Whether to enable Setcap for TUN Mode

Whether to enable spy mode, useful for wireless monitors.

Whether to enable silent mode, that is, disabling direnv logging.

Define a common behavior for all exception policies

Which mode to use for sending mail

Whether to run the server in debug mode.

The list of data directories or nodes for storing the objects

Change current mode after bind is executed

Enable FIPS 140-2 mode required for compliance.

The user file mode creation mask to use on home directories newly created by pam_mkhomedir.

Whether to enable nvidia-persistenced a update for NVIDIA GPU headless mode, i.e

File mode of the socket.

Enable debug mode.

Whether to enable TUN mode of Throne.

Options to configure Go telemetry mode.

Set to 'Dark' to enable dark mode

Extends the systemd unit with permissions to allow for the use of the eXpress Data Path (XDP).

Whether to enable light mode theme.

Unix command socket that can be used to pass commands to Suricata

Start up in disconnected mode

Whether to enable Service Mode.

Whether to enable darkman, a tool that automatically switches dark-mode on and off based on the time of the day.

Port to listen on.

For Postgres, use either disable, require or verify-full

User name under which the modemmanager exporter shall be run.

Controls the addon manager reconciliation mode for the DNS addon

Whether to enable LACT, a tool for monitoring, configuring and overclocking GPUs.

Whether to operate in tun (IP) or tap (Ethernet) mode.

Permissions on the UNIX socket.

Group under which the modemmanager exporter shall be run.

Whether to enable TUN mode of nekoray.

GID of created file

UID of created file

The font hinting mode.

Whether to enable the prometheus modemmanager exporter.

Set true for offline mode.

Operate in single user mode, disables all functionality related to multiple users and authentication

Set the execute bit

Thread mode keybindings.

Search mode keybindings.

Whether to run searx in uWSGI as a "vassal", instead of using its built-in HTTP server

Whether to support multi-user mode by enabling the Disnix D-Bus service

Kernel commandline arguments

Whether to enable modal (vim) mode.

Extra commandline options to pass to the modemmanager exporter.

Path under which the stats socket is placed

Enable discovery operation mode.

Run Stargazer in debug mode.

Set the execute bit

For sqlite3 only. Shared cache setting used for connecting to the database.

Enables Aggressive Mode instead of Main Mode with Identity Protection

Background image used for GRUB

Whether k3s should run as a server or agent

Allows specifying if weechat should run in TUI or headless mode.

AppArmor mode for dbus.

enabled enables mediation when it's supported in the kernel, disabled always disables AppArmor even with kernel support, and required fails when AppArmor was not found in the kernel.

Whether to enable debug mode.

By default this service only changes the first packet sent, which is enough in most cases

Whether to format log dirs in KRaft mode if all log dirs are unformatted, ie. they contain no meta.properties.

Initrd path

Kernel path

Set the execute bit

Taglist mode keybindings.

Set the execute bit

Paths to the Nix profile

Address to listen on.

The file mode creation mask is initialized to this value.

KRaft mode ClusterId used for formatting log directories

Open port in firewall for incoming connections.

How frequently ModemManager will refresh the extended signal quality information for each modem

Minimalist user interface mode.

Whether the member list should be overwritten each time (true) or appended (false)

URI to connect to the API

Disables scan for overlapping BSSs in HT40+/- mode

Set the execute bit

Specify rules for nftables to add to the input chain when services.prometheus.exporters.modemmanager.openFirewall is true.

The hostname or IP of the cable modem.

Binds to execute the sway command command on state changes

The TLS mode to use

Scripts to run when switching to "dark mode"

Envelope mode keybindings.

The date indicating the date at which the modefile was updated, in YYYY-MM-DD format

Specify a filter for iptables to use when services.prometheus.exporters.modemmanager.openFirewall is true

User name of file owner

Determine whether the mounted path will be accessed in read-only mode.

ReplayGain mode.

Disable email debug mode to start sending outgoing mails

Scripts to run when switching to "light mode"

Name of the voice model to use

Group name of file owner

Whether to enable amdgpu overdrive mode for overclocking.

Sets the send events mode to disabled, enabled, or disabled-on-external-mouse

Some systems require a /sbin/init script which is started

Enables entering fullscreen mode by pressing F11.

Whether to enable automatic HiDPI mode.

The file mode creation mask for Aria2 service

Server mode ghostunnels (TLS listener -> plain TCP/UNIX target)

Broker ID. -1 or null to auto-allocate in zookeeper mode.

Whether to enable Quiet mode (no output from the library).

The file access mode of the UNIX socket.

Whether to enable agent mode.

Path to the HQPlayer license key file

Makes this policy trust all remote parties

Use DEV as eBUS device [/dev/ttyUSB0]

Enables fallback update mode where tt-rss tries to update feeds in background while tt-rss is open in your browser

The path of the Searx server settings.yml file

Whether the node will be put in the center, in floating mode.

The path to a file or AF_UNIX stream socket to read the server certificate from

'Static' authentication secret value (a string) for TURN REST API only

Bufferlist mode keybindings.

DEPRECATED, use driverOptions

Whether to run searx in uWSGI as a "vassal", instead of using its built-in HTTP server

Whether to run the SpamAssassin daemon in debug mode

Whether to hide url hints not matching input in url hints mode.

The default bar mode when 'bar.mode' == 'hide'.

Whether to enable HBase master in standalone mode with embedded regionserver and zookeper

Once this mode is on, Dragonfly will evict items least likely to be stumbled upon in the future but only when it is near maxmemory limit.

Debug mode, return more verbose errors, reload templates on each request.

Whether to enable The tuxedo-drivers driver enables access to the following on TUXEDO notebooks:

• Driver for Fn-keys
• SysFS control of brightness/color/mode for most TUXEDO keyboards
• Hardware I/O driver for TUXEDO Control Center

For more inforation it is best to check at the source code description: https://gitlab.com/tuxedocomputers/development/packages/tuxedo-drivers .

Run in insecure mode.

This optional key specifies the mode of the socket

The default bar mode when 'bar.mode' == 'hide'.

Preswitch hook executed before mode switch.

Whether to enable "ready mode"; where players can pause/unpause the game and start the game in warmup, using their ready state.

Preswitch hook executed before mode switch.

Whether to enable the broken-device-safety, otherwise known as read-only mode

Sets the send events mode to disabled, enabled, or disabled-on-external-mouse

The path to the list of CSV files to use when generating the CDI specification in CSV mode.

Whether to enable 4-address mode with type managed.

Hostname of a waiting vpicc server vpcd will be connecting to

Prometheus Alertmanager URL

• menu shows the menu.
• countdown uses a text-mode countdown.
• hidden hides GRUB entirely

The cursor blink mode.

The sub-pixel rendering mode.

Override the hjkl and HJKL bindings for pane navigation and resizing in VI mode.

Set to true for unauthenticated emergency access, and false or null for no emergency access

Enables whitelist mode.

Start a desktop environment instead of seamless mode

Override the hjkl and HJKL bindings for pane navigation and resizing in VI mode.

If the mode is set to "file", the path to a HuJSON file containing ACL policies.

Enable week numbers in calendar and interactive (ikhal) mode

Postswitch hook executed after mode switch.

Don't allow users to connect in non-secure mode (without random padding).

The hosts.hfaxd file entry in the spooling area will be symlinked to the location given here

Postswitch hook executed after mode switch.

Whether to generate the password files at build time and store them directly in the system closure, without requiring any services at boot time

The permissions of the wrapper program

The network mode or network/s to connect the container to

Whether to enable starting teleport in insecure mode

Border, background and text color for the binding mode indicator

Configures the trackpad tap behavior

This optional key specifies the mode of the socket